96 files changed, 3499 insertions, 5 deletions

diff --git a/platforms/chibios/BLACKPILL_STM32_F401/board/board.mk b/platforms/chibios/boards/BLACKPILL_STM32_F401/board/board.mk
index fddf7dace4..fddf7dace4 100644
--- a/platforms/chibios/BLACKPILL_STM32_F401/board/board.mk
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F401/board/board.mk
diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/board.h b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h
index 30af6b0c86..30af6b0c86 100644
--- a/platforms/chibios/BLACKPILL_STM32_F401/configs/board.h
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/board.h
diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/bootloader_defs.h b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h
index 4da3d39a32..4da3d39a32 100644
--- a/platforms/chibios/BLACKPILL_STM32_F401/configs/bootloader_defs.h
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h
diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/config.h
index e181422eba..e181422eba 100644
--- a/platforms/chibios/BLACKPILL_STM32_F401/configs/config.h
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/config.h
diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/mcuconf.h
index ba6e934fe7..ba6e934fe7 100644
--- a/platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/mcuconf.h
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/board/board.mk b/platforms/chibios/boards/BLACKPILL_STM32_F411/board/board.mk
index bb00b1a2b0..bb00b1a2b0 100644
--- a/platforms/chibios/BLACKPILL_STM32_F411/board/board.mk
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F411/board/board.mk
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/board.h b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/board.h
index 30af6b0c86..30af6b0c86 100644
--- a/platforms/chibios/BLACKPILL_STM32_F411/configs/board.h
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/board.h
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/bootloader_defs.h b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h
index 4da3d39a32..4da3d39a32 100644
--- a/platforms/chibios/BLACKPILL_STM32_F411/configs/bootloader_defs.h
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/config.h
index e181422eba..e181422eba 100644
--- a/platforms/chibios/BLACKPILL_STM32_F411/configs/config.h
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/config.h
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/mcuconf.h
index 0394ff56bb..0394ff56bb 100644
--- a/platforms/chibios/BLACKPILL_STM32_F411/configs/mcuconf.h
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/mcuconf.h
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld b/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld
index 82253d3de5..82253d3de5 100644
--- a/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xC_tinyuf2.ld
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld b/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld
index 1656c67bf7..1656c67bf7 100644
--- a/platforms/chibios/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld
+++ b/platforms/chibios/boards/BLACKPILL_STM32_F411/ld/STM32F411xE_tinyuf2.ld
diff --git a/platforms/chibios/GENERIC_STM32_F042X6/board/board.c b/platforms/chibios/boards/GENERIC_STM32_F042X6/board/board.c
index 0d7c88756a..0d7c88756a 100644
--- a/platforms/chibios/GENERIC_STM32_F042X6/board/board.c
+++ b/platforms/chibios/boards/GENERIC_STM32_F042X6/board/board.c
diff --git a/platforms/chibios/GENERIC_STM32_F042X6/board/board.h b/platforms/chibios/boards/GENERIC_STM32_F042X6/board/board.h
index ee9d31e04a..ee9d31e04a 100644
--- a/platforms/chibios/GENERIC_STM32_F042X6/board/board.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F042X6/board/board.h
diff --git a/platforms/chibios/GENERIC_STM32_F042X6/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F042X6/board/board.mk
index 842e335905..842e335905 100644
--- a/platforms/chibios/GENERIC_STM32_F042X6/board/board.mk
+++ b/platforms/chibios/boards/GENERIC_STM32_F042X6/board/board.mk
diff --git a/platforms/chibios/GENERIC_STM32_F042X6/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h
index 25113425a6..25113425a6 100644
--- a/platforms/chibios/GENERIC_STM32_F042X6/configs/bootloader_defs.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h
diff --git a/platforms/chibios/GENERIC_STM32_F042X6/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/config.h
index a73f0c0b47..a73f0c0b47 100644
--- a/platforms/chibios/GENERIC_STM32_F042X6/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/config.h
diff --git a/platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/mcuconf.h
index 286e1230ce..286e1230ce 100644
--- a/platforms/chibios/GENERIC_STM32_F042X6/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/mcuconf.h
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F072XB/board/board.mk
index 3f0e6c46e8..3f0e6c46e8 100644
--- a/platforms/chibios/GENERIC_STM32_F072XB/board/board.mk
+++ b/platforms/chibios/boards/GENERIC_STM32_F072XB/board/board.mk
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/board.h
index 30af6b0c86..30af6b0c86 100644
--- a/platforms/chibios/GENERIC_STM32_F072XB/configs/board.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/board.h
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h
index dccd0fa5d1..dccd0fa5d1 100644
--- a/platforms/chibios/GENERIC_STM32_F072XB/configs/bootloader_defs.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/config.h
index a73f0c0b47..a73f0c0b47 100644
--- a/platforms/chibios/GENERIC_STM32_F072XB/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/config.h
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/mcuconf.h
index 32b2777a81..32b2777a81 100644
--- a/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/mcuconf.h
diff --git a/platforms/chibios/GENERIC_STM32_F303XC/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F303XC/board/board.mk
index f891e65247..f891e65247 100644
--- a/platforms/chibios/GENERIC_STM32_F303XC/board/board.mk
+++ b/platforms/chibios/boards/GENERIC_STM32_F303XC/board/board.mk
diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/board.h
index 97159964d0..97159964d0 100644
--- a/platforms/chibios/GENERIC_STM32_F303XC/configs/board.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/board.h
diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h
index 87ac7b10dc..87ac7b10dc 100644
--- a/platforms/chibios/GENERIC_STM32_F303XC/configs/bootloader_defs.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h
diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/config.h
index a73f0c0b47..a73f0c0b47 100644
--- a/platforms/chibios/GENERIC_STM32_F303XC/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/config.h
diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h
index c6f5a8ac52..c6f5a8ac52 100644
--- a/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/mcuconf.h
diff --git a/platforms/chibios/boards/GENERIC_STM32_F407XE/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F407XE/board/board.mk
new file mode 100644
index 0000000000..6c837bb8ee
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/board/board.mk
@@ -0,0 +1,9 @@
+# List of all the board related files.
+BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC  += $(BOARDINC)
\ No newline at end of file
diff --git a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/board.h
new file mode 100644
index 0000000000..22c4e4cd7e
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/board.h
@@ -0,0 +1,24 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define STM32_HSECLK 8000000
+// The following is required to disable the pull-down on PA9, when PA9 is used for the keyboard matrix:
+#define BOARD_OTG_NOVBUSSENS
+
+#include_next "board.h"
+
+#undef STM32_HSE_BYPASS
\ No newline at end of file
diff --git a/platforms/chibios/GENERIC_STM32_F446XE/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h
index cc52a953ed..cc52a953ed 100644
--- a/platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h
diff --git a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h
new file mode 100644
index 0000000000..4be47fe1b0
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h
@@ -0,0 +1,355 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+#define STM32F405_MCUCONF
+#define STM32F415_MCUCONF
+#define STM32F407_MCUCONF
+#define STM32F417_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    8
+#define STM32_PLLN_VALUE                    336
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    7
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY            6
+#define STM32_IRQ_EXTI1_PRIORITY            6
+#define STM32_IRQ_EXTI2_PRIORITY            6
+#define STM32_IRQ_EXTI3_PRIORITY            6
+#define STM32_IRQ_EXTI4_PRIORITY            6
+#define STM32_IRQ_EXTI5_9_PRIORITY          6
+#define STM32_IRQ_EXTI10_15_PRIORITY        6
+#define STM32_IRQ_EXTI16_PRIORITY           6
+#define STM32_IRQ_EXTI17_PRIORITY           15
+#define STM32_IRQ_EXTI18_PRIORITY           6
+#define STM32_IRQ_EXTI19_PRIORITY           6
+#define STM32_IRQ_EXTI20_PRIORITY           6
+#define STM32_IRQ_EXTI21_PRIORITY           15
+#define STM32_IRQ_EXTI22_PRIORITY           15
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_PRESA_VALUE               32
+#define STM32_RTC_PRESS_VALUE               1024
+#define STM32_RTC_CR_INIT                   0
+#define STM32_RTC_TAMPCR_INIT               0
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_SDIO_DMA_PRIORITY         3
+#define STM32_SDC_SDIO_IRQ_PRIORITY         9
+#define STM32_SDC_WRITE_TIMEOUT_MS          1000
+#define STM32_SDC_READ_TIMEOUT_MS           1000
+#define STM32_SDC_CLOCK_ACTIVATION_DELAY    10
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT    TRUE
+#define STM32_SDC_SDIO_DMA_STREAM           STM32_DMA_STREAM_ID(2, 3)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  TRUE
+#define STM32_USB_USE_OTG2                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_HOST_WAKEUP_DURATION      2
+
+#define STM32_USB_OTG_THREAD_PRIO           NORMALPRIO+1
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */
diff --git a/platforms/chibios/GENERIC_STM32_F446XE/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F446XE/board/board.mk
index 57897941ca..57897941ca 100644
--- a/platforms/chibios/GENERIC_STM32_F446XE/board/board.mk
+++ b/platforms/chibios/boards/GENERIC_STM32_F446XE/board/board.mk
diff --git a/platforms/chibios/GENERIC_STM32_F446XE/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/board.h
index 80dfcffa99..80dfcffa99 100644
--- a/platforms/chibios/GENERIC_STM32_F446XE/configs/board.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/board.h
diff --git a/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h
new file mode 100644
index 0000000000..cc52a953ed
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h
@@ -0,0 +1,23 @@
+/* Copyright 2021 Andrei Purdea
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+#    define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif
diff --git a/platforms/chibios/GENERIC_STM32_F446XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/mcuconf.h
index d2de75590e..d2de75590e 100644
--- a/platforms/chibios/GENERIC_STM32_F446XE/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/mcuconf.h
diff --git a/platforms/chibios/GENERIC_STM32_G431XB/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_G431XB/board/board.mk
index 0acbcd83c7..0acbcd83c7 100644
--- a/platforms/chibios/GENERIC_STM32_G431XB/board/board.mk
+++ b/platforms/chibios/boards/GENERIC_STM32_G431XB/board/board.mk
diff --git a/platforms/chibios/GENERIC_STM32_G431XB/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/config.h
index 39ce627e77..39ce627e77 100644
--- a/platforms/chibios/GENERIC_STM32_G431XB/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/config.h
diff --git a/platforms/chibios/GENERIC_STM32_G431XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h
index 182d4885d7..182d4885d7 100644
--- a/platforms/chibios/GENERIC_STM32_G431XB/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h
diff --git a/platforms/chibios/GENERIC_STM32_G474XE/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_G474XE/board/board.mk
index 957adf509b..957adf509b 100644
--- a/platforms/chibios/GENERIC_STM32_G474XE/board/board.mk
+++ b/platforms/chibios/boards/GENERIC_STM32_G474XE/board/board.mk
diff --git a/platforms/chibios/GENERIC_STM32_G474XE/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/config.h
index eb74d68e85..eb74d68e85 100644
--- a/platforms/chibios/GENERIC_STM32_G474XE/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/config.h
diff --git a/platforms/chibios/GENERIC_STM32_G474XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h
index 117e920e3b..117e920e3b 100644
--- a/platforms/chibios/GENERIC_STM32_G474XE/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h
diff --git a/platforms/chibios/GENERIC_STM32_L433XC/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_L412XB/board/board.mk
index 1250385eb8..1250385eb8 100644
--- a/platforms/chibios/GENERIC_STM32_L433XC/board/board.mk
+++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/board/board.mk
diff --git a/platforms/chibios/GENERIC_STM32_L433XC/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h
index 51f9724f94..2e37d95fe3 100644
--- a/platforms/chibios/GENERIC_STM32_L433XC/configs/board.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/board.h
@@ -19,6 +19,6 @@
 
 #undef STM32L432xx
 
-// Pretend that we're an L443xx as the ChibiOS definitions for L432/L433 mistakenly don't enable GPIOH, I2C2, or SPI2.
+// Pretend that we're an L443xx as the ChibiOS definitions for L4x2/L4x3 mistakenly don't enable GPIOH, I2C2, or SPI2.
 // Until ChibiOS upstream is fixed, this should be kept at L443, as nothing in QMK currently utilises the crypto peripheral on the L443.
 #define STM32L443xx
diff --git a/platforms/chibios/GENERIC_STM32_L433XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h
index c27c61b19a..c27c61b19a 100644
--- a/platforms/chibios/GENERIC_STM32_L433XC/configs/config.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h
diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h
new file mode 100644
index 0000000000..8ad5a8da21
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/mcuconf.h
@@ -0,0 +1,282 @@
+/*
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * STM32L4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+#define STM32L4xx_MCUCONF
+#define STM32L412_MCUCONF
+#define STM32L422_MCUCONF
+#define STM32L432_MCUCONF
+#define STM32L433_MCUCONF
+#define STM32L442_MCUCONF
+#define STM32L443_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_VOS                           STM32_VOS_RANGE1
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI16_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_MSIPLL_ENABLED                FALSE
+#define STM32_ADC_CLOCK_ENABLED             TRUE
+#define STM32_USB_CLOCK_ENABLED             TRUE
+#define STM32_SAI1_CLOCK_ENABLED            TRUE
+#define STM32_SAI2_CLOCK_ENABLED            TRUE
+#define STM32_MSIRANGE                      STM32_MSIRANGE_4M
+#define STM32_MSISRANGE                     STM32_MSISRANGE_4M
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI16
+#define STM32_PLLM_VALUE                    4
+#define STM32_PLLN_VALUE                    80
+#define STM32_PLLP_VALUE                    7
+#define STM32_PLLQ_VALUE                    4
+#define STM32_PLLR_VALUE                    4
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV1
+#define STM32_PPRE2                         STM32_PPRE2_DIV1
+#define STM32_STOPWUCK                      STM32_STOPWUCK_MSI
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_LSCOSEL                       STM32_LSCOSEL_NOCLOCK
+#define STM32_PLLSAI1N_VALUE                72
+#define STM32_PLLSAI1P_VALUE                7
+#define STM32_PLLSAI1Q_VALUE                6
+#define STM32_PLLSAI1R_VALUE                6
+#define STM32_PLLSAI2N_VALUE                72
+#define STM32_PLLSAI2P_VALUE                7
+#define STM32_PLLSAI2R_VALUE                6
+
+/*
+ * Peripherals clock sources.
+ */
+#define STM32_USART1SEL                     STM32_USART1SEL_SYSCLK
+#define STM32_USART2SEL                     STM32_USART2SEL_SYSCLK
+#define STM32_USART3SEL                     STM32_USART3SEL_SYSCLK
+#define STM32_UART4SEL                      STM32_UART4SEL_SYSCLK
+#define STM32_UART5SEL                      STM32_UART5SEL_SYSCLK
+#define STM32_LPUART1SEL                    STM32_LPUART1SEL_SYSCLK
+#define STM32_I2C1SEL                       STM32_I2C1SEL_SYSCLK
+#define STM32_I2C2SEL                       STM32_I2C2SEL_SYSCLK
+#define STM32_I2C3SEL                       STM32_I2C3SEL_SYSCLK
+#define STM32_LPTIM1SEL                     STM32_LPTIM1SEL_PCLK1
+#define STM32_LPTIM2SEL                     STM32_LPTIM2SEL_PCLK1
+#define STM32_SAI1SEL                       STM32_SAI1SEL_OFF
+#define STM32_SAI2SEL                       STM32_SAI2SEL_OFF
+#define STM32_CLK48SEL                      STM32_CLK48SEL_HSI48
+#define STM32_ADCSEL                        STM32_ADCSEL_SYSCLK
+#define STM32_SWPMI1SEL                     STM32_SWPMI1SEL_PCLK1
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY            6
+#define STM32_IRQ_EXTI1_PRIORITY            6
+#define STM32_IRQ_EXTI2_PRIORITY            6
+#define STM32_IRQ_EXTI3_PRIORITY            6
+#define STM32_IRQ_EXTI4_PRIORITY            6
+#define STM32_IRQ_EXTI5_9_PRIORITY          6
+#define STM32_IRQ_EXTI10_15_PRIORITY        6
+#define STM32_IRQ_EXTI1635_38_PRIORITY      6
+#define STM32_IRQ_EXTI18_PRIORITY           6
+#define STM32_IRQ_EXTI19_PRIORITY           6
+#define STM32_IRQ_EXTI20_PRIORITY           6
+#define STM32_IRQ_EXTI21_22_PRIORITY        15
+
+#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY   7
+#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY    7
+#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
+#define STM32_IRQ_TIM1_CC_PRIORITY          7
+#define STM32_IRQ_TIM2_PRIORITY             7
+#define STM32_IRQ_TIM6_PRIORITY             7
+#define STM32_IRQ_TIM7_PRIORITY             7
+
+#define STM32_IRQ_USART1_PRIORITY           12
+#define STM32_IRQ_USART2_PRIORITY           12
+#define STM32_IRQ_USART3_PRIORITY           12
+#define STM32_IRQ_LPUART1_PRIORITY          12
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC123_CLOCK_MODE         ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC123_PRESC              ADC_CCR_PRESC_DIV2
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(2, 4)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 4)
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM15                 FALSE
+#define STM32_GPT_USE_TIM16                 FALSE
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM15                 FALSE
+#define STM32_ICU_USE_TIM16                 FALSE
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM15                 FALSE
+#define STM32_PWM_USE_TIM16                 FALSE
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_PRESA_VALUE               32
+#define STM32_RTC_PRESS_VALUE               1024
+#define STM32_RTC_CR_INIT                   0
+#define STM32_RTC_TAMPCR_INIT               0
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_LPUART1            FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_LPUART1_PRIORITY       12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 1)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 2)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * TRNG driver system settings.
+ */
+#define STM32_TRNG_USE_RNG1                 FALSE
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 6)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+/*
+ * WSPI driver system settings.
+ */
+#define STM32_WSPI_USE_QUADSPI1             FALSE
+#define STM32_WSPI_QUADSPI1_DMA_STREAM      STM32_DMA_STREAM_ID(2, 7)
+#define STM32_WSPI_QUADSPI1_PRESCALER_VALUE 1
+
+#endif /* MCUCONF_H */
diff --git a/platforms/chibios/boards/GENERIC_STM32_L433XC/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_L433XC/board/board.mk
new file mode 100644
index 0000000000..1250385eb8
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_L433XC/board/board.mk
@@ -0,0 +1,9 @@
+# List of all the board related files.
+BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_L432KC/board.c
+
+# Required include directories
+BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_L432KC
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC  += $(BOARDINC)
diff --git a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/board.h
new file mode 100644
index 0000000000..2e37d95fe3
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/board.h
@@ -0,0 +1,24 @@
+/* Copyright 2018-2021 Harrison Chan (@Xelus)
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include_next "board.h"
+
+#undef STM32L432xx
+
+// Pretend that we're an L443xx as the ChibiOS definitions for L4x2/L4x3 mistakenly don't enable GPIOH, I2C2, or SPI2.
+// Until ChibiOS upstream is fixed, this should be kept at L443, as nothing in QMK currently utilises the crypto peripheral on the L443.
+#define STM32L443xx
diff --git a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h
new file mode 100644
index 0000000000..c27c61b19a
--- /dev/null
+++ b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h
@@ -0,0 +1,26 @@
+/* Copyright 2018-2021 Harrison Chan (@Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606.
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
+
+#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH
+
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+#    define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif
diff --git a/platforms/chibios/GENERIC_STM32_L433XC/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/mcuconf.h
index 948c740f6e..948c740f6e 100644
--- a/platforms/chibios/GENERIC_STM32_L433XC/configs/mcuconf.h
+++ b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/mcuconf.h
diff --git a/platforms/chibios/IC_TEENSY_3_1/board/board.c b/platforms/chibios/boards/IC_TEENSY_3_1/board/board.c
index 36ae8051ee..424e0c975b 100644
--- a/platforms/chibios/IC_TEENSY_3_1/board/board.c
+++ b/platforms/chibios/boards/IC_TEENSY_3_1/board/board.c
@@ -144,3 +144,8 @@ void __early_init(void) {
  * @todo    Add your board-specific code, if any.
  */
 void boardInit(void) {}
+
+
+void restart_usb_driver(USBDriver *usbp) {
+    // Do nothing. Restarting the USB driver on these boards breaks it.
+}
diff --git a/platforms/chibios/IC_TEENSY_3_1/board/board.h b/platforms/chibios/boards/IC_TEENSY_3_1/board/board.h
index c8259ab0c7..c8259ab0c7 100644
--- a/platforms/chibios/IC_TEENSY_3_1/board/board.h
+++ b/platforms/chibios/boards/IC_TEENSY_3_1/board/board.h
diff --git a/platforms/chibios/IC_TEENSY_3_1/board/board.mk b/platforms/chibios/boards/IC_TEENSY_3_1/board/board.mk
index 842e335905..842e335905 100644
--- a/platforms/chibios/IC_TEENSY_3_1/board/board.mk
+++ b/platforms/chibios/boards/IC_TEENSY_3_1/board/board.mk
diff --git a/platforms/chibios/boards/IC_TEENSY_4_1/board/board.mk b/platforms/chibios/boards/IC_TEENSY_4_1/board/board.mk
new file mode 100644
index 0000000000..bc242ac3c5
--- /dev/null
+++ b/platforms/chibios/boards/IC_TEENSY_4_1/board/board.mk
@@ -0,0 +1 @@
+include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_4_1/board.mk
diff --git a/platforms/chibios/boards/IC_TEENSY_4_1/rules.mk b/platforms/chibios/boards/IC_TEENSY_4_1/rules.mk
new file mode 100644
index 0000000000..0c62d209c5
--- /dev/null
+++ b/platforms/chibios/boards/IC_TEENSY_4_1/rules.mk
@@ -0,0 +1 @@
+TEENSY_LOADER_CLI_MCU = imxrt1062
diff --git a/platforms/chibios/QMK_PROTON_C/board/board.mk b/platforms/chibios/boards/QMK_PROTON_C/board/board.mk
index f891e65247..f891e65247 100644
--- a/platforms/chibios/QMK_PROTON_C/board/board.mk
+++ b/platforms/chibios/boards/QMK_PROTON_C/board/board.mk
diff --git a/platforms/chibios/QMK_PROTON_C/configs/board.h b/platforms/chibios/boards/QMK_PROTON_C/configs/board.h
index 97159964d0..97159964d0 100644
--- a/platforms/chibios/QMK_PROTON_C/configs/board.h
+++ b/platforms/chibios/boards/QMK_PROTON_C/configs/board.h
diff --git a/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h b/platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h
index 3b0e9d20a6..3b0e9d20a6 100644
--- a/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h
+++ b/platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h
diff --git a/platforms/chibios/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h
index a1cbf68086..a1cbf68086 100644
--- a/platforms/chibios/QMK_PROTON_C/configs/chconf.h
+++ b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h
diff --git a/platforms/chibios/QMK_PROTON_C/configs/config.h b/platforms/chibios/boards/QMK_PROTON_C/configs/config.h
index a73f0c0b47..a73f0c0b47 100644
--- a/platforms/chibios/QMK_PROTON_C/configs/config.h
+++ b/platforms/chibios/boards/QMK_PROTON_C/configs/config.h
diff --git a/platforms/chibios/QMK_PROTON_C/configs/halconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h
index 41fbac29e0..d7a639a6d0 100644
--- a/platforms/chibios/QMK_PROTON_C/configs/halconf.h
+++ b/platforms/chibios/boards/QMK_PROTON_C/configs/halconf.h
@@ -412,7 +412,7 @@
  *          buffers.
  */
 #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE                 16
+#define SERIAL_BUFFERS_SIZE                 128
 #endif
 
 /*===========================================================================*/
diff --git a/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h
index 4d7b586c08..4d7b586c08 100644
--- a/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h
+++ b/platforms/chibios/boards/QMK_PROTON_C/configs/mcuconf.h
diff --git a/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk b/platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk
index 0618154678..0618154678 100644
--- a/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk
+++ b/platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk
diff --git a/platforms/chibios/STM32_F103_STM32DUINO/board/board.c b/platforms/chibios/boards/STM32_F103_STM32DUINO/board/board.c
index 8a34e81f25..8a34e81f25 100644
--- a/platforms/chibios/STM32_F103_STM32DUINO/board/board.c
+++ b/platforms/chibios/boards/STM32_F103_STM32DUINO/board/board.c
diff --git a/platforms/chibios/STM32_F103_STM32DUINO/board/board.h b/platforms/chibios/boards/STM32_F103_STM32DUINO/board/board.h
index 09d182d6ca..09d182d6ca 100644
--- a/platforms/chibios/STM32_F103_STM32DUINO/board/board.h
+++ b/platforms/chibios/boards/STM32_F103_STM32DUINO/board/board.h
diff --git a/platforms/chibios/STM32_F103_STM32DUINO/board/board.mk b/platforms/chibios/boards/STM32_F103_STM32DUINO/board/board.mk
index 842e335905..842e335905 100644
--- a/platforms/chibios/STM32_F103_STM32DUINO/board/board.mk
+++ b/platforms/chibios/boards/STM32_F103_STM32DUINO/board/board.mk
diff --git a/platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h b/platforms/chibios/boards/STM32_F103_STM32DUINO/configs/mcuconf.h
index 9945e7408d..9945e7408d 100644
--- a/platforms/chibios/STM32_F103_STM32DUINO/configs/mcuconf.h
+++ b/platforms/chibios/boards/STM32_F103_STM32DUINO/configs/mcuconf.h
diff --git a/platforms/chibios/boards/STM32_F103_STM32DUINO/ld/STM32F103x8_stm32duino_bootloader.ld b/platforms/chibios/boards/STM32_F103_STM32DUINO/ld/STM32F103x8_stm32duino_bootloader.ld
new file mode 100644
index 0000000000..a4bd566b59
--- /dev/null
+++ b/platforms/chibios/boards/STM32_F103_STM32DUINO/ld/STM32F103x8_stm32duino_bootloader.ld
@@ -0,0 +1,22 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * STM32F103x8 memory setup for use with the STM32Duino bootloader.
+ */
+f103_flash_size = 64k;
+
+INCLUDE stm32duino_bootloader_common.ld
diff --git a/platforms/chibios/boards/STM32_F103_STM32DUINO/ld/STM32F103xB_stm32duino_bootloader.ld b/platforms/chibios/boards/STM32_F103_STM32DUINO/ld/STM32F103xB_stm32duino_bootloader.ld
new file mode 100644
index 0000000000..dc47400dc5
--- /dev/null
+++ b/platforms/chibios/boards/STM32_F103_STM32DUINO/ld/STM32F103xB_stm32duino_bootloader.ld
@@ -0,0 +1,22 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * STM32F103xB memory setup for use with the STM32Duino bootloader.
+ */
+f103_flash_size = 128k;
+
+INCLUDE stm32duino_bootloader_common.ld
diff --git a/platforms/chibios/common/ld/STM32F103x8_stm32duino_bootloader.ld b/platforms/chibios/boards/STM32_F103_STM32DUINO/ld/stm32duino_bootloader_common.ld
index bb852422a3..76cd3153be 100644
--- a/platforms/chibios/common/ld/STM32F103x8_stm32duino_bootloader.ld
+++ b/platforms/chibios/boards/STM32_F103_STM32DUINO/ld/stm32duino_bootloader_common.ld
@@ -15,11 +15,11 @@
 */
 
 /*
- * ST32F103xB memory setup for use with the maplemini bootloader.
+ * STM32Duino bootloader common memory setup.
  */
 MEMORY
 {
-    flash0  : org = 0x08002000, len = 64k - 0x2000
+    flash0  : org = 0x08002000, len = f103_flash_size - 0x2000
     flash1  : org = 0x00000000, len = 0
     flash2  : org = 0x00000000, len = 0
     flash3  : org = 0x00000000, len = 0
diff --git a/platforms/chibios/common/configs/chconf.h b/platforms/chibios/boards/common/configs/chconf.h
index 44327a82d7..44327a82d7 100644
--- a/platforms/chibios/common/configs/chconf.h
+++ b/platforms/chibios/boards/common/configs/chconf.h
diff --git a/platforms/chibios/common/configs/halconf.h b/platforms/chibios/boards/common/configs/halconf.h
index 264ae4e6c1..c80f67ee27 100644
--- a/platforms/chibios/common/configs/halconf.h
+++ b/platforms/chibios/boards/common/configs/halconf.h
@@ -412,7 +412,7 @@
  *          buffers.
  */
 #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE                 16
+#define SERIAL_BUFFERS_SIZE                 128
 #endif
 
 /*===========================================================================*/
diff --git a/platforms/chibios/common/ld/MKL26Z64.ld b/platforms/chibios/boards/common/ld/MKL26Z64.ld
index c4ca8b874c..c4ca8b874c 100644
--- a/platforms/chibios/common/ld/MKL26Z64.ld
+++ b/platforms/chibios/boards/common/ld/MKL26Z64.ld
diff --git a/platforms/chibios/boards/common/ld/STM32L412xB.ld b/platforms/chibios/boards/common/ld/STM32L412xB.ld
new file mode 100644
index 0000000000..5718d6bc71
--- /dev/null
+++ b/platforms/chibios/boards/common/ld/STM32L412xB.ld
@@ -0,0 +1,85 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * STM32L412xB memory setup.
+ */
+MEMORY
+{
+    flash0  : org = 0x08000000, len = 128k
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 32k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld
diff --git a/platforms/chibios/keyboard-config-templates/board.h b/platforms/chibios/boards/keyboard-config-templates/board.h
index 5b840c389c..5b840c389c 100644
--- a/platforms/chibios/keyboard-config-templates/board.h
+++ b/platforms/chibios/boards/keyboard-config-templates/board.h
diff --git a/platforms/chibios/keyboard-config-templates/chconf.h b/platforms/chibios/boards/keyboard-config-templates/chconf.h
index fca444747c..fca444747c 100644
--- a/platforms/chibios/keyboard-config-templates/chconf.h
+++ b/platforms/chibios/boards/keyboard-config-templates/chconf.h
diff --git a/platforms/chibios/keyboard-config-templates/halconf.h b/platforms/chibios/boards/keyboard-config-templates/halconf.h
index 456020f16a..456020f16a 100644
--- a/platforms/chibios/keyboard-config-templates/halconf.h
+++ b/platforms/chibios/boards/keyboard-config-templates/halconf.h
diff --git a/platforms/chibios/keyboard-config-templates/mcuconf.h b/platforms/chibios/boards/keyboard-config-templates/mcuconf.h
index c690b02f4b..c690b02f4b 100644
--- a/platforms/chibios/keyboard-config-templates/mcuconf.h
+++ b/platforms/chibios/boards/keyboard-config-templates/mcuconf.h
diff --git a/platforms/chibios/drivers/analog.c b/platforms/chibios/drivers/analog.c
new file mode 100644
index 0000000000..8c476fcac2
--- /dev/null
+++ b/platforms/chibios/drivers/analog.c
@@ -0,0 +1,321 @@
+/* Copyright 2019 Drew Mills
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "quantum.h"
+#include "analog.h"
+#include <ch.h>
+#include <hal.h>
+
+#if !HAL_USE_ADC
+#    error "You need to set HAL_USE_ADC to TRUE in your halconf.h to use the ADC."
+#endif
+
+#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4
+#    error "You need to set one of the 'STM32_ADC_USE_ADCx' settings to TRUE in your mcuconf.h to use the ADC."
+#endif
+
+#if STM32_ADC_DUAL_MODE
+#    error "STM32 ADC Dual Mode is not supported at this time."
+#endif
+
+#if STM32_ADCV3_OVERSAMPLING
+#    error "STM32 ADCV3 Oversampling is not supported at this time."
+#endif
+
+// Otherwise assume V3
+#if defined(STM32F0XX) || defined(STM32L0XX)
+#    define USE_ADCV1
+#elif defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX)
+#    define USE_ADCV2
+#endif
+
+// BODGE to make v2 look like v1,3 and 4
+#ifdef USE_ADCV2
+#    if !defined(ADC_SMPR_SMP_1P5) && defined(ADC_SAMPLE_3)
+#        define ADC_SMPR_SMP_1P5 ADC_SAMPLE_3
+#        define ADC_SMPR_SMP_7P5 ADC_SAMPLE_15
+#        define ADC_SMPR_SMP_13P5 ADC_SAMPLE_28
+#        define ADC_SMPR_SMP_28P5 ADC_SAMPLE_56
+#        define ADC_SMPR_SMP_41P5 ADC_SAMPLE_84
+#        define ADC_SMPR_SMP_55P5 ADC_SAMPLE_112
+#        define ADC_SMPR_SMP_71P5 ADC_SAMPLE_144
+#        define ADC_SMPR_SMP_239P5 ADC_SAMPLE_480
+#    endif
+
+#    if !defined(ADC_SMPR_SMP_1P5) && defined(ADC_SAMPLE_1P5)
+#        define ADC_SMPR_SMP_1P5 ADC_SAMPLE_1P5
+#        define ADC_SMPR_SMP_7P5 ADC_SAMPLE_7P5
+#        define ADC_SMPR_SMP_13P5 ADC_SAMPLE_13P5
+#        define ADC_SMPR_SMP_28P5 ADC_SAMPLE_28P5
+#        define ADC_SMPR_SMP_41P5 ADC_SAMPLE_41P5
+#        define ADC_SMPR_SMP_55P5 ADC_SAMPLE_55P5
+#        define ADC_SMPR_SMP_71P5 ADC_SAMPLE_71P5
+#        define ADC_SMPR_SMP_239P5 ADC_SAMPLE_239P5
+#    endif
+
+// we still sample at 12bit, but scale down to the requested bit range
+#    define ADC_CFGR1_RES_12BIT 12
+#    define ADC_CFGR1_RES_10BIT 10
+#    define ADC_CFGR1_RES_8BIT 8
+#    define ADC_CFGR1_RES_6BIT 6
+#endif
+
+/* User configurable ADC options */
+#ifndef ADC_COUNT
+#    if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F4XX)
+#        define ADC_COUNT 1
+#    elif defined(STM32F3XX)
+#        define ADC_COUNT 4
+#    else
+#        error "ADC_COUNT has not been set for this ARM microcontroller."
+#    endif
+#endif
+
+#ifndef ADC_NUM_CHANNELS
+#    define ADC_NUM_CHANNELS 1
+#elif ADC_NUM_CHANNELS != 1
+#    error "The ARM ADC implementation currently only supports reading one channel at a time."
+#endif
+
+#ifndef ADC_BUFFER_DEPTH
+#    define ADC_BUFFER_DEPTH 1
+#endif
+
+// For more sampling rate options, look at hal_adc_lld.h in ChibiOS
+#ifndef ADC_SAMPLING_RATE
+#    define ADC_SAMPLING_RATE ADC_SMPR_SMP_1P5
+#endif
+
+// Options are 12, 10, 8, and 6 bit.
+#ifndef ADC_RESOLUTION
+#    ifdef ADC_CFGR_RES_10BITS  // ADCv3, ADCv4
+#        define ADC_RESOLUTION ADC_CFGR_RES_10BITS
+#    else  // ADCv1, ADCv5, or the bodge for ADCv2 above
+#        define ADC_RESOLUTION ADC_CFGR1_RES_10BIT
+#    endif
+#endif
+
+static ADCConfig   adcCfg = {};
+static adcsample_t sampleBuffer[ADC_NUM_CHANNELS * ADC_BUFFER_DEPTH];
+
+// Initialize to max number of ADCs, set to empty object to initialize all to false.
+static bool adcInitialized[ADC_COUNT] = {};
+
+// TODO: add back TR handling???
+static ADCConversionGroup adcConversionGroup = {
+    .circular     = FALSE,
+    .num_channels = (uint16_t)(ADC_NUM_CHANNELS),
+#if defined(USE_ADCV1)
+    .cfgr1 = ADC_CFGR1_CONT | ADC_RESOLUTION,
+    .smpr  = ADC_SAMPLING_RATE,
+#elif defined(USE_ADCV2)
+#    if !defined(STM32F1XX)
+    .cr2 = ADC_CR2_SWSTART,  // F103 seem very unhappy with, F401 seems very unhappy without...
+#    endif
+    .smpr2 = ADC_SMPR2_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN9(ADC_SAMPLING_RATE),
+    .smpr1 = ADC_SMPR1_SMP_AN10(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN11(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN12(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN13(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN14(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN15(ADC_SAMPLING_RATE),
+#else
+    .cfgr = ADC_CFGR_CONT | ADC_RESOLUTION,
+    .smpr = {ADC_SMPR1_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN9(ADC_SAMPLING_RATE), ADC_SMPR2_SMP_AN10(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN11(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN12(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN13(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN14(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN15(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN16(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN17(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN18(ADC_SAMPLING_RATE)},
+#endif
+};
+
+// clang-format off
+__attribute__((weak)) adc_mux pinToMux(pin_t pin) {
+    switch (pin) {
+#if defined(STM32F0XX)
+        case A0:  return TO_MUX( ADC_CHSELR_CHSEL0,  0 );
+        case A1:  return TO_MUX( ADC_CHSELR_CHSEL1,  0 );
+        case A2:  return TO_MUX( ADC_CHSELR_CHSEL2,  0 );
+        case A3:  return TO_MUX( ADC_CHSELR_CHSEL3,  0 );
+        case A4:  return TO_MUX( ADC_CHSELR_CHSEL4,  0 );
+        case A5:  return TO_MUX( ADC_CHSELR_CHSEL5,  0 );
+        case A6:  return TO_MUX( ADC_CHSELR_CHSEL6,  0 );
+        case A7:  return TO_MUX( ADC_CHSELR_CHSEL7,  0 );
+        case B0:  return TO_MUX( ADC_CHSELR_CHSEL8,  0 );
+        case B1:  return TO_MUX( ADC_CHSELR_CHSEL9,  0 );
+        case C0:  return TO_MUX( ADC_CHSELR_CHSEL10, 0 );
+        case C1:  return TO_MUX( ADC_CHSELR_CHSEL11, 0 );
+        case C2:  return TO_MUX( ADC_CHSELR_CHSEL12, 0 );
+        case C3:  return TO_MUX( ADC_CHSELR_CHSEL13, 0 );
+        case C4:  return TO_MUX( ADC_CHSELR_CHSEL14, 0 );
+        case C5:  return TO_MUX( ADC_CHSELR_CHSEL15, 0 );
+#elif defined(STM32F3XX)
+        case A0:  return TO_MUX( ADC_CHANNEL_IN1,  0 );
+        case A1:  return TO_MUX( ADC_CHANNEL_IN2,  0 );
+        case A2:  return TO_MUX( ADC_CHANNEL_IN3,  0 );
+        case A3:  return TO_MUX( ADC_CHANNEL_IN4,  0 );
+        case A4:  return TO_MUX( ADC_CHANNEL_IN1,  1 );
+        case A5:  return TO_MUX( ADC_CHANNEL_IN2,  1 );
+        case A6:  return TO_MUX( ADC_CHANNEL_IN3,  1 );
+        case A7:  return TO_MUX( ADC_CHANNEL_IN4,  1 );
+        case B0:  return TO_MUX( ADC_CHANNEL_IN12, 2 );
+        case B1:  return TO_MUX( ADC_CHANNEL_IN1,  2 );
+        case B2:  return TO_MUX( ADC_CHANNEL_IN12, 1 );
+        case B12: return TO_MUX( ADC_CHANNEL_IN3,  3 );
+        case B13: return TO_MUX( ADC_CHANNEL_IN5,  2 );
+        case B14: return TO_MUX( ADC_CHANNEL_IN4,  3 );
+        case B15: return TO_MUX( ADC_CHANNEL_IN5,  3 );
+        case C0:  return TO_MUX( ADC_CHANNEL_IN6,  0 ); // Can also be ADC2
+        case C1:  return TO_MUX( ADC_CHANNEL_IN7,  0 ); // Can also be ADC2
+        case C2:  return TO_MUX( ADC_CHANNEL_IN8,  0 ); // Can also be ADC2
+        case C3:  return TO_MUX( ADC_CHANNEL_IN9,  0 ); // Can also be ADC2
+        case C4:  return TO_MUX( ADC_CHANNEL_IN5,  1 );
+        case C5:  return TO_MUX( ADC_CHANNEL_IN11, 1 );
+        case D8:  return TO_MUX( ADC_CHANNEL_IN12, 3 );
+        case D9:  return TO_MUX( ADC_CHANNEL_IN13, 3 );
+        case D10: return TO_MUX( ADC_CHANNEL_IN7,  2 ); // Can also be ADC4
+        case D11: return TO_MUX( ADC_CHANNEL_IN8,  2 ); // Can also be ADC4
+        case D12: return TO_MUX( ADC_CHANNEL_IN9,  2 ); // Can also be ADC4
+        case D13: return TO_MUX( ADC_CHANNEL_IN10, 2 ); // Can also be ADC4
+        case D14: return TO_MUX( ADC_CHANNEL_IN11, 2 ); // Can also be ADC4
+        case E7:  return TO_MUX( ADC_CHANNEL_IN13, 2 );
+        case E8:  return TO_MUX( ADC_CHANNEL_IN6,  2 ); // Can also be ADC4
+        case E9:  return TO_MUX( ADC_CHANNEL_IN2,  2 );
+        case E10: return TO_MUX( ADC_CHANNEL_IN14, 2 );
+        case E11: return TO_MUX( ADC_CHANNEL_IN15, 2 );
+        case E12: return TO_MUX( ADC_CHANNEL_IN16, 2 );
+        case E13: return TO_MUX( ADC_CHANNEL_IN3,  2 );
+        case E14: return TO_MUX( ADC_CHANNEL_IN1,  3 );
+        case E15: return TO_MUX( ADC_CHANNEL_IN2,  3 );
+        case F2:  return TO_MUX( ADC_CHANNEL_IN10, 0 ); // Can also be ADC2
+        case F4:  return TO_MUX( ADC_CHANNEL_IN5,  0 );
+#elif defined(STM32F4XX)
+        case A0:  return TO_MUX( ADC_CHANNEL_IN0,  0 );
+        case A1:  return TO_MUX( ADC_CHANNEL_IN1,  0 );
+        case A2:  return TO_MUX( ADC_CHANNEL_IN2,  0 );
+        case A3:  return TO_MUX( ADC_CHANNEL_IN3,  0 );
+        case A4:  return TO_MUX( ADC_CHANNEL_IN4,  0 );
+        case A5:  return TO_MUX( ADC_CHANNEL_IN5,  0 );
+        case A6:  return TO_MUX( ADC_CHANNEL_IN6,  0 );
+        case A7:  return TO_MUX( ADC_CHANNEL_IN7,  0 );
+        case B0:  return TO_MUX( ADC_CHANNEL_IN8,  0 );
+        case B1:  return TO_MUX( ADC_CHANNEL_IN9,  0 );
+        case C0:  return TO_MUX( ADC_CHANNEL_IN10, 0 );
+        case C1:  return TO_MUX( ADC_CHANNEL_IN11, 0 );
+        case C2:  return TO_MUX( ADC_CHANNEL_IN12, 0 );
+        case C3:  return TO_MUX( ADC_CHANNEL_IN13, 0 );
+        case C4:  return TO_MUX( ADC_CHANNEL_IN14, 0 );
+        case C5:  return TO_MUX( ADC_CHANNEL_IN15, 0 );
+#    if STM32_ADC_USE_ADC3
+        case F3:  return TO_MUX( ADC_CHANNEL_IN9,  2 );
+        case F4:  return TO_MUX( ADC_CHANNEL_IN14, 2 );
+        case F5:  return TO_MUX( ADC_CHANNEL_IN15, 2 );
+        case F6:  return TO_MUX( ADC_CHANNEL_IN4,  2 );
+        case F7:  return TO_MUX( ADC_CHANNEL_IN5,  2 );
+        case F8:  return TO_MUX( ADC_CHANNEL_IN6,  2 );
+        case F9:  return TO_MUX( ADC_CHANNEL_IN7,  2 );
+        case F10: return TO_MUX( ADC_CHANNEL_IN8,  2 );
+#    endif
+#elif defined(STM32F1XX)
+        case A0:  return TO_MUX( ADC_CHANNEL_IN0,  0 );
+        case A1:  return TO_MUX( ADC_CHANNEL_IN1,  0 );
+        case A2:  return TO_MUX( ADC_CHANNEL_IN2,  0 );
+        case A3:  return TO_MUX( ADC_CHANNEL_IN3,  0 );
+        case A4:  return TO_MUX( ADC_CHANNEL_IN4,  0 );
+        case A5:  return TO_MUX( ADC_CHANNEL_IN5,  0 );
+        case A6:  return TO_MUX( ADC_CHANNEL_IN6,  0 );
+        case A7:  return TO_MUX( ADC_CHANNEL_IN7,  0 );
+        case B0:  return TO_MUX( ADC_CHANNEL_IN8,  0 );
+        case B1:  return TO_MUX( ADC_CHANNEL_IN9,  0 );
+        case C0:  return TO_MUX( ADC_CHANNEL_IN10, 0 );
+        case C1:  return TO_MUX( ADC_CHANNEL_IN11, 0 );
+        case C2:  return TO_MUX( ADC_CHANNEL_IN12, 0 );
+        case C3:  return TO_MUX( ADC_CHANNEL_IN13, 0 );
+        case C4:  return TO_MUX( ADC_CHANNEL_IN14, 0 );
+        case C5:  return TO_MUX( ADC_CHANNEL_IN15, 0 );
+        // STM32F103x[C-G] in 144-pin packages also have analog inputs on F6...F10, but they are on ADC3, and the
+        // ChibiOS ADC driver for STM32F1xx currently supports only ADC1, therefore these pins are not usable.
+#endif
+    }
+
+    // return an adc that would never be used so intToADCDriver will bail out
+    return TO_MUX(0, 0xFF);
+}
+// clang-format on
+
+static inline ADCDriver* intToADCDriver(uint8_t adcInt) {
+    switch (adcInt) {
+#if STM32_ADC_USE_ADC1
+        case 0:
+            return &ADCD1;
+#endif
+#if STM32_ADC_USE_ADC2
+        case 1:
+            return &ADCD2;
+#endif
+#if STM32_ADC_USE_ADC3
+        case 2:
+            return &ADCD3;
+#endif
+#if STM32_ADC_USE_ADC4
+        case 3:
+            return &ADCD4;
+#endif
+    }
+
+    return NULL;
+}
+
+static inline void manageAdcInitializationDriver(uint8_t adc, ADCDriver* adcDriver) {
+    if (!adcInitialized[adc]) {
+        adcStart(adcDriver, &adcCfg);
+        adcInitialized[adc] = true;
+    }
+}
+
+int16_t analogReadPin(pin_t pin) {
+    palSetLineMode(pin, PAL_MODE_INPUT_ANALOG);
+
+    return adc_read(pinToMux(pin));
+}
+
+int16_t analogReadPinAdc(pin_t pin, uint8_t adc) {
+    palSetLineMode(pin, PAL_MODE_INPUT_ANALOG);
+
+    adc_mux target = pinToMux(pin);
+    target.adc     = adc;
+    return adc_read(target);
+}
+
+int16_t adc_read(adc_mux mux) {
+#if defined(USE_ADCV1)
+    // TODO: fix previous assumption of only 1 input...
+    adcConversionGroup.chselr = 1 << mux.input; /*no macro to convert N to ADC_CHSELR_CHSEL1*/
+#elif defined(USE_ADCV2)
+    adcConversionGroup.sqr3 = ADC_SQR3_SQ1_N(mux.input);
+#else
+    adcConversionGroup.sqr[0] = ADC_SQR1_SQ1_N(mux.input);
+#endif
+
+    ADCDriver* targetDriver = intToADCDriver(mux.adc);
+    if (!targetDriver) {
+        return 0;
+    }
+
+    manageAdcInitializationDriver(mux.adc, targetDriver);
+    if (adcConvert(targetDriver, &adcConversionGroup, &sampleBuffer[0], ADC_BUFFER_DEPTH) != MSG_OK) {
+        return 0;
+    }
+
+#ifdef USE_ADCV2
+    // fake 12-bit -> N-bit scale
+    return (*sampleBuffer) >> (12 - ADC_RESOLUTION);
+#else
+    // already handled as part of adcConvert
+    return *sampleBuffer;
+#endif
+}
diff --git a/platforms/chibios/drivers/analog.h b/platforms/chibios/drivers/analog.h
new file mode 100644
index 0000000000..e61c394265
--- /dev/null
+++ b/platforms/chibios/drivers/analog.h
@@ -0,0 +1,41 @@
+/* Copyright 2019 Drew Mills
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include "quantum.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+    uint16_t input;
+    uint8_t  adc;
+} adc_mux;
+#define TO_MUX(i, a) \
+    (adc_mux) { i, a }
+
+int16_t analogReadPin(pin_t pin);
+int16_t analogReadPinAdc(pin_t pin, uint8_t adc);
+adc_mux pinToMux(pin_t pin);
+
+int16_t adc_read(adc_mux mux);
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/platforms/chibios/drivers/eeprom/eeprom_stm32_L0_L1.c b/platforms/chibios/drivers/eeprom/eeprom_stm32_L0_L1.c
new file mode 100644
index 0000000000..ed26cc7145
--- /dev/null
+++ b/platforms/chibios/drivers/eeprom/eeprom_stm32_L0_L1.c
@@ -0,0 +1,96 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+#include <hal.h>
+#include "eeprom_driver.h"
+#include "eeprom_stm32_L0_L1.h"
+
+#define EEPROM_BASE_ADDR 0x08080000
+#define EEPROM_ADDR(offset) (EEPROM_BASE_ADDR + (offset))
+#define EEPROM_PTR(offset) ((__IO uint8_t *)EEPROM_ADDR(offset))
+#define EEPROM_BYTE(location, offset) (*(EEPROM_PTR(((uint32_t)location) + ((uint32_t)offset))))
+
+#define BUFFER_BYTE(buffer, offset) (*(((uint8_t *)buffer) + offset))
+
+#define FLASH_PEKEY1 0x89ABCDEF
+#define FLASH_PEKEY2 0x02030405
+
+static inline void STM32_L0_L1_EEPROM_WaitNotBusy(void) {
+    while (FLASH->SR & FLASH_SR_BSY) {
+        __WFI();
+    }
+}
+
+static inline void STM32_L0_L1_EEPROM_Unlock(void) {
+    STM32_L0_L1_EEPROM_WaitNotBusy();
+    if (FLASH->PECR & FLASH_PECR_PELOCK) {
+        FLASH->PEKEYR = FLASH_PEKEY1;
+        FLASH->PEKEYR = FLASH_PEKEY2;
+    }
+}
+
+static inline void STM32_L0_L1_EEPROM_Lock(void) {
+    STM32_L0_L1_EEPROM_WaitNotBusy();
+    FLASH->PECR |= FLASH_PECR_PELOCK;
+}
+
+void eeprom_driver_init(void) {}
+
+void eeprom_driver_erase(void) {
+    STM32_L0_L1_EEPROM_Unlock();
+
+    for (size_t offset = 0; offset < STM32_ONBOARD_EEPROM_SIZE; offset += sizeof(uint32_t)) {
+        FLASH->PECR |= FLASH_PECR_ERASE | FLASH_PECR_DATA;
+
+        *(__IO uint32_t *)EEPROM_ADDR(offset) = (uint32_t)0;
+
+        STM32_L0_L1_EEPROM_WaitNotBusy();
+        FLASH->PECR &= ~(FLASH_PECR_ERASE | FLASH_PECR_DATA);
+    }
+
+    STM32_L0_L1_EEPROM_Lock();
+}
+
+void eeprom_read_block(void *buf, const void *addr, size_t len) {
+    for (size_t offset = 0; offset < len; ++offset) {
+        // Drop out if we've hit the limit of the EEPROM
+        if ((((uint32_t)addr) + offset) >= STM32_ONBOARD_EEPROM_SIZE) {
+            break;
+        }
+
+        STM32_L0_L1_EEPROM_WaitNotBusy();
+        BUFFER_BYTE(buf, offset) = EEPROM_BYTE(addr, offset);
+    }
+}
+
+void eeprom_write_block(const void *buf, void *addr, size_t len) {
+    STM32_L0_L1_EEPROM_Unlock();
+
+    for (size_t offset = 0; offset < len; ++offset) {
+        // Drop out if we've hit the limit of the EEPROM
+        if ((((uint32_t)addr) + offset) >= STM32_ONBOARD_EEPROM_SIZE) {
+            break;
+        }
+
+        STM32_L0_L1_EEPROM_WaitNotBusy();
+        EEPROM_BYTE(addr, offset) = BUFFER_BYTE(buf, offset);
+    }
+
+    STM32_L0_L1_EEPROM_Lock();
+}
diff --git a/platforms/chibios/drivers/eeprom/eeprom_stm32_L0_L1.h b/platforms/chibios/drivers/eeprom/eeprom_stm32_L0_L1.h
new file mode 100644
index 0000000000..a35defca8b
--- /dev/null
+++ b/platforms/chibios/drivers/eeprom/eeprom_stm32_L0_L1.h
@@ -0,0 +1,33 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/*
+    The size used by the STM32 L0/L1 EEPROM driver.
+*/
+#ifndef STM32_ONBOARD_EEPROM_SIZE
+#    ifdef VIA_ENABLE
+#        define STM32_ONBOARD_EEPROM_SIZE 1024
+#    else
+#        include "eeconfig.h"
+#        define STM32_ONBOARD_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4)  // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO and EEPROM page sizing
+#    endif
+#endif
+
+#if STM32_ONBOARD_EEPROM_SIZE > 128
+#    pragma message("Please note: resetting EEPROM using an STM32L0/L1 device takes up to 1 second for every 1kB of internal EEPROM used.")
+#endif
diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c
new file mode 100644
index 0000000000..fc4bb2ab37
--- /dev/null
+++ b/platforms/chibios/drivers/i2c_master.c
@@ -0,0 +1,121 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library is only valid for STM32 processors.
+ * This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
+ * but using any other I2C pins should be trivial.
+ */
+#include "quantum.h"
+#include "i2c_master.h"
+#include <string.h>
+#include <hal.h>
+
+static uint8_t i2c_address;
+
+static const I2CConfig i2cconfig = {
+#if defined(USE_I2CV1_CONTRIB)
+    I2C1_CLOCK_SPEED,
+#elif defined(USE_I2CV1)
+    I2C1_OPMODE,
+    I2C1_CLOCK_SPEED,
+    I2C1_DUTY_CYCLE,
+#else
+    // This configures the I2C clock to 400khz assuming a 72Mhz clock
+    // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+    STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
+#endif
+};
+
+static i2c_status_t chibios_to_qmk(const msg_t* status) {
+    switch (*status) {
+        case I2C_NO_ERROR:
+            return I2C_STATUS_SUCCESS;
+        case I2C_TIMEOUT:
+            return I2C_STATUS_TIMEOUT;
+        // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
+        default:
+            return I2C_STATUS_ERROR;
+    }
+}
+
+__attribute__((weak)) void i2c_init(void) {
+    static bool is_initialised = false;
+    if (!is_initialised) {
+        is_initialised = true;
+
+        // Try releasing special pins for a short time
+        palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
+        palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
+
+        chThdSleepMilliseconds(10);
+#if defined(USE_GPIOV1)
+        palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, I2C1_SCL_PAL_MODE);
+        palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, I2C1_SDA_PAL_MODE);
+#else
+        palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+        palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+#endif
+    }
+}
+
+i2c_status_t i2c_start(uint8_t address) {
+    i2c_address = address;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    return I2C_STATUS_SUCCESS;
+}
+
+i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = address;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = address;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = devaddr;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+
+    uint8_t complete_packet[length + 1];
+    for (uint8_t i = 0; i < length; i++) {
+        complete_packet[i + 1] = data[i];
+    }
+    complete_packet[0] = regaddr;
+
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = devaddr;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), &regaddr, 1, data, length, TIME_MS2I(timeout));
+    return chibios_to_qmk(&status);
+}
+
+void i2c_stop(void) { i2cStop(&I2C_DRIVER); }
diff --git a/platforms/chibios/drivers/i2c_master.h b/platforms/chibios/drivers/i2c_master.h
new file mode 100644
index 0000000000..c68109acbd
--- /dev/null
+++ b/platforms/chibios/drivers/i2c_master.h
@@ -0,0 +1,113 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ */
+#pragma once
+
+#include <ch.h>
+#include <hal.h>
+
+#ifdef I2C1_BANK
+#    define I2C1_SCL_BANK I2C1_BANK
+#    define I2C1_SDA_BANK I2C1_BANK
+#endif
+
+#ifndef I2C1_SCL_BANK
+#    define I2C1_SCL_BANK GPIOB
+#endif
+
+#ifndef I2C1_SDA_BANK
+#    define I2C1_SDA_BANK GPIOB
+#endif
+
+#ifndef I2C1_SCL
+#    define I2C1_SCL 6
+#endif
+#ifndef I2C1_SDA
+#    define I2C1_SDA 7
+#endif
+
+#ifdef USE_I2CV1
+#    ifndef I2C1_OPMODE
+#        define I2C1_OPMODE OPMODE_I2C
+#    endif
+#    ifndef I2C1_CLOCK_SPEED
+#        define I2C1_CLOCK_SPEED 100000 /* 400000 */
+#    endif
+#    ifndef I2C1_DUTY_CYCLE
+#        define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+#    endif
+#else
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+#    ifndef I2C1_TIMINGR_PRESC
+#        define I2C1_TIMINGR_PRESC 0U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLDEL
+#        define I2C1_TIMINGR_SCLDEL 7U
+#    endif
+#    ifndef I2C1_TIMINGR_SDADEL
+#        define I2C1_TIMINGR_SDADEL 0U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLH
+#        define I2C1_TIMINGR_SCLH 38U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLL
+#        define I2C1_TIMINGR_SCLL 129U
+#    endif
+#endif
+
+#ifndef I2C_DRIVER
+#    define I2C_DRIVER I2CD1
+#endif
+
+#ifdef USE_GPIOV1
+#    ifndef I2C1_SCL_PAL_MODE
+#        define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+#    endif
+#    ifndef I2C1_SDA_PAL_MODE
+#        define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+#    endif
+#else
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+#    ifndef I2C1_SCL_PAL_MODE
+#        define I2C1_SCL_PAL_MODE 4
+#    endif
+#    ifndef I2C1_SDA_PAL_MODE
+#        define I2C1_SDA_PAL_MODE 4
+#    endif
+#endif
+
+typedef int16_t i2c_status_t;
+
+#define I2C_STATUS_SUCCESS (0)
+#define I2C_STATUS_ERROR (-1)
+#define I2C_STATUS_TIMEOUT (-2)
+
+void         i2c_init(void);
+i2c_status_t i2c_start(uint8_t address);
+i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+void         i2c_stop(void);
diff --git a/platforms/chibios/drivers/serial.c b/platforms/chibios/drivers/serial.c
new file mode 100644
index 0000000000..f54fbcee4e
--- /dev/null
+++ b/platforms/chibios/drivers/serial.c
@@ -0,0 +1,278 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#include "quantum.h"
+#include "serial.h"
+#include "wait.h"
+
+#include <hal.h>
+
+// TODO: resolve/remove build warnings
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) && defined(PROTOCOL_CHIBIOS) && defined(WS2812_DRIVER_BITBANG)
+#    warning "RGBLED_SPLIT not supported with bitbang WS2812 driver"
+#endif
+
+// default wait implementation cannot be called within interrupt
+//   this method seems to be more accurate than GPT timers
+#if PORT_SUPPORTS_RT == FALSE
+#    error "chSysPolledDelayX method not supported on this platform"
+#else
+#    undef wait_us
+#    define wait_us(x) chSysPolledDelayX(US2RTC(STM32_SYSCLK, x))
+#endif
+
+#ifndef SELECT_SOFT_SERIAL_SPEED
+#    define SELECT_SOFT_SERIAL_SPEED 1
+// TODO: correct speeds...
+//  0: about 189kbps (Experimental only)
+//  1: about 137kbps (default)
+//  2: about 75kbps
+//  3: about 39kbps
+//  4: about 26kbps
+//  5: about 20kbps
+#endif
+
+// Serial pulse period in microseconds. At the moment, going lower than 12 causes communication failure
+#if SELECT_SOFT_SERIAL_SPEED == 0
+#    define SERIAL_DELAY 12
+#elif SELECT_SOFT_SERIAL_SPEED == 1
+#    define SERIAL_DELAY 16
+#elif SELECT_SOFT_SERIAL_SPEED == 2
+#    define SERIAL_DELAY 24
+#elif SELECT_SOFT_SERIAL_SPEED == 3
+#    define SERIAL_DELAY 32
+#elif SELECT_SOFT_SERIAL_SPEED == 4
+#    define SERIAL_DELAY 48
+#elif SELECT_SOFT_SERIAL_SPEED == 5
+#    define SERIAL_DELAY 64
+#else
+#    error invalid SELECT_SOFT_SERIAL_SPEED value
+#endif
+
+inline static void serial_delay(void) { wait_us(SERIAL_DELAY); }
+inline static void serial_delay_half(void) { wait_us(SERIAL_DELAY / 2); }
+inline static void serial_delay_blip(void) { wait_us(1); }
+inline static void serial_output(void) { setPinOutput(SOFT_SERIAL_PIN); }
+inline static void serial_input(void) { setPinInputHigh(SOFT_SERIAL_PIN); }
+inline static bool serial_read_pin(void) { return !!readPin(SOFT_SERIAL_PIN); }
+inline static void serial_low(void) { writePinLow(SOFT_SERIAL_PIN); }
+inline static void serial_high(void) { writePinHigh(SOFT_SERIAL_PIN); }
+
+void interrupt_handler(void *arg);
+
+// Use thread + palWaitLineTimeout instead of palSetLineCallback
+//  - Methods like setPinOutput and palEnableLineEvent/palDisableLineEvent
+//    cause the interrupt to lock up, which would limit to only receiving data...
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+    (void)arg;
+    chRegSetThreadName("blinker");
+    while (true) {
+        palWaitLineTimeout(SOFT_SERIAL_PIN, TIME_INFINITE);
+        interrupt_handler(NULL);
+    }
+}
+
+void soft_serial_initiator_init(void) {
+    serial_output();
+    serial_high();
+}
+
+void soft_serial_target_init(void) {
+    serial_input();
+
+    palEnablePadEvent(PAL_PORT(SOFT_SERIAL_PIN), PAL_PAD(SOFT_SERIAL_PIN), PAL_EVENT_MODE_FALLING_EDGE);
+    chThdCreateStatic(waThread1, sizeof(waThread1), HIGHPRIO, Thread1, NULL);
+}
+
+// Used by the master to synchronize timing with the slave.
+static void __attribute__((noinline)) sync_recv(void) {
+    serial_input();
+    // This shouldn't hang if the slave disconnects because the
+    // serial line will float to high if the slave does disconnect.
+    while (!serial_read_pin()) {
+    }
+
+    serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static void __attribute__((noinline)) sync_send(void) {
+    serial_output();
+
+    serial_low();
+    serial_delay();
+
+    serial_high();
+}
+
+// Reads a byte from the serial line
+static uint8_t __attribute__((noinline)) serial_read_byte(void) {
+    uint8_t byte = 0;
+    serial_input();
+    for (uint8_t i = 0; i < 8; ++i) {
+        byte = (byte << 1) | serial_read_pin();
+        serial_delay();
+    }
+
+    return byte;
+}
+
+// Sends a byte with MSB ordering
+static void __attribute__((noinline)) serial_write_byte(uint8_t data) {
+    uint8_t b = 8;
+    serial_output();
+    while (b--) {
+        if (data & (1 << b)) {
+            serial_high();
+        } else {
+            serial_low();
+        }
+        serial_delay();
+    }
+}
+
+// interrupt handle to be used by the slave device
+void interrupt_handler(void *arg) {
+    chSysLockFromISR();
+
+    sync_send();
+
+    // read mid pulses
+    serial_delay_blip();
+
+    uint8_t checksum_computed = 0;
+    int     sstd_index        = 0;
+
+    sstd_index = serial_read_byte();
+    sync_send();
+
+    split_transaction_desc_t *trans = &split_transaction_table[sstd_index];
+    for (int i = 0; i < trans->initiator2target_buffer_size; ++i) {
+        split_trans_initiator2target_buffer(trans)[i] = serial_read_byte();
+        sync_send();
+        checksum_computed += split_trans_initiator2target_buffer(trans)[i];
+    }
+    checksum_computed ^= 7;
+    uint8_t checksum_received = serial_read_byte();
+    sync_send();
+
+    // wait for the sync to finish sending
+    serial_delay();
+
+    // Allow any slave processing to occur
+    if (trans->slave_callback) {
+        trans->slave_callback(trans->initiator2target_buffer_size, split_trans_initiator2target_buffer(trans), trans->target2initiator_buffer_size, split_trans_target2initiator_buffer(trans));
+    }
+
+    uint8_t checksum = 0;
+    for (int i = 0; i < trans->target2initiator_buffer_size; ++i) {
+        serial_write_byte(split_trans_target2initiator_buffer(trans)[i]);
+        sync_send();
+        serial_delay_half();
+        checksum += split_trans_target2initiator_buffer(trans)[i];
+    }
+    serial_write_byte(checksum ^ 7);
+    sync_send();
+
+    // wait for the sync to finish sending
+    serial_delay();
+
+    *trans->status = (checksum_computed == checksum_received) ? TRANSACTION_ACCEPTED : TRANSACTION_DATA_ERROR;
+
+    // end transaction
+    serial_input();
+
+    // TODO: remove extra delay between transactions
+    serial_delay();
+
+    chSysUnlockFromISR();
+}
+
+/////////
+//  start transaction by initiator
+//
+// int  soft_serial_transaction(int sstd_index)
+//
+// Returns:
+//    TRANSACTION_END
+//    TRANSACTION_NO_RESPONSE
+//    TRANSACTION_DATA_ERROR
+// this code is very time dependent, so we need to disable interrupts
+int soft_serial_transaction(int sstd_index) {
+    if (sstd_index > NUM_TOTAL_TRANSACTIONS) return TRANSACTION_TYPE_ERROR;
+    split_transaction_desc_t *trans = &split_transaction_table[sstd_index];
+    if (!trans->status) return TRANSACTION_TYPE_ERROR;  // not registered
+
+    // TODO: remove extra delay between transactions
+    serial_delay();
+
+    // this code is very time dependent, so we need to disable interrupts
+    chSysLock();
+
+    // signal to the slave that we want to start a transaction
+    serial_output();
+    serial_low();
+    serial_delay_blip();
+
+    // wait for the slaves response
+    serial_input();
+    serial_high();
+    serial_delay();
+
+    // check if the slave is present
+    if (serial_read_pin()) {
+        // slave failed to pull the line low, assume not present
+        dprintf("serial::NO_RESPONSE\n");
+        chSysUnlock();
+        return TRANSACTION_NO_RESPONSE;
+    }
+
+    // if the slave is present syncronize with it
+
+    uint8_t checksum = 0;
+    // send data to the slave
+    serial_write_byte(sstd_index);  // first chunk is transaction id
+    sync_recv();
+
+    for (int i = 0; i < trans->initiator2target_buffer_size; ++i) {
+        serial_write_byte(split_trans_initiator2target_buffer(trans)[i]);
+        sync_recv();
+        checksum += split_trans_initiator2target_buffer(trans)[i];
+    }
+    serial_write_byte(checksum ^ 7);
+    sync_recv();
+
+    serial_delay();
+    serial_delay();  // read mid pulses
+
+    // receive data from the slave
+    uint8_t checksum_computed = 0;
+    for (int i = 0; i < trans->target2initiator_buffer_size; ++i) {
+        split_trans_target2initiator_buffer(trans)[i] = serial_read_byte();
+        sync_recv();
+        checksum_computed += split_trans_target2initiator_buffer(trans)[i];
+    }
+    checksum_computed ^= 7;
+    uint8_t checksum_received = serial_read_byte();
+
+    sync_recv();
+    serial_delay();
+
+    if ((checksum_computed) != (checksum_received)) {
+        dprintf("serial::FAIL[%u,%u,%u]\n", checksum_computed, checksum_received, sstd_index);
+        serial_output();
+        serial_high();
+
+        chSysUnlock();
+        return TRANSACTION_DATA_ERROR;
+    }
+
+    // always, release the line when not in use
+    serial_high();
+    serial_output();
+
+    chSysUnlock();
+    return TRANSACTION_END;
+}
diff --git a/platforms/chibios/drivers/serial_usart.c b/platforms/chibios/drivers/serial_usart.c
new file mode 100644
index 0000000000..ea4473791c
--- /dev/null
+++ b/platforms/chibios/drivers/serial_usart.c
@@ -0,0 +1,318 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "serial_usart.h"
+
+#if defined(SERIAL_USART_CONFIG)
+static SerialConfig serial_config = SERIAL_USART_CONFIG;
+#else
+static SerialConfig serial_config = {
+    .speed = (SERIAL_USART_SPEED), /* speed - mandatory */
+    .cr1   = (SERIAL_USART_CR1),
+    .cr2   = (SERIAL_USART_CR2),
+#    if !defined(SERIAL_USART_FULL_DUPLEX)
+    .cr3   = ((SERIAL_USART_CR3) | USART_CR3_HDSEL) /* activate half-duplex mode */
+#    else
+    .cr3 = (SERIAL_USART_CR3)
+#    endif
+};
+#endif
+
+static SerialDriver* serial_driver = &SERIAL_USART_DRIVER;
+
+static inline bool react_to_transactions(void);
+static inline bool __attribute__((nonnull)) receive(uint8_t* destination, const size_t size);
+static inline bool __attribute__((nonnull)) send(const uint8_t* source, const size_t size);
+static inline int  initiate_transaction(uint8_t sstd_index);
+static inline void usart_clear(void);
+
+/**
+ * @brief Clear the receive input queue.
+ */
+static inline void usart_clear(void) {
+    osalSysLock();
+    bool volatile queue_not_empty = !iqIsEmptyI(&serial_driver->iqueue);
+    osalSysUnlock();
+
+    while (queue_not_empty) {
+        osalSysLock();
+        /* Hard reset the input queue. */
+        iqResetI(&serial_driver->iqueue);
+        osalSysUnlock();
+        /* Allow pending interrupts to preempt.
+         * Do not merge the lock/unlock blocks into one
+         * or the code will not work properly.
+         * The empty read adds a tiny amount of delay. */
+        (void)queue_not_empty;
+        osalSysLock();
+        queue_not_empty = !iqIsEmptyI(&serial_driver->iqueue);
+        osalSysUnlock();
+    }
+}
+
+/**
+ * @brief Blocking send of buffer with timeout.
+ *
+ * @return true Send success.
+ * @return false Send failed.
+ */
+static inline bool send(const uint8_t* source, const size_t size) {
+    bool success = (size_t)sdWriteTimeout(serial_driver, source, size, TIME_MS2I(SERIAL_USART_TIMEOUT)) == size;
+
+#if !defined(SERIAL_USART_FULL_DUPLEX)
+    if (success) {
+        /* Half duplex fills the input queue with the data we wrote - just throw it away.
+           Under the right circumstances (e.g. bad cables paired with high baud rates)
+           less bytes can be present in the input queue, therefore a timeout is needed. */
+        uint8_t dump[size];
+        return receive(dump, size);
+    }
+#endif
+
+    return success;
+}
+
+/**
+ * @brief  Blocking receive of size * bytes with timeout.
+ *
+ * @return true Receive success.
+ * @return false Receive failed.
+ */
+static inline bool receive(uint8_t* destination, const size_t size) {
+    bool success = (size_t)sdReadTimeout(serial_driver, destination, size, TIME_MS2I(SERIAL_USART_TIMEOUT)) == size;
+    return success;
+}
+
+#if !defined(SERIAL_USART_FULL_DUPLEX)
+
+/**
+ * @brief Initiate pins for USART peripheral. Half-duplex configuration.
+ */
+__attribute__((weak)) void usart_init(void) {
+#    if defined(MCU_STM32)
+#        if defined(USE_GPIOV1)
+    palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
+#        else
+    palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+#        endif
+
+#        if defined(USART_REMAP)
+    USART_REMAP;
+#        endif
+#    else
+#        pragma message "usart_init: MCU Familiy not supported by default, please supply your own init code by implementing usart_init() in your keyboard files."
+#    endif
+}
+
+#else
+
+/**
+ * @brief Initiate pins for USART peripheral. Full-duplex configuration.
+ */
+__attribute__((weak)) void usart_init(void) {
+#    if defined(MCU_STM32)
+#        if defined(USE_GPIOV1)
+    palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
+    palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_INPUT);
+#        else
+    palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
+    palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_RX_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
+#        endif
+
+#        if defined(USART_REMAP)
+    USART_REMAP;
+#        endif
+#    else
+#        pragma message "usart_init: MCU Familiy not supported by default, please supply your own init code by implementing usart_init() in your keyboard files."
+#    endif
+}
+
+#endif
+
+/**
+ * @brief Overridable master specific initializations.
+ */
+__attribute__((weak, nonnull)) void usart_master_init(SerialDriver** driver) {
+    (void)driver;
+    usart_init();
+}
+
+/**
+ * @brief Overridable slave specific initializations.
+ */
+__attribute__((weak, nonnull)) void usart_slave_init(SerialDriver** driver) {
+    (void)driver;
+    usart_init();
+}
+
+/**
+ * @brief This thread runs on the slave and responds to transactions initiated
+ * by the master.
+ */
+static THD_WORKING_AREA(waSlaveThread, 1024);
+static THD_FUNCTION(SlaveThread, arg) {
+    (void)arg;
+    chRegSetThreadName("usart_tx_rx");
+
+    while (true) {
+        if (!react_to_transactions()) {
+            /* Clear the receive queue, to start with a clean slate.
+             * Parts of failed transactions or spurious bytes could still be in it. */
+            usart_clear();
+        }
+    }
+}
+
+/**
+ * @brief Slave specific initializations.
+ */
+void soft_serial_target_init(void) {
+    usart_slave_init(&serial_driver);
+
+    sdStart(serial_driver, &serial_config);
+
+    /* Start transport thread. */
+    chThdCreateStatic(waSlaveThread, sizeof(waSlaveThread), HIGHPRIO, SlaveThread, NULL);
+}
+
+/**
+ * @brief React to transactions started by the master.
+ */
+static inline bool react_to_transactions(void) {
+    /* Wait until there is a transaction for us. */
+    uint8_t sstd_index = (uint8_t)sdGet(serial_driver);
+
+    /* Sanity check that we are actually responding to a valid transaction. */
+    if (sstd_index >= NUM_TOTAL_TRANSACTIONS) {
+        return false;
+    }
+
+    split_transaction_desc_t* trans = &split_transaction_table[sstd_index];
+
+    /* Send back the handshake which is XORed as a simple checksum,
+     to signal that the slave is ready to receive possible transaction buffers  */
+    sstd_index ^= HANDSHAKE_MAGIC;
+    if (!send(&sstd_index, sizeof(sstd_index))) {
+        *trans->status = TRANSACTION_DATA_ERROR;
+        return false;
+    }
+
+    /* Receive transaction buffer from the master. If this transaction requires it.*/
+    if (trans->initiator2target_buffer_size) {
+        if (!receive(split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) {
+            *trans->status = TRANSACTION_DATA_ERROR;
+            return false;
+        }
+    }
+
+    /* Allow any slave processing to occur. */
+    if (trans->slave_callback) {
+        trans->slave_callback(trans->initiator2target_buffer_size, split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size, split_trans_target2initiator_buffer(trans));
+    }
+
+    /* Send transaction buffer to the master. If this transaction requires it. */
+    if (trans->target2initiator_buffer_size) {
+        if (!send(split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) {
+            *trans->status = TRANSACTION_DATA_ERROR;
+            return false;
+        }
+    }
+
+    *trans->status = TRANSACTION_ACCEPTED;
+    return true;
+}
+
+/**
+ * @brief Master specific initializations.
+ */
+void soft_serial_initiator_init(void) {
+    usart_master_init(&serial_driver);
+
+#if defined(MCU_STM32) && defined(SERIAL_USART_PIN_SWAP)
+    serial_config.cr2 |= USART_CR2_SWAP;  // master has swapped TX/RX pins
+#endif
+
+    sdStart(serial_driver, &serial_config);
+}
+
+/**
+ * @brief Start transaction from the master half to the slave half.
+ *
+ * @param index Transaction Table index of the transaction to start.
+ * @return int TRANSACTION_NO_RESPONSE in case of Timeout.
+ *             TRANSACTION_TYPE_ERROR in case of invalid transaction index.
+ *             TRANSACTION_END in case of success.
+ */
+int soft_serial_transaction(int index) {
+    /* Clear the receive queue, to start with a clean slate.
+     * Parts of failed transactions or spurious bytes could still be in it. */
+    usart_clear();
+    return initiate_transaction((uint8_t)index);
+}
+
+/**
+ * @brief Initiate transaction to slave half.
+ */
+static inline int initiate_transaction(uint8_t sstd_index) {
+    /* Sanity check that we are actually starting a valid transaction. */
+    if (sstd_index >= NUM_TOTAL_TRANSACTIONS) {
+        dprintln("USART: Illegal transaction Id.");
+        return TRANSACTION_TYPE_ERROR;
+    }
+
+    split_transaction_desc_t* trans = &split_transaction_table[sstd_index];
+
+    /* Transaction is not registered. Abort. */
+    if (!trans->status) {
+        dprintln("USART: Transaction not registered.");
+        return TRANSACTION_TYPE_ERROR;
+    }
+
+    /* Send transaction table index to the slave, which doubles as basic handshake token. */
+    if (!send(&sstd_index, sizeof(sstd_index))) {
+        dprintln("USART: Send Handshake failed.");
+        return TRANSACTION_TYPE_ERROR;
+    }
+
+    uint8_t sstd_index_shake = 0xFF;
+
+    /* Which we always read back first so that we can error out correctly.
+     *   - due to the half duplex limitations on return codes, we always have to read *something*.
+     *   - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready.
+     */
+    if (!receive(&sstd_index_shake, sizeof(sstd_index_shake)) || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) {
+        dprintln("USART: Handshake failed.");
+        return TRANSACTION_NO_RESPONSE;
+    }
+
+    /* Send transaction buffer to the slave. If this transaction requires it. */
+    if (trans->initiator2target_buffer_size) {
+        if (!send(split_trans_initiator2target_buffer(trans), trans->initiator2target_buffer_size)) {
+            dprintln("USART: Send failed.");
+            return TRANSACTION_NO_RESPONSE;
+        }
+    }
+
+    /* Receive transaction buffer from the slave. If this transaction requires it. */
+    if (trans->target2initiator_buffer_size) {
+        if (!receive(split_trans_target2initiator_buffer(trans), trans->target2initiator_buffer_size)) {
+            dprintln("USART: Receive failed.");
+            return TRANSACTION_NO_RESPONSE;
+        }
+    }
+
+    return TRANSACTION_END;
+}
diff --git a/platforms/chibios/drivers/serial_usart.h b/platforms/chibios/drivers/serial_usart.h
new file mode 100644
index 0000000000..c64e15566f
--- /dev/null
+++ b/platforms/chibios/drivers/serial_usart.h
@@ -0,0 +1,116 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "serial.h"
+#include "printf.h"
+
+#include <ch.h>
+#include <hal.h>
+
+#if !defined(SERIAL_USART_DRIVER)
+#    define SERIAL_USART_DRIVER SD1
+#endif
+
+#if !defined(USE_GPIOV1)
+/* The default PAL alternate modes are used to signal that the pins are used for USART. */
+#    if !defined(SERIAL_USART_TX_PAL_MODE)
+#        define SERIAL_USART_TX_PAL_MODE 7
+#    endif
+#    if !defined(SERIAL_USART_RX_PAL_MODE)
+#        define SERIAL_USART_RX_PAL_MODE 7
+#    endif
+#endif
+
+#if defined(SOFT_SERIAL_PIN)
+#    define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN
+#endif
+
+#if !defined(SERIAL_USART_TX_PIN)
+#    define SERIAL_USART_TX_PIN A9
+#endif
+
+#if !defined(SERIAL_USART_RX_PIN)
+#    define SERIAL_USART_RX_PIN A10
+#endif
+
+#if !defined(USART_CR1_M0)
+#    define USART_CR1_M0 USART_CR1_M  // some platforms (f1xx) dont have this so
+#endif
+
+#if !defined(SERIAL_USART_CR1)
+#    define SERIAL_USART_CR1 (USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0)  // parity enable, odd parity, 9 bit length
+#endif
+
+#if !defined(SERIAL_USART_CR2)
+#    define SERIAL_USART_CR2 (USART_CR2_STOP_1)  // 2 stop bits
+#endif
+
+#if !defined(SERIAL_USART_CR3)
+#    define SERIAL_USART_CR3 0
+#endif
+
+#if defined(USART1_REMAP)
+#    define USART_REMAP                             \
+        do {                                        \
+            (AFIO->MAPR |= AFIO_MAPR_USART1_REMAP); \
+        } while (0)
+#elif defined(USART2_REMAP)
+#    define USART_REMAP                             \
+        do {                                        \
+            (AFIO->MAPR |= AFIO_MAPR_USART2_REMAP); \
+        } while (0)
+#elif defined(USART3_PARTIALREMAP)
+#    define USART_REMAP                                          \
+        do {                                                     \
+            (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_PARTIALREMAP); \
+        } while (0)
+#elif defined(USART3_FULLREMAP)
+#    define USART_REMAP                                       \
+        do {                                                  \
+            (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_FULLREMAP); \
+        } while (0)
+#endif
+
+#if !defined(SELECT_SOFT_SERIAL_SPEED)
+#    define SELECT_SOFT_SERIAL_SPEED 1
+#endif
+
+#if defined(SERIAL_USART_SPEED)
+// Allow advanced users to directly set SERIAL_USART_SPEED
+#elif SELECT_SOFT_SERIAL_SPEED == 0
+#    define SERIAL_USART_SPEED 460800
+#elif SELECT_SOFT_SERIAL_SPEED == 1
+#    define SERIAL_USART_SPEED 230400
+#elif SELECT_SOFT_SERIAL_SPEED == 2
+#    define SERIAL_USART_SPEED 115200
+#elif SELECT_SOFT_SERIAL_SPEED == 3
+#    define SERIAL_USART_SPEED 57600
+#elif SELECT_SOFT_SERIAL_SPEED == 4
+#    define SERIAL_USART_SPEED 38400
+#elif SELECT_SOFT_SERIAL_SPEED == 5
+#    define SERIAL_USART_SPEED 19200
+#else
+#    error invalid SELECT_SOFT_SERIAL_SPEED value
+#endif
+
+#if !defined(SERIAL_USART_TIMEOUT)
+#    define SERIAL_USART_TIMEOUT 100
+#endif
+
+#define HANDSHAKE_MAGIC 7
diff --git a/platforms/chibios/drivers/spi_master.c b/platforms/chibios/drivers/spi_master.c
new file mode 100644
index 0000000000..28ddcbb2ba
--- /dev/null
+++ b/platforms/chibios/drivers/spi_master.c
@@ -0,0 +1,202 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#include "spi_master.h"
+
+#include "timer.h"
+
+static pin_t currentSlavePin = NO_PIN;
+
+#if defined(K20x) || defined(KL2x)
+static SPIConfig spiConfig = {NULL, 0, 0, 0};
+#else
+static SPIConfig spiConfig = {false, NULL, 0, 0, 0, 0};
+#endif
+
+__attribute__((weak)) void spi_init(void) {
+    static bool is_initialised = false;
+    if (!is_initialised) {
+        is_initialised = true;
+
+        // Try releasing special pins for a short time
+        setPinInput(SPI_SCK_PIN);
+        setPinInput(SPI_MOSI_PIN);
+        setPinInput(SPI_MISO_PIN);
+
+        chThdSleepMilliseconds(10);
+#if defined(USE_GPIOV1)
+        palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), SPI_SCK_PAL_MODE);
+        palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), SPI_MOSI_PAL_MODE);
+        palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), SPI_MISO_PAL_MODE);
+#else
+        palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
+        palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
+        palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
+#endif
+    }
+}
+
+bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
+    if (currentSlavePin != NO_PIN || slavePin == NO_PIN) {
+        return false;
+    }
+
+    uint16_t roundedDivisor = 2;
+    while (roundedDivisor < divisor) {
+        roundedDivisor <<= 1;
+    }
+
+    if (roundedDivisor < 2 || roundedDivisor > 256) {
+        return false;
+    }
+
+#if defined(K20x) || defined(KL2x)
+    spiConfig.tar0 = SPIx_CTARn_FMSZ(7) | SPIx_CTARn_ASC(1);
+
+    if (lsbFirst) {
+        spiConfig.tar0 |= SPIx_CTARn_LSBFE;
+    }
+
+    switch (mode) {
+        case 0:
+            break;
+        case 1:
+            spiConfig.tar0 |= SPIx_CTARn_CPHA;
+            break;
+        case 2:
+            spiConfig.tar0 |= SPIx_CTARn_CPOL;
+            break;
+        case 3:
+            spiConfig.tar0 |= SPIx_CTARn_CPHA | SPIx_CTARn_CPOL;
+            break;
+    }
+
+    switch (roundedDivisor) {
+        case 2:
+            spiConfig.tar0 |= SPIx_CTARn_BR(0);
+            break;
+        case 4:
+            spiConfig.tar0 |= SPIx_CTARn_BR(1);
+            break;
+        case 8:
+            spiConfig.tar0 |= SPIx_CTARn_BR(3);
+            break;
+        case 16:
+            spiConfig.tar0 |= SPIx_CTARn_BR(4);
+            break;
+        case 32:
+            spiConfig.tar0 |= SPIx_CTARn_BR(5);
+            break;
+        case 64:
+            spiConfig.tar0 |= SPIx_CTARn_BR(6);
+            break;
+        case 128:
+            spiConfig.tar0 |= SPIx_CTARn_BR(7);
+            break;
+        case 256:
+            spiConfig.tar0 |= SPIx_CTARn_BR(8);
+            break;
+    }
+#else
+    spiConfig.cr1 = 0;
+
+    if (lsbFirst) {
+        spiConfig.cr1 |= SPI_CR1_LSBFIRST;
+    }
+
+    switch (mode) {
+        case 0:
+            break;
+        case 1:
+            spiConfig.cr1 |= SPI_CR1_CPHA;
+            break;
+        case 2:
+            spiConfig.cr1 |= SPI_CR1_CPOL;
+            break;
+        case 3:
+            spiConfig.cr1 |= SPI_CR1_CPHA | SPI_CR1_CPOL;
+            break;
+    }
+
+    switch (roundedDivisor) {
+        case 2:
+            break;
+        case 4:
+            spiConfig.cr1 |= SPI_CR1_BR_0;
+            break;
+        case 8:
+            spiConfig.cr1 |= SPI_CR1_BR_1;
+            break;
+        case 16:
+            spiConfig.cr1 |= SPI_CR1_BR_1 | SPI_CR1_BR_0;
+            break;
+        case 32:
+            spiConfig.cr1 |= SPI_CR1_BR_2;
+            break;
+        case 64:
+            spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_0;
+            break;
+        case 128:
+            spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_1;
+            break;
+        case 256:
+            spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0;
+            break;
+    }
+#endif
+
+    currentSlavePin  = slavePin;
+    spiConfig.ssport = PAL_PORT(slavePin);
+    spiConfig.sspad  = PAL_PAD(slavePin);
+
+    setPinOutput(slavePin);
+    spiStart(&SPI_DRIVER, &spiConfig);
+    spiSelect(&SPI_DRIVER);
+
+    return true;
+}
+
+spi_status_t spi_write(uint8_t data) {
+    uint8_t rxData;
+    spiExchange(&SPI_DRIVER, 1, &data, &rxData);
+
+    return rxData;
+}
+
+spi_status_t spi_read(void) {
+    uint8_t data = 0;
+    spiReceive(&SPI_DRIVER, 1, &data);
+
+    return data;
+}
+
+spi_status_t spi_transmit(const uint8_t *data, uint16_t length) {
+    spiSend(&SPI_DRIVER, length, data);
+    return SPI_STATUS_SUCCESS;
+}
+
+spi_status_t spi_receive(uint8_t *data, uint16_t length) {
+    spiReceive(&SPI_DRIVER, length, data);
+    return SPI_STATUS_SUCCESS;
+}
+
+void spi_stop(void) {
+    if (currentSlavePin != NO_PIN) {
+        spiUnselect(&SPI_DRIVER);
+        spiStop(&SPI_DRIVER);
+        currentSlavePin = NO_PIN;
+    }
+}
diff --git a/platforms/chibios/drivers/spi_master.h b/platforms/chibios/drivers/spi_master.h
new file mode 100644
index 0000000000..b5a6ef1437
--- /dev/null
+++ b/platforms/chibios/drivers/spi_master.h
@@ -0,0 +1,93 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <ch.h>
+#include <hal.h>
+#include <stdbool.h>
+
+#include "gpio.h"
+#include "chibios_config.h"
+
+#ifndef SPI_DRIVER
+#    define SPI_DRIVER SPID2
+#endif
+
+#ifndef SPI_SCK_PIN
+#    define SPI_SCK_PIN B13
+#endif
+
+#ifndef SPI_SCK_PAL_MODE
+#    if defined(USE_GPIOV1)
+#        define SPI_SCK_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#    else
+#        define SPI_SCK_PAL_MODE 5
+#    endif
+#endif
+
+#ifndef SPI_MOSI_PIN
+#    define SPI_MOSI_PIN B15
+#endif
+
+#ifndef SPI_MOSI_PAL_MODE
+#    if defined(USE_GPIOV1)
+#        define SPI_MOSI_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#    else
+#        define SPI_MOSI_PAL_MODE 5
+#    endif
+#endif
+
+#ifndef SPI_MISO_PIN
+#    define SPI_MISO_PIN B14
+#endif
+
+#ifndef SPI_MISO_PAL_MODE
+#    if defined(USE_GPIOV1)
+#        define SPI_MISO_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#    else
+#        define SPI_MISO_PAL_MODE 5
+#    endif
+#endif
+
+typedef int16_t spi_status_t;
+
+#define SPI_STATUS_SUCCESS (0)
+#define SPI_STATUS_ERROR (-1)
+#define SPI_STATUS_TIMEOUT (-2)
+
+#define SPI_TIMEOUT_IMMEDIATE (0)
+#define SPI_TIMEOUT_INFINITE (0xFFFF)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+void spi_init(void);
+
+bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor);
+
+spi_status_t spi_write(uint8_t data);
+
+spi_status_t spi_read(void);
+
+spi_status_t spi_transmit(const uint8_t *data, uint16_t length);
+
+spi_status_t spi_receive(uint8_t *data, uint16_t length);
+
+void spi_stop(void);
+#ifdef __cplusplus
+}
+#endif
diff --git a/platforms/chibios/drivers/uart.c b/platforms/chibios/drivers/uart.c
new file mode 100644
index 0000000000..030335b342
--- /dev/null
+++ b/platforms/chibios/drivers/uart.c
@@ -0,0 +1,50 @@
+/* Copyright 2021
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#include "uart.h"
+
+#include "quantum.h"
+
+static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_CR1, SD1_CR2, SD1_CR3};
+
+void uart_init(uint32_t baud) {
+    static bool is_initialised = false;
+
+    if (!is_initialised) {
+        is_initialised = true;
+
+        serialConfig.speed = baud;
+
+#if defined(USE_GPIOV1)
+        palSetLineMode(SD1_TX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
+        palSetLineMode(SD1_RX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
+#else
+        palSetLineMode(SD1_TX_PIN, PAL_MODE_ALTERNATE(SD1_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+        palSetLineMode(SD1_RX_PIN, PAL_MODE_ALTERNATE(SD1_RX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+#endif
+        sdStart(&SERIAL_DRIVER, &serialConfig);
+    }
+}
+
+void uart_putchar(uint8_t c) { sdPut(&SERIAL_DRIVER, c); }
+
+uint8_t uart_getchar(void) {
+    msg_t res = sdGet(&SERIAL_DRIVER);
+
+    return (uint8_t)res;
+}
+
+bool uart_available(void) { return !sdGetWouldBlock(&SERIAL_DRIVER); }
diff --git a/platforms/chibios/drivers/uart.h b/platforms/chibios/drivers/uart.h
new file mode 100644
index 0000000000..b4e20e9fd3
--- /dev/null
+++ b/platforms/chibios/drivers/uart.h
@@ -0,0 +1,77 @@
+/* Copyright 2021
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+
+#include <hal.h>
+
+#ifndef SERIAL_DRIVER
+#    define SERIAL_DRIVER SD1
+#endif
+
+#ifndef SD1_TX_PIN
+#    define SD1_TX_PIN A9
+#endif
+
+#ifndef SD1_TX_PAL_MODE
+#    define SD1_TX_PAL_MODE 7
+#endif
+
+#ifndef SD1_RX_PIN
+#    define SD1_RX_PIN A10
+#endif
+
+#ifndef SD1_RX_PAL_MODE
+#    define SD1_RX_PAL_MODE 7
+#endif
+
+#ifndef SD1_CTS_PIN
+#    define SD1_CTS_PIN A11
+#endif
+
+#ifndef SD1_CTS_PAL_MODE
+#    define SD1_CTS_PAL_MODE 7
+#endif
+
+#ifndef SD1_RTS_PIN
+#    define SD1_RTS_PIN A12
+#endif
+
+#ifndef SD1_RTS_PAL_MODE
+#    define SD1_RTS_PAL_MODE 7
+#endif
+
+#ifndef SD1_CR1
+#    define SD1_CR1 0
+#endif
+
+#ifndef SD1_CR2
+#    define SD1_CR2 0
+#endif
+
+#ifndef SD1_CR3
+#    define SD1_CR3 0
+#endif
+
+void uart_init(uint32_t baud);
+
+void uart_putchar(uint8_t c);
+
+uint8_t uart_getchar(void);
+
+bool uart_available(void);
diff --git a/platforms/chibios/drivers/usbpd_stm32g4.c b/platforms/chibios/drivers/usbpd_stm32g4.c
new file mode 100644
index 0000000000..f16ca8aeae
--- /dev/null
+++ b/platforms/chibios/drivers/usbpd_stm32g4.c
@@ -0,0 +1,76 @@
+/* Copyright 2021 Nick Brassel (@tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <quantum.h>
+
+#ifndef USBPD_UCPD1_CFG1
+#    define USBPD_UCPD1_CFG1 (UCPD_CFG1_PSC_UCPDCLK_0 | UCPD_CFG1_TRANSWIN_3 | UCPD_CFG1_IFRGAP_4 | UCPD_CFG1_HBITCLKDIV_4)
+#endif  // USBPD_UCPD1_CFG1
+
+// Initialises the USBPD subsystem
+__attribute__((weak)) void usbpd_init(void) {
+    // Disable dead-battery signals
+    PWR->CR3 |= PWR_CR3_UCPD_DBDIS;
+    // Enable the clock for the UCPD1 peripheral
+    RCC->APB1ENR2 |= RCC_APB1ENR2_UCPD1EN;
+
+    // Copy the existing value
+    uint32_t CFG1 = UCPD1->CFG1;
+    // Force-disable UCPD1 before configuring
+    CFG1 &= ~UCPD_CFG1_UCPDEN;
+    // Configure UCPD1
+    CFG1 = USBPD_UCPD1_CFG1;
+    // Apply the changes
+    UCPD1->CFG1 = CFG1;
+    // Enable UCPD1
+    UCPD1->CFG1 |= UCPD_CFG1_UCPDEN;
+
+    // Copy the existing value
+    uint32_t CR = UCPD1->CR;
+    // Clear out ANASUBMODE (irrelevant as a sink device)
+    CR &= ~UCPD_CR_ANASUBMODE_Msk;
+    // Advertise our capabilities as a sink, with both CC lines enabled
+    CR |= UCPD_CR_ANAMODE | UCPD_CR_CCENABLE_Msk;
+    // Apply the changes
+    UCPD1->CR = CR;
+}
+
+// Gets the current state of the USBPD allowance
+__attribute__((weak)) usbpd_allowance_t usbpd_get_allowance(void) {
+    uint32_t CR = UCPD1->CR;
+
+    int ucpd_enabled = (UCPD1->CFG1 & UCPD_CFG1_UCPDEN_Msk) >> UCPD_CFG1_UCPDEN_Pos;
+    int anamode      = (CR & UCPD_CR_ANAMODE_Msk) >> UCPD_CR_ANAMODE_Pos;
+    int cc_enabled   = (CR & UCPD_CR_CCENABLE_Msk) >> UCPD_CR_CCENABLE_Pos;
+
+    if (ucpd_enabled && anamode && cc_enabled) {
+        uint32_t SR         = UCPD1->SR;
+        int      vstate_cc1 = (SR & UCPD_SR_TYPEC_VSTATE_CC1_Msk) >> UCPD_SR_TYPEC_VSTATE_CC1_Pos;
+        int      vstate_cc2 = (SR & UCPD_SR_TYPEC_VSTATE_CC2_Msk) >> UCPD_SR_TYPEC_VSTATE_CC2_Pos;
+        int      vstate_max = vstate_cc1 > vstate_cc2 ? vstate_cc1 : vstate_cc2;
+        switch (vstate_max) {
+            case 0:
+            case 1:
+                return USBPD_500MA;  // Note that this is 500mA (i.e. max USB 2.0), not 900mA, as we're not using USB 3.1 as a sink device.
+            case 2:
+                return USBPD_1500MA;
+            case 3:
+                return USBPD_3000MA;
+        }
+    }
+
+    return USBPD_500MA;
+}
\ No newline at end of file
diff --git a/platforms/chibios/drivers/ws2812.c b/platforms/chibios/drivers/ws2812.c
new file mode 100644
index 0000000000..0d12e2fb79
--- /dev/null
+++ b/platforms/chibios/drivers/ws2812.c
@@ -0,0 +1,114 @@
+#include "quantum.h"
+#include "ws2812.h"
+#include <ch.h>
+#include <hal.h>
+
+/* Adapted from https://github.com/bigjosh/SimpleNeoPixelDemo/ */
+
+#ifndef NOP_FUDGE
+#    if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX)
+#        define NOP_FUDGE 0.4
+#    else
+#        error("NOP_FUDGE configuration required")
+#        define NOP_FUDGE 1  // this just pleases the compile so the above error is easier to spot
+#    endif
+#endif
+
+// Push Pull or Open Drain Configuration
+// Default Push Pull
+#ifndef WS2812_EXTERNAL_PULLUP
+#    define WS2812_OUTPUT_MODE PAL_MODE_OUTPUT_PUSHPULL
+#else
+#    define WS2812_OUTPUT_MODE PAL_MODE_OUTPUT_OPENDRAIN
+#endif
+
+#define NUMBER_NOPS 6
+#define CYCLES_PER_SEC (STM32_SYSCLK / NUMBER_NOPS * NOP_FUDGE)
+#define NS_PER_SEC (1000000000L)  // Note that this has to be SIGNED since we want to be able to check for negative values of derivatives
+#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
+#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
+
+#define wait_ns(x)                                  \
+    do {                                            \
+        for (int i = 0; i < NS_TO_CYCLES(x); i++) { \
+            __asm__ volatile("nop\n\t"              \
+                             "nop\n\t"              \
+                             "nop\n\t"              \
+                             "nop\n\t"              \
+                             "nop\n\t"              \
+                             "nop\n\t");            \
+        }                                           \
+    } while (0)
+
+// These are the timing constraints taken mostly from the WS2812 datasheets
+// These are chosen to be conservative and avoid problems rather than for maximum throughput
+
+#define T1H 900           // Width of a 1 bit in ns
+#define T1L (1250 - T1H)  // Width of a 1 bit in ns
+
+#define T0H 350           // Width of a 0 bit in ns
+#define T0L (1250 - T0H)  // Width of a 0 bit in ns
+
+// The reset gap can be 6000 ns, but depending on the LED strip it may have to be increased
+// to values like 600000 ns. If it is too small, the pixels will show nothing most of the time.
+#define RES (1000 * WS2812_TRST_US)  // Width of the low gap between bits to cause a frame to latch
+
+void sendByte(uint8_t byte) {
+    // WS2812 protocol wants most significant bits first
+    for (unsigned char bit = 0; bit < 8; bit++) {
+        bool is_one = byte & (1 << (7 - bit));
+        // using something like wait_ns(is_one ? T1L : T0L) here throws off timings
+        if (is_one) {
+            // 1
+            writePinHigh(RGB_DI_PIN);
+            wait_ns(T1H);
+            writePinLow(RGB_DI_PIN);
+            wait_ns(T1L);
+        } else {
+            // 0
+            writePinHigh(RGB_DI_PIN);
+            wait_ns(T0H);
+            writePinLow(RGB_DI_PIN);
+            wait_ns(T0L);
+        }
+    }
+}
+
+void ws2812_init(void) { palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE); }
+
+// Setleds for standard RGB
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
+    static bool s_init = false;
+    if (!s_init) {
+        ws2812_init();
+        s_init = true;
+    }
+
+    // this code is very time dependent, so we need to disable interrupts
+    chSysLock();
+
+    for (uint8_t i = 0; i < leds; i++) {
+        // WS2812 protocol dictates grb order
+#if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB)
+        sendByte(ledarray[i].g);
+        sendByte(ledarray[i].r);
+        sendByte(ledarray[i].b);
+#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_RGB)
+        sendByte(ledarray[i].r);
+        sendByte(ledarray[i].g);
+        sendByte(ledarray[i].b);
+#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_BGR)
+        sendByte(ledarray[i].b);
+        sendByte(ledarray[i].g);
+        sendByte(ledarray[i].r);
+#endif
+
+#ifdef RGBW
+        sendByte(ledarray[i].w);
+#endif
+    }
+
+    wait_ns(RES);
+
+    chSysUnlock();
+}
diff --git a/platforms/chibios/drivers/ws2812_pwm.c b/platforms/chibios/drivers/ws2812_pwm.c
new file mode 100644
index 0000000000..e6af55b6b3
--- /dev/null
+++ b/platforms/chibios/drivers/ws2812_pwm.c
@@ -0,0 +1,311 @@
+#include "ws2812.h"
+#include "quantum.h"
+#include <hal.h>
+
+/* Adapted from https://github.com/joewa/WS2812-LED-Driver_ChibiOS/ */
+
+#ifdef RGBW
+#    error "RGBW not supported"
+#endif
+
+#ifndef WS2812_PWM_DRIVER
+#    define WS2812_PWM_DRIVER PWMD2  // TIMx
+#endif
+#ifndef WS2812_PWM_CHANNEL
+#    define WS2812_PWM_CHANNEL 2  // Channel
+#endif
+#ifndef WS2812_PWM_PAL_MODE
+#    define WS2812_PWM_PAL_MODE 2  // DI Pin's alternate function value
+#endif
+#ifndef WS2812_DMA_STREAM
+#    define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA Stream for TIMx_UP
+#endif
+#ifndef WS2812_DMA_CHANNEL
+#    define WS2812_DMA_CHANNEL 2  // DMA Channel for TIMx_UP
+#endif
+#if (STM32_DMA_SUPPORTS_DMAMUX == TRUE) && !defined(WS2812_DMAMUX_ID)
+#    error "please consult your MCU's datasheet and specify in your config.h: #define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM?_UP"
+#endif
+
+#ifndef WS2812_PWM_COMPLEMENTARY_OUTPUT
+#    define WS2812_PWM_OUTPUT_MODE PWM_OUTPUT_ACTIVE_HIGH
+#else
+#    if !STM32_PWM_USE_ADVANCED
+#        error "WS2812_PWM_COMPLEMENTARY_OUTPUT requires STM32_PWM_USE_ADVANCED == TRUE"
+#    endif
+#    define WS2812_PWM_OUTPUT_MODE PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH
+#endif
+
+// Push Pull or Open Drain Configuration
+// Default Push Pull
+#ifndef WS2812_EXTERNAL_PULLUP
+#    if defined(USE_GPIOV1)
+#        define WS2812_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#    else
+#        define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST | PAL_STM32_PUPDR_FLOATING
+#    endif
+#else
+#    if defined(USE_GPIOV1)
+#        define WS2812_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+#    else
+#        define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_OSPEED_HIGHEST | PAL_STM32_PUPDR_FLOATING
+#    endif
+#endif
+
+#ifndef WS2812_PWM_TARGET_PERIOD
+//#    define WS2812_PWM_TARGET_PERIOD 800000 // Original code is 800k...?
+#    define WS2812_PWM_TARGET_PERIOD 80000  // TODO: work out why 10x less on f303/f4x1
+#endif
+
+/* --- PRIVATE CONSTANTS ---------------------------------------------------- */
+
+#define WS2812_PWM_FREQUENCY (STM32_SYSCLK / 2)                             /**< Clock frequency of PWM, must be valid with respect to system clock! */
+#define WS2812_PWM_PERIOD (WS2812_PWM_FREQUENCY / WS2812_PWM_TARGET_PERIOD) /**< Clock period in ticks. 1 / 800kHz = 1.25 uS (as per datasheet) */
+
+/**
+ * @brief   Number of bit-periods to hold the data line low at the end of a frame
+ *
+ * The reset period for each frame is defined in WS2812_TRST_US.
+ * Calculate the number of zeroes to add at the end assuming 1.25 uS/bit:
+ */
+#define WS2812_RESET_BIT_N (1000 * WS2812_TRST_US / 1250)
+#define WS2812_COLOR_BIT_N (RGBLED_NUM * 24)                   /**< Number of data bits */
+#define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */
+
+/**
+ * @brief   High period for a zero, in ticks
+ *
+ * Per the datasheet:
+ * WS2812:
+ * - T0H: 200 nS to 500 nS, inclusive
+ * - T0L: 650 nS to 950 nS, inclusive
+ * WS2812B:
+ * - T0H: 200 nS to 500 nS, inclusive
+ * - T0L: 750 nS to 1050 nS, inclusive
+ *
+ * The duty cycle is calculated for a high period of 350 nS.
+ */
+#define WS2812_DUTYCYCLE_0 (WS2812_PWM_FREQUENCY / (1000000000 / 350))
+
+/**
+ * @brief   High period for a one, in ticks
+ *
+ * Per the datasheet:
+ * WS2812:
+ * - T1H: 550 nS to 850 nS, inclusive
+ * - T1L: 450 nS to 750 nS, inclusive
+ * WS2812B:
+ * - T1H: 750 nS to 1050 nS, inclusive
+ * - T1L: 200 nS to 500 nS, inclusive
+ *
+ * The duty cycle is calculated for a high period of 800 nS.
+ * This is in the middle of the specifications of the WS2812 and WS2812B.
+ */
+#define WS2812_DUTYCYCLE_1 (WS2812_PWM_FREQUENCY / (1000000000 / 800))
+
+/* --- PRIVATE MACROS ------------------------------------------------------- */
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given bit
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] byte:                 The byte number [0, 2]
+ * @param[in] bit:                  The bit number [0, 7]
+ *
+ * @return                          The bit index
+ */
+#define WS2812_BIT(led, byte, bit) (24 * (led) + 8 * (byte) + (7 - (bit)))
+
+#if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB)
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit
+ *
+ * @note    The red byte is the middle byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit number [0, 7]
+ *
+ * @return                          The bit index
+ */
+#    define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 1, (bit))
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit
+ *
+ * @note    The red byte is the first byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit number [0, 7]
+ *
+ * @return                          The bit index
+ */
+#    define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 0, (bit))
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit
+ *
+ * @note    The red byte is the last byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit index [0, 7]
+ *
+ * @return                          The bit index
+ */
+#    define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 2, (bit))
+
+#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_RGB)
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit
+ *
+ * @note    The red byte is the middle byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit number [0, 7]
+ *
+ * @return                          The bit index
+ */
+#    define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 0, (bit))
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit
+ *
+ * @note    The red byte is the first byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit number [0, 7]
+ *
+ * @return                          The bit index
+ */
+#    define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 1, (bit))
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit
+ *
+ * @note    The red byte is the last byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit index [0, 7]
+ *
+ * @return                          The bit index
+ */
+#    define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 2, (bit))
+
+#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_BGR)
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit
+ *
+ * @note    The red byte is the middle byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit number [0, 7]
+ *
+ * @return                          The bit index
+ */
+#    define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 2, (bit))
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit
+ *
+ * @note    The red byte is the first byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit number [0, 7]
+ *
+ * @return                          The bit index
+ */
+#    define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 1, (bit))
+
+/**
+ * @brief   Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit
+ *
+ * @note    The red byte is the last byte in the color packet
+ *
+ * @param[in] led:                  The led index [0, @ref RGBLED_NUM)
+ * @param[in] bit:                  The bit index [0, 7]
+ *
+ * @return                          The bit index
+ */
+#    define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 0, (bit))
+#endif
+
+/* --- PRIVATE VARIABLES ---------------------------------------------------- */
+
+static uint32_t ws2812_frame_buffer[WS2812_BIT_N + 1]; /**< Buffer for a frame */
+
+/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */
+/*
+ * Gedanke: Double-buffer type transactions: double buffer transfers using two memory pointers for
+the memory (while the DMA is reading/writing from/to a buffer, the application can
+write/read to/from the other buffer).
+ */
+
+void ws2812_init(void) {
+    // Initialize led frame buffer
+    uint32_t i;
+    for (i = 0; i < WS2812_COLOR_BIT_N; i++) ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0;      // All color bits are zero duty cycle
+    for (i = 0; i < WS2812_RESET_BIT_N; i++) ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0;  // All reset bits are zero
+
+    palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE);
+
+    // PWM Configuration
+    //#pragma GCC diagnostic ignored "-Woverride-init"  // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config
+    static const PWMConfig ws2812_pwm_config = {
+        .frequency = WS2812_PWM_FREQUENCY,
+        .period    = WS2812_PWM_PERIOD,  // Mit dieser Periode wird UDE-Event erzeugt und ein neuer Wert (Länge WS2812_BIT_N) vom DMA ins CCR geschrieben
+        .callback  = NULL,
+        .channels =
+            {
+                [0 ... 3]                = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL},     // Channels default to disabled
+                [WS2812_PWM_CHANNEL - 1] = {.mode = WS2812_PWM_OUTPUT_MODE, .callback = NULL},  // Turn on the channel we care about
+            },
+        .cr2  = 0,
+        .dier = TIM_DIER_UDE,  // DMA on update event for next period
+    };
+    //#pragma GCC diagnostic pop  // Restore command-line warning options
+
+    // Configure DMA
+    // dmaInit(); // Joe added this
+    dmaStreamAlloc(WS2812_DMA_STREAM - STM32_DMA_STREAM(0), 10, NULL, NULL);
+    dmaStreamSetPeripheral(WS2812_DMA_STREAM, &(WS2812_PWM_DRIVER.tim->CCR[WS2812_PWM_CHANNEL - 1]));  // Ziel ist der An-Zeit im Cap-Comp-Register
+    dmaStreamSetMemory0(WS2812_DMA_STREAM, ws2812_frame_buffer);
+    dmaStreamSetTransactionSize(WS2812_DMA_STREAM, WS2812_BIT_N);
+    dmaStreamSetMode(WS2812_DMA_STREAM, STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3));
+    // M2P: Memory 2 Periph; PL: Priority Level
+
+#if (STM32_DMA_SUPPORTS_DMAMUX == TRUE)
+    // If the MCU has a DMAMUX we need to assign the correct resource
+    dmaSetRequestSource(WS2812_DMA_STREAM, WS2812_DMAMUX_ID);
+#endif
+
+    // Start DMA
+    dmaStreamEnable(WS2812_DMA_STREAM);
+
+    // Configure PWM
+    // NOTE: It's required that preload be enabled on the timer channel CCR register. This is currently enabled in the
+    // ChibiOS driver code, so we don't have to do anything special to the timer. If we did, we'd have to start the timer,
+    // disable counting, enable the channel, and then make whatever configuration changes we need.
+    pwmStart(&WS2812_PWM_DRIVER, &ws2812_pwm_config);
+    pwmEnableChannel(&WS2812_PWM_DRIVER, WS2812_PWM_CHANNEL - 1, 0);  // Initial period is 0; output will be low until first duty cycle is DMA'd in
+}
+
+void ws2812_write_led(uint16_t led_number, uint8_t r, uint8_t g, uint8_t b) {
+    // Write color to frame buffer
+    for (uint8_t bit = 0; bit < 8; bit++) {
+        ws2812_frame_buffer[WS2812_RED_BIT(led_number, bit)]   = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
+        ws2812_frame_buffer[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
+        ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)]  = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
+    }
+}
+
+// Setleds for standard RGB
+void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) {
+    static bool s_init = false;
+    if (!s_init) {
+        ws2812_init();
+        s_init = true;
+    }
+
+    for (uint16_t i = 0; i < leds; i++) {
+        ws2812_write_led(i, ledarray[i].r, ledarray[i].g, ledarray[i].b);
+    }
+}
diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c
new file mode 100644
index 0000000000..377a929b94
--- /dev/null
+++ b/platforms/chibios/drivers/ws2812_spi.c
@@ -0,0 +1,159 @@
+#include "quantum.h"
+#include "ws2812.h"
+
+/* Adapted from https://github.com/gamazeps/ws2812b-chibios-SPIDMA/ */
+
+#ifdef RGBW
+#    error "RGBW not supported"
+#endif
+
+// Define the spi your LEDs are plugged to here
+#ifndef WS2812_SPI
+#    define WS2812_SPI SPID1
+#endif
+
+#ifndef WS2812_SPI_MOSI_PAL_MODE
+#    define WS2812_SPI_MOSI_PAL_MODE 5
+#endif
+
+#ifndef WS2812_SPI_SCK_PAL_MODE
+#    define WS2812_SPI_SCK_PAL_MODE 5
+#endif
+
+// Push Pull or Open Drain Configuration
+// Default Push Pull
+#ifndef WS2812_EXTERNAL_PULLUP
+#    if defined(USE_GPIOV1)
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#    else
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL
+#    endif
+#else
+#    if defined(USE_GPIOV1)
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+#    else
+#        define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN
+#    endif
+#endif
+
+// Define SPI config speed
+// baudrate should target 3.2MHz
+// F072 fpclk = 48MHz
+// 48/16 = 3Mhz
+#if WS2812_SPI_DIVISOR == 2
+#    define WS2812_SPI_DIVISOR (0)
+#elif WS2812_SPI_DIVISOR == 4
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_0)
+#elif WS2812_SPI_DIVISOR == 8
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_1)
+#elif WS2812_SPI_DIVISOR == 16  // same as default
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#elif WS2812_SPI_DIVISOR == 32
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_2)
+#elif WS2812_SPI_DIVISOR == 64
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_0)
+#elif WS2812_SPI_DIVISOR == 128
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1)
+#elif WS2812_SPI_DIVISOR == 256
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#else
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0)  // default
+#endif
+
+// Use SPI circular buffer
+#ifdef WS2812_SPI_USE_CIRCULAR_BUFFER
+#    define WS2812_SPI_BUFFER_MODE 1  // circular buffer
+#else
+#    define WS2812_SPI_BUFFER_MODE 0  // normal buffer
+#endif
+
+#if defined(USE_GPIOV1)
+#    define WS2812_SCK_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL
+#else
+#    define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL
+#endif
+
+#define BYTES_FOR_LED_BYTE 4
+#define NB_COLORS 3
+#define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * NB_COLORS)
+#define DATA_SIZE (BYTES_FOR_LED * RGBLED_NUM)
+#define RESET_SIZE (1000 * WS2812_TRST_US / (2 * 1250))
+#define PREAMBLE_SIZE 4
+
+static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE] = {0};
+
+/*
+ * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
+ * the ws2812b protocol, we use this helper function to translate bytes into
+ * 0s and 1s for the LED (with the appropriate timing).
+ */
+static uint8_t get_protocol_eq(uint8_t data, int pos) {
+    uint8_t eq = 0;
+    if (data & (1 << (2 * (3 - pos))))
+        eq = 0b1110;
+    else
+        eq = 0b1000;
+    if (data & (2 << (2 * (3 - pos))))
+        eq += 0b11100000;
+    else
+        eq += 0b10000000;
+    return eq;
+}
+
+static void set_led_color_rgb(LED_TYPE color, int pos) {
+    uint8_t* tx_start = &txbuf[PREAMBLE_SIZE];
+
+#if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB)
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.g, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.r, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.b, j);
+#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_RGB)
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.r, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.b, j);
+#elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_BGR)
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.b, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j);
+    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.r, j);
+#endif
+}
+
+void ws2812_init(void) {
+    palSetLineMode(RGB_DI_PIN, WS2812_MOSI_OUTPUT_MODE);
+
+#ifdef WS2812_SPI_SCK_PIN
+    palSetLineMode(WS2812_SPI_SCK_PIN, WS2812_SCK_OUTPUT_MODE);
+#endif  // WS2812_SPI_SCK_PIN
+
+    // TODO: more dynamic baudrate
+    static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR};
+
+    spiAcquireBus(&WS2812_SPI);     /* Acquire ownership of the bus.    */
+    spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters.       */
+    spiSelect(&WS2812_SPI);         /* Slave Select assertion.          */
+#ifdef WS2812_SPI_USE_CIRCULAR_BUFFER
+    spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf);
+#endif
+}
+
+void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) {
+    static bool s_init = false;
+    if (!s_init) {
+        ws2812_init();
+        s_init = true;
+    }
+
+    for (uint8_t i = 0; i < leds; i++) {
+        set_led_color_rgb(ledarray[i], i);
+    }
+
+    // Send async - each led takes ~0.03ms, 50 leds ~1.5ms, animations flushing faster than send will cause issues.
+    // Instead spiSend can be used to send synchronously (or the thread logic can be added back).
+#ifndef WS2812_SPI_USE_CIRCULAR_BUFFER
+#    ifdef WS2812_SPI_SYNC
+    spiSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf);
+#    else
+    spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf);
+#    endif
+#endif
+}
diff --git a/platforms/chibios/flash.mk b/platforms/chibios/flash.mk
new file mode 100644
index 0000000000..c0b32c2f2b
--- /dev/null
+++ b/platforms/chibios/flash.mk
@@ -0,0 +1,87 @@
+# Hey Emacs, this is a -*- makefile -*-
+##############################################################################
+# Architecture or project specific options
+#
+
+DFU_ARGS ?=
+ifneq ("$(SERIAL)","")
+	DFU_ARGS += -S $(SERIAL)
+endif
+
+DFU_UTIL ?= dfu-util
+
+define EXEC_DFU_UTIL
+	if ! $(DFU_UTIL) -l | grep -q "Found DFU"; then \
+		printf "$(MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY)" ;\
+		sleep $(BOOTLOADER_RETRY_TIME) ;\
+		while ! $(DFU_UTIL) -l | grep -q "Found DFU"; do \
+			printf "." ;\
+			sleep $(BOOTLOADER_RETRY_TIME) ;\
+		done ;\
+		printf "\n" ;\
+	fi
+	$(DFU_UTIL) $(DFU_ARGS) -D $(BUILD_DIR)/$(TARGET).bin
+endef
+
+dfu-util: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter
+	$(call EXEC_DFU_UTIL)
+
+# TODO: Remove once ARM has a way to configure EECONFIG_HANDEDNESS
+#       within the emulated eeprom via dfu-util or another tool
+ifneq (,$(filter $(MAKECMDGOALS),dfu-util-split-left))
+    OPT_DEFS += -DINIT_EE_HANDS_LEFT
+endif
+
+ifneq (,$(filter $(MAKECMDGOALS),dfu-util-split-right))
+    OPT_DEFS += -DINIT_EE_HANDS_RIGHT
+endif
+
+dfu-util-split-left: dfu-util
+
+dfu-util-split-right: dfu-util
+
+ST_LINK_CLI ?= st-link_cli
+ST_LINK_ARGS ?=
+
+st-link-cli: $(BUILD_DIR)/$(TARGET).hex sizeafter
+	$(ST_LINK_CLI) $(ST_LINK_ARGS) -q -c SWD -p $(BUILD_DIR)/$(TARGET).hex -Rst
+
+ST_FLASH ?= st-flash
+ST_FLASH_ARGS ?=
+
+st-flash: $(BUILD_DIR)/$(TARGET).hex sizeafter
+	$(ST_FLASH) $(ST_FLASH_ARGS) --reset --format ihex write $(BUILD_DIR)/$(TARGET).hex
+
+# Autodetect teensy loader
+ifndef TEENSY_LOADER_CLI
+    ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
+        TEENSY_LOADER_CLI ?= teensy-loader-cli
+    else
+        TEENSY_LOADER_CLI ?= teensy_loader_cli
+    endif
+endif
+
+TEENSY_LOADER_CLI_MCU ?= $(MCU_LDSCRIPT)
+
+define EXEC_TEENSY
+	$(TEENSY_LOADER_CLI) -mmcu=$(TEENSY_LOADER_CLI_MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
+endef
+
+teensy: $(BUILD_DIR)/$(TARGET).hex cpfirmware sizeafter
+	$(call EXEC_TEENSY)
+
+
+flash: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter
+ifneq ($(strip $(PROGRAM_CMD)),)
+	$(UNSYNC_OUTPUT_CMD) && $(PROGRAM_CMD)
+else ifeq ($(strip $(BOOTLOADER)),kiibohd)
+	$(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL)
+else ifeq ($(strip $(MCU_FAMILY)),KINETIS)
+	$(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY)
+else ifeq ($(strip $(MCU_FAMILY)),MIMXRT1062)
+	$(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY)
+else ifeq ($(strip $(MCU_FAMILY)),STM32)
+	$(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL)
+else
+	$(PRINT_OK); $(SILENT) || printf "$(MSG_FLASH_BOOTLOADER)"
+endif