diff options
Diffstat (limited to 'platforms/chibios')
24 files changed, 1844 insertions, 63 deletions
diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F405XG/board/board.mk new file mode 100644 index 0000000000..6c837bb8ee --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC)
\ No newline at end of file diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/board.h new file mode 100644 index 0000000000..8cb771bc12 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/board.h @@ -0,0 +1,28 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#define STM32_HSECLK 12000000 +// The following is required to disable the pull-down on PA9, when PA9 is used for the keyboard matrix: +#define BOARD_OTG_NOVBUSSENS + +#include_next "board.h" + +#undef STM32_HSE_BYPASS + +#undef STM32F407xx +#define STM32F405xG +#define STM32F405xx diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h new file mode 100644 index 0000000000..cc52a953ed --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h @@ -0,0 +1,23 @@ +/* Copyright 2021 Andrei Purdea + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h new file mode 100644 index 0000000000..d2ec632d9f --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h @@ -0,0 +1,355 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF +#define STM32F405_MCUCONF +#define STM32F415_MCUCONF +#define STM32F407_MCUCONF +#define STM32F417_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 12 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 1000 +#define STM32_SDC_READ_TIMEOUT_MS 1000 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_HOST_WAKEUP_DURATION 2 + +#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/config.h b/platforms/chibios/boards/QMK_PROTON_C/configs/config.h index a73f0c0b47..fa1a73c354 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/config.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/config.h @@ -18,3 +18,12 @@ #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif + +#ifdef CONVERT_TO_PROTON_C +# ifndef I2C1_SDA_PIN +# define I2C1_SDA_PIN D1 +# endif +# ifndef I2C1_SCL_PIN +# define I2C1_SCL_PIN D0 +# endif +#endif diff --git a/platforms/chibios/boards/common/ld/STM32F401xC.ld b/platforms/chibios/boards/common/ld/STM32F401xC.ld new file mode 100644 index 0000000000..8fae66cec9 --- /dev/null +++ b/platforms/chibios/boards/common/ld/STM32F401xC.ld @@ -0,0 +1,85 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F401xC memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* Sector 0 - Init code as ROM bootloader assumes application starts here */ + flash1 (rx) : org = 0x08004000, len = 16k /* Sector 1 - Emulated eeprom */ + flash2 (rx) : org = 0x08008000, len = 256k - 32k /* Sector 2..6 - Rest of firmware */ + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 64k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash2); +REGION_ALIAS("XTORS_FLASH_LMA", flash2); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash2); +REGION_ALIAS("TEXT_FLASH_LMA", flash2); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash2); +REGION_ALIAS("RODATA_FLASH_LMA", flash2); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash2); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash2); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/platforms/chibios/boards/common/ld/STM32F405xG.ld b/platforms/chibios/boards/common/ld/STM32F405xG.ld new file mode 100644 index 0000000000..b7d0baa210 --- /dev/null +++ b/platforms/chibios/boards/common/ld/STM32F405xG.ld @@ -0,0 +1,86 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F405xG memory setup. + * Note: Use of ram1 and ram2 is mutually exclusive with use of ram0. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* Sector 0 - Init code as ROM bootloader assumes application starts here */ + flash1 (rx) : org = 0x08004000, len = 16k /* Sector 1 - Emulated eeprom */ + flash2 (rx) : org = 0x08008000, len = 1M - 32k /* Sector 2..6 - Rest of firmware */ + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 128k /* SRAM1 + SRAM2 */ + ram1 (wx) : org = 0x20000000, len = 112k /* SRAM1 */ + ram2 (wx) : org = 0x2001C000, len = 16k /* SRAM2 */ + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x10000000, len = 64k /* CCM SRAM */ + ram5 (wx) : org = 0x40024000, len = 4k /* BCKP SRAM */ + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash2); +REGION_ALIAS("XTORS_FLASH_LMA", flash2); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash2); +REGION_ALIAS("TEXT_FLASH_LMA", flash2); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash2); +REGION_ALIAS("RODATA_FLASH_LMA", flash2); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash2); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash2); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/platforms/chibios/boards/common/ld/STM32F411xE.ld b/platforms/chibios/boards/common/ld/STM32F411xE.ld new file mode 100644 index 0000000000..aea8084b51 --- /dev/null +++ b/platforms/chibios/boards/common/ld/STM32F411xE.ld @@ -0,0 +1,85 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F411xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* Sector 0 - Init code as ROM bootloader assumes application starts here */ + flash1 (rx) : org = 0x08004000, len = 16k /* Sector 1 - Emulated eeprom */ + flash2 (rx) : org = 0x08008000, len = 512k - 32k /* Sector 2..7 - Rest of firmware */ + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 128k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash2); +REGION_ALIAS("XTORS_FLASH_LMA", flash2); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash2); +REGION_ALIAS("TEXT_FLASH_LMA", flash2); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash2); +REGION_ALIAS("RODATA_FLASH_LMA", flash2); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash2); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash2); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/platforms/chibios/drivers/audio_dac.h b/platforms/chibios/drivers/audio_dac.h new file mode 100644 index 0000000000..07cd622ead --- /dev/null +++ b/platforms/chibios/drivers/audio_dac.h @@ -0,0 +1,126 @@ +/* Copyright 2019 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#ifndef A4 +# define A4 PAL_LINE(GPIOA, 4) +#endif +#ifndef A5 +# define A5 PAL_LINE(GPIOA, 5) +#endif + +/** + * Size of the dac_buffer arrays. All must be the same size. + */ +#define AUDIO_DAC_BUFFER_SIZE 256U + +/** + * Highest value allowed sample value. + + * since the DAC is limited to 12 bit, the absolute max is 0xfff = 4095U; + * lower values adjust the peak-voltage aka volume down. + * adjusting this value has only an effect on a sample-buffer whose values are + * are NOT pregenerated - see square-wave + */ +#ifndef AUDIO_DAC_SAMPLE_MAX +# define AUDIO_DAC_SAMPLE_MAX 4095U +#endif + +#if !defined(AUDIO_DAC_SAMPLE_RATE) && !defined(AUDIO_MAX_SIMULTANEOUS_TONES) && !defined(AUDIO_DAC_QUALITY_VERY_LOW) && !defined(AUDIO_DAC_QUALITY_LOW) && !defined(AUDIO_DAC_QUALITY_HIGH) && !defined(AUDIO_DAC_QUALITY_VERY_HIGH) +# define AUDIO_DAC_QUALITY_SANE_MINIMUM +#endif + +/** + * These presets allow you to quickly switch between quality settings for + * the DAC. The sample rate and maximum number of simultaneous tones roughly + * has an inverse relationship - slightly higher sample rates may be possible. + * + * NOTE: a high sample-rate results in a higher cpu-load, which might lead to + * (audible) discontinuities and/or starve other processes of cpu-time + * (like RGB-led back-lighting, ...) + */ +#ifdef AUDIO_DAC_QUALITY_VERY_LOW +# define AUDIO_DAC_SAMPLE_RATE 11025U +# define AUDIO_MAX_SIMULTANEOUS_TONES 8 +#endif + +#ifdef AUDIO_DAC_QUALITY_LOW +# define AUDIO_DAC_SAMPLE_RATE 22050U +# define AUDIO_MAX_SIMULTANEOUS_TONES 4 +#endif + +#ifdef AUDIO_DAC_QUALITY_HIGH +# define AUDIO_DAC_SAMPLE_RATE 44100U +# define AUDIO_MAX_SIMULTANEOUS_TONES 2 +#endif + +#ifdef AUDIO_DAC_QUALITY_VERY_HIGH +# define AUDIO_DAC_SAMPLE_RATE 88200U +# define AUDIO_MAX_SIMULTANEOUS_TONES 1 +#endif + +#ifdef AUDIO_DAC_QUALITY_SANE_MINIMUM +/* a sane-minimum config: with a trade-off between cpu-load and tone-range + * + * the (currently) highest defined note is NOTE_B8 with 7902Hz; if we now + * aim for an even even multiple of the buffer-size, we end up with: + * ( roundUptoPow2(highest note / AUDIO_DAC_BUFFER_SIZE) * nyquist-rate * AUDIO_DAC_BUFFER_SIZE) + * 7902/256 = 30.867 * 2 * 256 ~= 16384 + * which works out (but the 'scope shows some sampling artifacts with lower harmonics :-P) + */ +# define AUDIO_DAC_SAMPLE_RATE 16384U +# define AUDIO_MAX_SIMULTANEOUS_TONES 8 +#endif + +/** + * Effective bit-rate of the DAC. 44.1khz is the standard for most audio - any + * lower will sacrifice perceptible audio quality. Any higher will limit the + * number of simultaneous tones. In most situations, a tenth (1/10) of the + * sample rate is where notes become unbearable. + */ +#ifndef AUDIO_DAC_SAMPLE_RATE +# define AUDIO_DAC_SAMPLE_RATE 44100U +#endif + +/** + * The number of tones that can be played simultaneously. If too high a value + * is used here, the keyboard will freeze and glitch-out when that many tones + * are being played. + */ +#ifndef AUDIO_MAX_SIMULTANEOUS_TONES +# define AUDIO_MAX_SIMULTANEOUS_TONES 2 +#endif + +/** + * The default value of the DAC when not playing anything. Certain hardware + * setups may require a high (AUDIO_DAC_SAMPLE_MAX) or low (0) value here. + * Since multiple added sine waves tend to oscillate around the midpoint, + * and possibly never/rarely reach either 0 of MAX, 1/2 MAX can be a + * reasonable default value. + */ +#ifndef AUDIO_DAC_OFF_VALUE +# define AUDIO_DAC_OFF_VALUE AUDIO_DAC_SAMPLE_MAX / 2 +#endif + +#if AUDIO_DAC_OFF_VALUE > AUDIO_DAC_SAMPLE_MAX +# error "AUDIO_DAC: OFF_VALUE may not be larger than SAMPLE_MAX" +#endif + +/** + *user overridable sample generation/processing + */ +uint16_t dac_value_generate(void); diff --git a/platforms/chibios/drivers/audio_dac_additive.c b/platforms/chibios/drivers/audio_dac_additive.c new file mode 100644 index 0000000000..db304adb87 --- /dev/null +++ b/platforms/chibios/drivers/audio_dac_additive.c @@ -0,0 +1,335 @@ +/* Copyright 2016-2019 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "audio.h" +#include <ch.h> +#include <hal.h> + +/* + Audio Driver: DAC + + which utilizes the dac unit many STM32 are equipped with, to output a modulated waveform from samples stored in the dac_buffer_* array who are passed to the hardware through DMA + + it is also possible to have a custom sample-LUT by implementing/overriding 'dac_value_generate' + + this driver allows for multiple simultaneous tones to be played through one single channel by doing additive wave-synthesis +*/ + +#if !defined(AUDIO_PIN) +# error "Audio feature enabled, but no suitable pin selected as AUDIO_PIN - see docs/feature_audio under 'ARM (DAC additive)' for available options." +#endif +#if defined(AUDIO_PIN_ALT) && !defined(AUDIO_PIN_ALT_AS_NEGATIVE) +# pragma message "Audio feature: AUDIO_PIN_ALT set, but not AUDIO_PIN_ALT_AS_NEGATIVE - pin will be left unused; audio might still work though." +#endif + +#if !defined(AUDIO_PIN_ALT) +// no ALT pin defined is valid, but the c-ifs below need some value set +# define AUDIO_PIN_ALT PAL_NOLINE +#endif + +#if !defined(AUDIO_DAC_SAMPLE_WAVEFORM_SINE) && !defined(AUDIO_DAC_SAMPLE_WAVEFORM_TRIANGLE) && !defined(AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE) && !defined(AUDIO_DAC_SAMPLE_WAVEFORM_TRAPEZOID) +# define AUDIO_DAC_SAMPLE_WAVEFORM_SINE +#endif + +#ifdef AUDIO_DAC_SAMPLE_WAVEFORM_SINE +/* one full sine wave over [0,2*pi], but shifted up one amplitude and left pi/4; for the samples to start at 0 + */ +static const dacsample_t dac_buffer_sine[AUDIO_DAC_BUFFER_SIZE] = { + // 256 values, max 4095 + 0x0, 0x1, 0x2, 0x6, 0xa, 0xf, 0x16, 0x1e, 0x27, 0x32, 0x3d, 0x4a, 0x58, 0x67, 0x78, 0x89, 0x9c, 0xb0, 0xc5, 0xdb, 0xf2, 0x10a, 0x123, 0x13e, 0x159, 0x175, 0x193, 0x1b1, 0x1d1, 0x1f1, 0x212, 0x235, 0x258, 0x27c, 0x2a0, 0x2c6, 0x2ed, 0x314, 0x33c, 0x365, 0x38e, 0x3b8, 0x3e3, 0x40e, 0x43a, 0x467, 0x494, 0x4c2, 0x4f0, 0x51f, 0x54e, 0x57d, 0x5ad, 0x5dd, 0x60e, 0x63f, 0x670, 0x6a1, 0x6d3, 0x705, 0x737, 0x769, 0x79b, 0x7cd, 0x800, 0x832, 0x864, 0x896, 0x8c8, 0x8fa, 0x92c, 0x95e, 0x98f, 0x9c0, 0x9f1, 0xa22, 0xa52, 0xa82, 0xab1, 0xae0, 0xb0f, 0xb3d, 0xb6b, 0xb98, 0xbc5, 0xbf1, 0xc1c, 0xc47, 0xc71, 0xc9a, 0xcc3, 0xceb, 0xd12, 0xd39, 0xd5f, 0xd83, 0xda7, 0xdca, 0xded, 0xe0e, 0xe2e, 0xe4e, 0xe6c, 0xe8a, 0xea6, 0xec1, 0xedc, 0xef5, 0xf0d, 0xf24, 0xf3a, 0xf4f, 0xf63, 0xf76, 0xf87, 0xf98, 0xfa7, 0xfb5, 0xfc2, 0xfcd, 0xfd8, 0xfe1, 0xfe9, 0xff0, 0xff5, 0xff9, 0xffd, 0xffe, + 0xfff, 0xffe, 0xffd, 0xff9, 0xff5, 0xff0, 0xfe9, 0xfe1, 0xfd8, 0xfcd, 0xfc2, 0xfb5, 0xfa7, 0xf98, 0xf87, 0xf76, 0xf63, 0xf4f, 0xf3a, 0xf24, 0xf0d, 0xef5, 0xedc, 0xec1, 0xea6, 0xe8a, 0xe6c, 0xe4e, 0xe2e, 0xe0e, 0xded, 0xdca, 0xda7, 0xd83, 0xd5f, 0xd39, 0xd12, 0xceb, 0xcc3, 0xc9a, 0xc71, 0xc47, 0xc1c, 0xbf1, 0xbc5, 0xb98, 0xb6b, 0xb3d, 0xb0f, 0xae0, 0xab1, 0xa82, 0xa52, 0xa22, 0x9f1, 0x9c0, 0x98f, 0x95e, 0x92c, 0x8fa, 0x8c8, 0x896, 0x864, 0x832, 0x800, 0x7cd, 0x79b, 0x769, 0x737, 0x705, 0x6d3, 0x6a1, 0x670, 0x63f, 0x60e, 0x5dd, 0x5ad, 0x57d, 0x54e, 0x51f, 0x4f0, 0x4c2, 0x494, 0x467, 0x43a, 0x40e, 0x3e3, 0x3b8, 0x38e, 0x365, 0x33c, 0x314, 0x2ed, 0x2c6, 0x2a0, 0x27c, 0x258, 0x235, 0x212, 0x1f1, 0x1d1, 0x1b1, 0x193, 0x175, 0x159, 0x13e, 0x123, 0x10a, 0xf2, 0xdb, 0xc5, 0xb0, 0x9c, 0x89, 0x78, 0x67, 0x58, 0x4a, 0x3d, 0x32, 0x27, 0x1e, 0x16, 0xf, 0xa, 0x6, 0x2, 0x1}; +#endif // AUDIO_DAC_SAMPLE_WAVEFORM_SINE +#ifdef AUDIO_DAC_SAMPLE_WAVEFORM_TRIANGLE +static const dacsample_t dac_buffer_triangle[AUDIO_DAC_BUFFER_SIZE] = { + // 256 values, max 4095 + 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0, 0xc0, 0xe0, 0x100, 0x120, 0x140, 0x160, 0x180, 0x1a0, 0x1c0, 0x1e0, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0x300, 0x320, 0x340, 0x360, 0x380, 0x3a0, 0x3c0, 0x3e0, 0x400, 0x420, 0x440, 0x460, 0x480, 0x4a0, 0x4c0, 0x4e0, 0x500, 0x520, 0x540, 0x560, 0x580, 0x5a0, 0x5c0, 0x5e0, 0x600, 0x620, 0x640, 0x660, 0x680, 0x6a0, 0x6c0, 0x6e0, 0x700, 0x720, 0x740, 0x760, 0x780, 0x7a0, 0x7c0, 0x7e0, 0x800, 0x81f, 0x83f, 0x85f, 0x87f, 0x89f, 0x8bf, 0x8df, 0x8ff, 0x91f, 0x93f, 0x95f, 0x97f, 0x99f, 0x9bf, 0x9df, 0x9ff, 0xa1f, 0xa3f, 0xa5f, 0xa7f, 0xa9f, 0xabf, 0xadf, 0xaff, 0xb1f, 0xb3f, 0xb5f, 0xb7f, 0xb9f, 0xbbf, 0xbdf, 0xbff, 0xc1f, 0xc3f, 0xc5f, 0xc7f, 0xc9f, 0xcbf, 0xcdf, 0xcff, 0xd1f, 0xd3f, 0xd5f, 0xd7f, 0xd9f, 0xdbf, 0xddf, 0xdff, 0xe1f, 0xe3f, 0xe5f, 0xe7f, 0xe9f, 0xebf, 0xedf, 0xeff, 0xf1f, 0xf3f, 0xf5f, 0xf7f, 0xf9f, 0xfbf, 0xfdf, + 0xfff, 0xfdf, 0xfbf, 0xf9f, 0xf7f, 0xf5f, 0xf3f, 0xf1f, 0xeff, 0xedf, 0xebf, 0xe9f, 0xe7f, 0xe5f, 0xe3f, 0xe1f, 0xdff, 0xddf, 0xdbf, 0xd9f, 0xd7f, 0xd5f, 0xd3f, 0xd1f, 0xcff, 0xcdf, 0xcbf, 0xc9f, 0xc7f, 0xc5f, 0xc3f, 0xc1f, 0xbff, 0xbdf, 0xbbf, 0xb9f, 0xb7f, 0xb5f, 0xb3f, 0xb1f, 0xaff, 0xadf, 0xabf, 0xa9f, 0xa7f, 0xa5f, 0xa3f, 0xa1f, 0x9ff, 0x9df, 0x9bf, 0x99f, 0x97f, 0x95f, 0x93f, 0x91f, 0x8ff, 0x8df, 0x8bf, 0x89f, 0x87f, 0x85f, 0x83f, 0x81f, 0x800, 0x7e0, 0x7c0, 0x7a0, 0x780, 0x760, 0x740, 0x720, 0x700, 0x6e0, 0x6c0, 0x6a0, 0x680, 0x660, 0x640, 0x620, 0x600, 0x5e0, 0x5c0, 0x5a0, 0x580, 0x560, 0x540, 0x520, 0x500, 0x4e0, 0x4c0, 0x4a0, 0x480, 0x460, 0x440, 0x420, 0x400, 0x3e0, 0x3c0, 0x3a0, 0x380, 0x360, 0x340, 0x320, 0x300, 0x2e0, 0x2c0, 0x2a0, 0x280, 0x260, 0x240, 0x220, 0x200, 0x1e0, 0x1c0, 0x1a0, 0x180, 0x160, 0x140, 0x120, 0x100, 0xe0, 0xc0, 0xa0, 0x80, 0x60, 0x40, 0x20}; +#endif // AUDIO_DAC_SAMPLE_WAVEFORM_TRIANGLE +#ifdef AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE +static const dacsample_t dac_buffer_square[AUDIO_DAC_BUFFER_SIZE] = { + [0 ... AUDIO_DAC_BUFFER_SIZE / 2 - 1] = 0, // first and + [AUDIO_DAC_BUFFER_SIZE / 2 ... AUDIO_DAC_BUFFER_SIZE - 1] = AUDIO_DAC_SAMPLE_MAX, // second half +}; +#endif // AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE +/* +// four steps: 0, 1/3, 2/3 and 1 +static const dacsample_t dac_buffer_staircase[AUDIO_DAC_BUFFER_SIZE] = { + [0 ... AUDIO_DAC_BUFFER_SIZE/3 -1 ] = 0, + [AUDIO_DAC_BUFFER_SIZE / 4 ... AUDIO_DAC_BUFFER_SIZE / 2 -1 ] = AUDIO_DAC_SAMPLE_MAX / 3, + [AUDIO_DAC_BUFFER_SIZE / 2 ... 3 * AUDIO_DAC_BUFFER_SIZE / 4 -1 ] = 2 * AUDIO_DAC_SAMPLE_MAX / 3, + [3 * AUDIO_DAC_BUFFER_SIZE / 4 ... AUDIO_DAC_BUFFER_SIZE -1 ] = AUDIO_DAC_SAMPLE_MAX, +} +*/ +#ifdef AUDIO_DAC_SAMPLE_WAVEFORM_TRAPEZOID +static const dacsample_t dac_buffer_trapezoid[AUDIO_DAC_BUFFER_SIZE] = {0x0, 0x1f, 0x7f, 0xdf, 0x13f, 0x19f, 0x1ff, 0x25f, 0x2bf, 0x31f, 0x37f, 0x3df, 0x43f, 0x49f, 0x4ff, 0x55f, 0x5bf, 0x61f, 0x67f, 0x6df, 0x73f, 0x79f, 0x7ff, 0x85f, 0x8bf, 0x91f, 0x97f, 0x9df, 0xa3f, 0xa9f, 0xaff, 0xb5f, 0xbbf, 0xc1f, 0xc7f, 0xcdf, 0xd3f, 0xd9f, 0xdff, 0xe5f, 0xebf, 0xf1f, 0xf7f, 0xfdf, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, 0xfff, + 0xfff, 0xfdf, 0xf7f, 0xf1f, 0xebf, 0xe5f, 0xdff, 0xd9f, 0xd3f, 0xcdf, 0xc7f, 0xc1f, 0xbbf, 0xb5f, 0xaff, 0xa9f, 0xa3f, 0x9df, 0x97f, 0x91f, 0x8bf, 0x85f, 0x7ff, 0x79f, 0x73f, 0x6df, 0x67f, 0x61f, 0x5bf, 0x55f, 0x4ff, 0x49f, 0x43f, 0x3df, 0x37f, 0x31f, 0x2bf, 0x25f, 0x1ff, 0x19f, 0x13f, 0xdf, 0x7f, 0x1f, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; +#endif // AUDIO_DAC_SAMPLE_WAVEFORM_TRAPEZOID + +static dacsample_t dac_buffer_empty[AUDIO_DAC_BUFFER_SIZE] = {AUDIO_DAC_OFF_VALUE}; + +/* keep track of the sample position for for each frequency */ +static float dac_if[AUDIO_MAX_SIMULTANEOUS_TONES] = {0.0}; + +static float active_tones_snapshot[AUDIO_MAX_SIMULTANEOUS_TONES] = {0, 0}; +static uint8_t active_tones_snapshot_length = 0; + +typedef enum { + OUTPUT_SHOULD_START, + OUTPUT_RUN_NORMALLY, + // path 1: wait for zero, then change/update active tones + OUTPUT_TONES_CHANGED, + OUTPUT_REACHED_ZERO_BEFORE_TONE_CHANGE, + // path 2: hardware should stop, wait for zero then turn output off = stop the timer + OUTPUT_SHOULD_STOP, + OUTPUT_REACHED_ZERO_BEFORE_OFF, + OUTPUT_OFF, + OUTPUT_OFF_1, + OUTPUT_OFF_2, // trailing off: giving the DAC two more conversion cycles until the AUDIO_DAC_OFF_VALUE reaches the output, then turn the timer off, which leaves the output at that level + number_of_output_states +} output_states_t; +output_states_t state = OUTPUT_OFF_2; + +/** + * Generation of the waveform being passed to the callback. Declared weak so users + * can override it with their own wave-forms/noises. + */ +__attribute__((weak)) uint16_t dac_value_generate(void) { + // DAC is running/asking for values but snapshot length is zero -> must be playing a pause + if (active_tones_snapshot_length == 0) { + return AUDIO_DAC_OFF_VALUE; + } + + /* doing additive wave synthesis over all currently playing tones = adding up + * sine-wave-samples for each frequency, scaled by the number of active tones + */ + uint16_t value = 0; + float frequency = 0.0f; + + for (uint8_t i = 0; i < active_tones_snapshot_length; i++) { + /* Note: a user implementation does not have to rely on the active_tones_snapshot, but + * could directly query the active frequencies through audio_get_processed_frequency */ + frequency = active_tones_snapshot[i]; + + dac_if[i] = dac_if[i] + ((frequency * AUDIO_DAC_BUFFER_SIZE) / AUDIO_DAC_SAMPLE_RATE) * 2 / 3; + /*Note: the 2/3 are necessary to get the correct frequencies on the + * DAC output (as measured with an oscilloscope), since the gpt + * timer runs with 3*AUDIO_DAC_SAMPLE_RATE; and the DAC callback + * is called twice per conversion.*/ + + dac_if[i] = fmod(dac_if[i], AUDIO_DAC_BUFFER_SIZE); + + // Wavetable generation/lookup + uint16_t dac_i = (uint16_t)dac_if[i]; + +#if defined(AUDIO_DAC_SAMPLE_WAVEFORM_SINE) + value += dac_buffer_sine[dac_i] / active_tones_snapshot_length; +#elif defined(AUDIO_DAC_SAMPLE_WAVEFORM_TRIANGLE) + value += dac_buffer_triangle[dac_i] / active_tones_snapshot_length; +#elif defined(AUDIO_DAC_SAMPLE_WAVEFORM_TRAPEZOID) + value += dac_buffer_trapezoid[dac_i] / active_tones_snapshot_length; +#elif defined(AUDIO_DAC_SAMPLE_WAVEFORM_SQUARE) + value += dac_buffer_square[dac_i] / active_tones_snapshot_length; +#endif + /* + // SINE + value += dac_buffer_sine[dac_i] / active_tones_snapshot_length / 3; + // TRIANGLE + value += dac_buffer_triangle[dac_i] / active_tones_snapshot_length / 3; + // SQUARE + value += dac_buffer_square[dac_i] / active_tones_snapshot_length / 3; + //NOTE: combination of these three wave-forms is more exemplary - and doesn't sound particularly good :-P + */ + + // STAIRS (mostly usefully as test-pattern) + // value_avg = dac_buffer_staircase[dac_i] / active_tones_snapshot_length; + } + + return value; +} + +/** + * DAC streaming callback. Does all of the main computing for playing songs. + * + * Note: chibios calls this CB twice: during the 'half buffer event', and the 'full buffer event'. + */ +static void dac_end(DACDriver *dacp) { + dacsample_t *sample_p = (dacp)->samples; + + // work on the other half of the buffer + if (dacIsBufferComplete(dacp)) { + sample_p += AUDIO_DAC_BUFFER_SIZE / 2; // 'half_index' + } + + for (uint8_t s = 0; s < AUDIO_DAC_BUFFER_SIZE / 2; s++) { + if (OUTPUT_OFF <= state) { + sample_p[s] = AUDIO_DAC_OFF_VALUE; + continue; + } else { + sample_p[s] = dac_value_generate(); + } + + /* zero crossing (or approach, whereas zero == DAC_OFF_VALUE, which can be configured to anything from 0 to DAC_SAMPLE_MAX) + * ============================*=*========================== AUDIO_DAC_SAMPLE_MAX + * * * + * * * + * --------------------------------------------------------- + * * * } AUDIO_DAC_SAMPLE_MAX/100 + * --------------------------------------------------------- AUDIO_DAC_OFF_VALUE + * * * } AUDIO_DAC_SAMPLE_MAX/100 + * --------------------------------------------------------- + * * + * * * + * * * + * =====*=*================================================= 0x0 + */ + if (((sample_p[s] + (AUDIO_DAC_SAMPLE_MAX / 100)) > AUDIO_DAC_OFF_VALUE) && // value approaches from below + (sample_p[s] < (AUDIO_DAC_OFF_VALUE + (AUDIO_DAC_SAMPLE_MAX / 100))) // or above + ) { + if ((OUTPUT_SHOULD_START == state) && (active_tones_snapshot_length > 0)) { + state = OUTPUT_RUN_NORMALLY; + } else if (OUTPUT_TONES_CHANGED == state) { + state = OUTPUT_REACHED_ZERO_BEFORE_TONE_CHANGE; + } else if (OUTPUT_SHOULD_STOP == state) { + state = OUTPUT_REACHED_ZERO_BEFORE_OFF; + } + } + + // still 'ramping up', reset the output to OFF_VALUE until the generated values reach that value, to do a smooth handover + if (OUTPUT_SHOULD_START == state) { + sample_p[s] = AUDIO_DAC_OFF_VALUE; + } + + if ((OUTPUT_SHOULD_START == state) || (OUTPUT_REACHED_ZERO_BEFORE_OFF == state) || (OUTPUT_REACHED_ZERO_BEFORE_TONE_CHANGE == state)) { + uint8_t active_tones = MIN(AUDIO_MAX_SIMULTANEOUS_TONES, audio_get_number_of_active_tones()); + active_tones_snapshot_length = 0; + // update the snapshot - once, and only on occasion that something changed; + // -> saves cpu cycles (?) + for (uint8_t i = 0; i < active_tones; i++) { + float freq = audio_get_processed_frequency(i); + if (freq > 0) { // disregard 'rest' notes, with valid frequency 0.0f; which would only lower the resulting waveform volume during the additive synthesis step + active_tones_snapshot[active_tones_snapshot_length++] = freq; + } + } + + if ((0 == active_tones_snapshot_length) && (OUTPUT_REACHED_ZERO_BEFORE_OFF == state)) { + state = OUTPUT_OFF; + } + if (OUTPUT_REACHED_ZERO_BEFORE_TONE_CHANGE == state) { + state = OUTPUT_RUN_NORMALLY; + } + } + } + + // update audio internal state (note position, current_note, ...) + if (audio_update_state()) { + if (OUTPUT_SHOULD_STOP != state) { + state = OUTPUT_TONES_CHANGED; + } + } + + if (OUTPUT_OFF <= state) { + if (OUTPUT_OFF_2 == state) { + // stopping timer6 = stopping the DAC at whatever value it is currently pushing to the output = AUDIO_DAC_OFF_VALUE + gptStopTimer(&GPTD6); + } else { + state++; + } + } +} + +static void dac_error(DACDriver *dacp, dacerror_t err) { + (void)dacp; + (void)err; + + chSysHalt("DAC failure. halp"); +} + +static const GPTConfig gpt6cfg1 = {.frequency = AUDIO_DAC_SAMPLE_RATE * 3, + .callback = NULL, + .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ + .dier = 0U}; + +static const DACConfig dac_conf = {.init = AUDIO_DAC_OFF_VALUE, .datamode = DAC_DHRM_12BIT_RIGHT}; + +/** + * @note The DAC_TRG(0) here selects the Timer 6 TRGO event, which is triggered + * on the rising edge after 3 APB1 clock cycles, causing our gpt6cfg1.frequency + * to be a third of what we expect. + * + * Here are all the values for DAC_TRG (TSEL in the ref manual) + * TIM15_TRGO 0b011 + * TIM2_TRGO 0b100 + * TIM3_TRGO 0b001 + * TIM6_TRGO 0b000 + * TIM7_TRGO 0b010 + * EXTI9 0b110 + * SWTRIG 0b111 + */ +static const DACConversionGroup dac_conv_cfg = {.num_channels = 1U, .end_cb = dac_end, .error_cb = dac_error, .trigger = DAC_TRG(0b000)}; + +void audio_driver_initialize() { + if ((AUDIO_PIN == A4) || (AUDIO_PIN_ALT == A4)) { + palSetLineMode(A4, PAL_MODE_INPUT_ANALOG); + dacStart(&DACD1, &dac_conf); + } + if ((AUDIO_PIN == A5) || (AUDIO_PIN_ALT == A5)) { + palSetLineMode(A5, PAL_MODE_INPUT_ANALOG); + dacStart(&DACD2, &dac_conf); + } + + /* enable the output buffer, to directly drive external loads with no additional circuitry + * + * see: AN4566 Application note: Extending the DAC performance of STM32 microcontrollers + * Note: Buffer-Off bit -> has to be set 0 to enable the output buffer + * Note: enabling the output buffer imparts an additional dc-offset of a couple mV + * + * this is done here, reaching directly into the stm32 registers since chibios has not implemented BOFF handling yet + * (see: chibios/os/hal/ports/STM32/todo.txt '- BOFF handling in DACv1.' + */ + DACD1.params->dac->CR &= ~DAC_CR_BOFF1; + DACD2.params->dac->CR &= ~DAC_CR_BOFF2; + + if (AUDIO_PIN == A4) { + dacStartConversion(&DACD1, &dac_conv_cfg, dac_buffer_empty, AUDIO_DAC_BUFFER_SIZE); + } else if (AUDIO_PIN == A5) { + dacStartConversion(&DACD2, &dac_conv_cfg, dac_buffer_empty, AUDIO_DAC_BUFFER_SIZE); + } + + // no inverted/out-of-phase waveform (yet?), only pulling AUDIO_PIN_ALT to AUDIO_DAC_OFF_VALUE +#if defined(AUDIO_PIN_ALT_AS_NEGATIVE) + if (AUDIO_PIN_ALT == A4) { + dacPutChannelX(&DACD1, 0, AUDIO_DAC_OFF_VALUE); + } else if (AUDIO_PIN_ALT == A5) { + dacPutChannelX(&DACD2, 0, AUDIO_DAC_OFF_VALUE); + } +#endif + + gptStart(&GPTD6, &gpt6cfg1); +} + +void audio_driver_stop(void) { state = OUTPUT_SHOULD_STOP; } + +void audio_driver_start(void) { + gptStartContinuous(&GPTD6, 2U); + + for (uint8_t i = 0; i < AUDIO_MAX_SIMULTANEOUS_TONES; i++) { + dac_if[i] = 0.0f; + active_tones_snapshot[i] = 0.0f; + } + active_tones_snapshot_length = 0; + state = OUTPUT_SHOULD_START; +} diff --git a/platforms/chibios/drivers/audio_dac_basic.c b/platforms/chibios/drivers/audio_dac_basic.c new file mode 100644 index 0000000000..fac6513506 --- /dev/null +++ b/platforms/chibios/drivers/audio_dac_basic.c @@ -0,0 +1,245 @@ +/* Copyright 2016-2020 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "audio.h" +#include "ch.h" +#include "hal.h" + +/* + Audio Driver: DAC + + which utilizes both channels of the DAC unit many STM32 are equipped with to output a modulated square-wave, from precomputed samples stored in a buffer, which is passed to the hardware through DMA + + this driver can either be used to drive to separate speakers, wired to A4+Gnd and A5+Gnd, which allows two tones to be played simultaneously + OR + one speaker wired to A4+A5 with the AUDIO_PIN_ALT_AS_NEGATIVE define set - see docs/feature_audio + +*/ + +#if !defined(AUDIO_PIN) +# pragma message "Audio feature enabled, but no suitable pin selected as AUDIO_PIN - see docs/feature_audio under 'ARM (DAC basic)' for available options." +// TODO: make this an 'error' instead; go through a breaking change, and add AUDIO_PIN A5 to all keyboards currently using AUDIO on STM32 based boards? - for now: set the define here +# define AUDIO_PIN A5 +#endif +// check configuration for ONE speaker, connected to both DAC pins +#if defined(AUDIO_PIN_ALT_AS_NEGATIVE) && !defined(AUDIO_PIN_ALT) +# error "Audio feature: AUDIO_PIN_ALT_AS_NEGATIVE set, but no pin configured as AUDIO_PIN_ALT" +#endif + +#ifndef AUDIO_PIN_ALT +// no ALT pin defined is valid, but the c-ifs below need some value set +# define AUDIO_PIN_ALT -1 +#endif + +#if !defined(AUDIO_STATE_TIMER) +# define AUDIO_STATE_TIMER GPTD8 +#endif + +// square-wave +static const dacsample_t dac_buffer_1[AUDIO_DAC_BUFFER_SIZE] = { + // First half is max, second half is 0 + [0 ... AUDIO_DAC_BUFFER_SIZE / 2 - 1] = AUDIO_DAC_SAMPLE_MAX, + [AUDIO_DAC_BUFFER_SIZE / 2 ... AUDIO_DAC_BUFFER_SIZE - 1] = 0, +}; + +// square-wave +static const dacsample_t dac_buffer_2[AUDIO_DAC_BUFFER_SIZE] = { + // opposite of dac_buffer above + [0 ... AUDIO_DAC_BUFFER_SIZE / 2 - 1] = 0, + [AUDIO_DAC_BUFFER_SIZE / 2 ... AUDIO_DAC_BUFFER_SIZE - 1] = AUDIO_DAC_SAMPLE_MAX, +}; + +GPTConfig gpt6cfg1 = {.frequency = AUDIO_DAC_SAMPLE_RATE, + .callback = NULL, + .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ + .dier = 0U}; +GPTConfig gpt7cfg1 = {.frequency = AUDIO_DAC_SAMPLE_RATE, + .callback = NULL, + .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ + .dier = 0U}; + +static void gpt_audio_state_cb(GPTDriver *gptp); +GPTConfig gptStateUpdateCfg = {.frequency = 10, + .callback = gpt_audio_state_cb, + .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */ + .dier = 0U}; + +static const DACConfig dac_conf_ch1 = {.init = AUDIO_DAC_OFF_VALUE, .datamode = DAC_DHRM_12BIT_RIGHT}; +static const DACConfig dac_conf_ch2 = {.init = AUDIO_DAC_OFF_VALUE, .datamode = DAC_DHRM_12BIT_RIGHT}; + +/** + * @note The DAC_TRG(0) here selects the Timer 6 TRGO event, which is triggered + * on the rising edge after 3 APB1 clock cycles, causing our gpt6cfg1.frequency + * to be a third of what we expect. + * + * Here are all the values for DAC_TRG (TSEL in the ref manual) + * TIM15_TRGO 0b011 + * TIM2_TRGO 0b100 + * TIM3_TRGO 0b001 + * TIM6_TRGO 0b000 + * TIM7_TRGO 0b010 + * EXTI9 0b110 + * SWTRIG 0b111 + */ +static const DACConversionGroup dac_conv_grp_ch1 = {.num_channels = 1U, .trigger = DAC_TRG(0b000)}; +static const DACConversionGroup dac_conv_grp_ch2 = {.num_channels = 1U, .trigger = DAC_TRG(0b010)}; + +void channel_1_start(void) { + gptStart(&GPTD6, &gpt6cfg1); + gptStartContinuous(&GPTD6, 2U); + palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG); +} + +void channel_1_stop(void) { + gptStopTimer(&GPTD6); + palSetPadMode(GPIOA, 4, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(GPIOA, 4); +} + +static float channel_1_frequency = 0.0f; +void channel_1_set_frequency(float freq) { + channel_1_frequency = freq; + + channel_1_stop(); + if (freq <= 0.0) // a pause/rest has freq=0 + return; + + gpt6cfg1.frequency = 2 * freq * AUDIO_DAC_BUFFER_SIZE; + channel_1_start(); +} +float channel_1_get_frequency(void) { return channel_1_frequency; } + +void channel_2_start(void) { + gptStart(&GPTD7, &gpt7cfg1); + gptStartContinuous(&GPTD7, 2U); + palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG); +} + +void channel_2_stop(void) { + gptStopTimer(&GPTD7); + palSetPadMode(GPIOA, 5, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(GPIOA, 5); +} + +static float channel_2_frequency = 0.0f; +void channel_2_set_frequency(float freq) { + channel_2_frequency = freq; + + channel_2_stop(); + if (freq <= 0.0) // a pause/rest has freq=0 + return; + + gpt7cfg1.frequency = 2 * freq * AUDIO_DAC_BUFFER_SIZE; + channel_2_start(); +} +float channel_2_get_frequency(void) { return channel_2_frequency; } + +static void gpt_audio_state_cb(GPTDriver *gptp) { + if (audio_update_state()) { +#if defined(AUDIO_PIN_ALT_AS_NEGATIVE) + // one piezo/speaker connected to both audio pins, the generated square-waves are inverted + channel_1_set_frequency(audio_get_processed_frequency(0)); + channel_2_set_frequency(audio_get_processed_frequency(0)); + +#else // two separate audio outputs/speakers + // primary speaker on A4, optional secondary on A5 + if (AUDIO_PIN == A4) { + channel_1_set_frequency(audio_get_processed_frequency(0)); + if (AUDIO_PIN_ALT == A5) { + if (audio_get_number_of_active_tones() > 1) { + channel_2_set_frequency(audio_get_processed_frequency(1)); + } else { + channel_2_stop(); + } + } + } + + // primary speaker on A5, optional secondary on A4 + if (AUDIO_PIN == A5) { + channel_2_set_frequency(audio_get_processed_frequency(0)); + if (AUDIO_PIN_ALT == A4) { + if (audio_get_number_of_active_tones() > 1) { + channel_1_set_frequency(audio_get_processed_frequency(1)); + } else { + channel_1_stop(); + } + } + } +#endif + } +} + +void audio_driver_initialize() { + if ((AUDIO_PIN == A4) || (AUDIO_PIN_ALT == A4)) { + palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_ANALOG); + dacStart(&DACD1, &dac_conf_ch1); + + // initial setup of the dac-triggering timer is still required, even + // though it gets reconfigured and restarted later on + gptStart(&GPTD6, &gpt6cfg1); + } + + if ((AUDIO_PIN == A5) || (AUDIO_PIN_ALT == A5)) { + palSetPadMode(GPIOA, 5, PAL_MODE_INPUT_ANALOG); + dacStart(&DACD2, &dac_conf_ch2); + + gptStart(&GPTD7, &gpt7cfg1); + } + + /* enable the output buffer, to directly drive external loads with no additional circuitry + * + * see: AN4566 Application note: Extending the DAC performance of STM32 microcontrollers + * Note: Buffer-Off bit -> has to be set 0 to enable the output buffer + * Note: enabling the output buffer imparts an additional dc-offset of a couple mV + * + * this is done here, reaching directly into the stm32 registers since chibios has not implemented BOFF handling yet + * (see: chibios/os/hal/ports/STM32/todo.txt '- BOFF handling in DACv1.' + */ + DACD1.params->dac->CR &= ~DAC_CR_BOFF1; + DACD2.params->dac->CR &= ~DAC_CR_BOFF2; + + // start state-updater + gptStart(&AUDIO_STATE_TIMER, &gptStateUpdateCfg); +} + +void audio_driver_stop(void) { + if ((AUDIO_PIN == A4) || (AUDIO_PIN_ALT == A4)) { + gptStopTimer(&GPTD6); + + // stop the ongoing conversion and put the output in a known state + dacStopConversion(&DACD1); + dacPutChannelX(&DACD1, 0, AUDIO_DAC_OFF_VALUE); + } + + if ((AUDIO_PIN == A5) || (AUDIO_PIN_ALT == A5)) { + gptStopTimer(&GPTD7); + + dacStopConversion(&DACD2); + dacPutChannelX(&DACD2, 0, AUDIO_DAC_OFF_VALUE); + } + gptStopTimer(&AUDIO_STATE_TIMER); +} + +void audio_driver_start(void) { + if ((AUDIO_PIN == A4) || (AUDIO_PIN_ALT == A4)) { + dacStartConversion(&DACD1, &dac_conv_grp_ch1, (dacsample_t *)dac_buffer_1, AUDIO_DAC_BUFFER_SIZE); + } + if ((AUDIO_PIN == A5) || (AUDIO_PIN_ALT == A5)) { + dacStartConversion(&DACD2, &dac_conv_grp_ch2, (dacsample_t *)dac_buffer_2, AUDIO_DAC_BUFFER_SIZE); + } + gptStartContinuous(&AUDIO_STATE_TIMER, 2U); +} diff --git a/platforms/chibios/drivers/audio_pwm.h b/platforms/chibios/drivers/audio_pwm.h new file mode 100644 index 0000000000..86cab916e1 --- /dev/null +++ b/platforms/chibios/drivers/audio_pwm.h @@ -0,0 +1,40 @@ +/* Copyright 2020 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#if !defined(AUDIO_PWM_DRIVER) +// NOTE: Timer2 seems to be used otherwise in QMK, otherwise we could default to A5 (= TIM2_CH1, with PWMD2 and alternate-function(1)) +# define AUDIO_PWM_DRIVER PWMD1 +#endif + +#if !defined(AUDIO_PWM_CHANNEL) +// NOTE: sticking to the STM data-sheet numbering: TIMxCH1 to TIMxCH4 +// default: STM32F303CC PA8+TIM1_CH1 -> 1 +# define AUDIO_PWM_CHANNEL 1 +#endif + +#if !defined(AUDIO_PWM_PAL_MODE) +// pin-alternate function: see the data-sheet for which pin needs what AF to connect to TIMx_CHy +// default: STM32F303CC PA8+TIM1_CH1 -> 6 +# define AUDIO_PWM_PAL_MODE 6 +#endif + +#if !defined(AUDIO_STATE_TIMER) +// timer used to trigger updates in the audio-system, configured/enabled in chibios mcuconf. +// Tim6 is the default for "larger" STMs, smaller ones might not have this one (enabled) and need to switch to a different one (e.g.: STM32F103 has only Tim1-Tim4) +# define AUDIO_STATE_TIMER GPTD6 +#endif diff --git a/platforms/chibios/drivers/audio_pwm_hardware.c b/platforms/chibios/drivers/audio_pwm_hardware.c new file mode 100644 index 0000000000..cd40019ee7 --- /dev/null +++ b/platforms/chibios/drivers/audio_pwm_hardware.c @@ -0,0 +1,144 @@ +/* Copyright 2020 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* +Audio Driver: PWM + +the duty-cycle is always kept at 50%, and the pwm-period is adjusted to match the frequency of a note to be played back. + +this driver uses the chibios-PWM system to produce a square-wave on specific output pins that are connected to the PWM hardware. +The hardware directly toggles the pin via its alternate function. see your MCUs data-sheet for which pin can be driven by what timer - looking for TIMx_CHy and the corresponding alternate function. + + */ + +#include "audio.h" +#include "ch.h" +#include "hal.h" + +#if !defined(AUDIO_PIN) +# error "Audio feature enabled, but no pin selected - see docs/feature_audio under the ARM PWM settings" +#endif + +extern bool playing_note; +extern bool playing_melody; +extern uint8_t note_timbre; + +static PWMConfig pwmCFG = { + .frequency = 100000, /* PWM clock frequency */ + // CHIBIOS-BUG? can't set the initial period to <2, or the pwm (hard or software) takes ~130ms with .frequency=500000 for a pwmChangePeriod to take effect; with no output=silence in the meantime + .period = 2, /* initial PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ + .callback = NULL, /* no callback, the hardware directly toggles the pin */ + .channels = + { +#if AUDIO_PWM_CHANNEL == 4 + {PWM_OUTPUT_DISABLED, NULL}, /* channel 0 -> TIMx_CH1 */ + {PWM_OUTPUT_DISABLED, NULL}, /* channel 1 -> TIMx_CH2 */ + {PWM_OUTPUT_DISABLED, NULL}, /* channel 2 -> TIMx_CH3 */ + {PWM_OUTPUT_ACTIVE_HIGH, NULL} /* channel 3 -> TIMx_CH4 */ +#elif AUDIO_PWM_CHANNEL == 3 + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* TIMx_CH3 */ + {PWM_OUTPUT_DISABLED, NULL} +#elif AUDIO_PWM_CHANNEL == 2 + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* TIMx_CH2 */ + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} +#else /*fallback to CH1 */ + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* TIMx_CH1 */ + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} +#endif + }, +}; + +static float channel_1_frequency = 0.0f; +void channel_1_set_frequency(float freq) { + channel_1_frequency = freq; + + if (freq <= 0.0) // a pause/rest has freq=0 + return; + + pwmcnt_t period = (pwmCFG.frequency / freq); + pwmChangePeriod(&AUDIO_PWM_DRIVER, period); + pwmEnableChannel(&AUDIO_PWM_DRIVER, AUDIO_PWM_CHANNEL - 1, + // adjust the duty-cycle so that the output is for 'note_timbre' duration HIGH + PWM_PERCENTAGE_TO_WIDTH(&AUDIO_PWM_DRIVER, (100 - note_timbre) * 100)); +} + +float channel_1_get_frequency(void) { return channel_1_frequency; } + +void channel_1_start(void) { + pwmStop(&AUDIO_PWM_DRIVER); + pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG); +} + +void channel_1_stop(void) { pwmStop(&AUDIO_PWM_DRIVER); } + +static void gpt_callback(GPTDriver *gptp); +GPTConfig gptCFG = { + /* a whole note is one beat, which is - per definition in musical_notes.h - set to 64 + the longest note is BREAVE_DOT=128+64=192, the shortest SIXTEENTH=4 + the tempo (which might vary!) is in bpm (beats per minute) + therefore: if the timer ticks away at .frequency = (60*64)Hz, + and the .interval counts from 64 downwards - audio_update_state is + called just often enough to not miss any notes + */ + .frequency = 60 * 64, + .callback = gpt_callback, +}; + +void audio_driver_initialize(void) { + pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG); + + // connect the AUDIO_PIN to the PWM hardware +#if defined(USE_GPIOV1) // STM32F103C8 + palSetLineMode(AUDIO_PIN, PAL_MODE_ALTERNATE_PUSHPULL); +#else // GPIOv2 (or GPIOv3 for f4xx, which is the same/compatible at this command) + palSetLineMode(AUDIO_PIN, PAL_MODE_ALTERNATE(AUDIO_PWM_PAL_MODE)); +#endif + + gptStart(&AUDIO_STATE_TIMER, &gptCFG); +} + +void audio_driver_start(void) { + channel_1_stop(); + channel_1_start(); + + if (playing_note || playing_melody) { + gptStartContinuous(&AUDIO_STATE_TIMER, 64); + } +} + +void audio_driver_stop(void) { + channel_1_stop(); + gptStopTimer(&AUDIO_STATE_TIMER); +} + +/* a regular timer task, that checks the note to be currently played + * and updates the pwm to output that frequency + */ +static void gpt_callback(GPTDriver *gptp) { + float freq; // TODO: freq_alt + + if (audio_update_state()) { + freq = audio_get_processed_frequency(0); // freq_alt would be index=1 + channel_1_set_frequency(freq); + } +} diff --git a/platforms/chibios/drivers/audio_pwm_software.c b/platforms/chibios/drivers/audio_pwm_software.c new file mode 100644 index 0000000000..15c3e98b6a --- /dev/null +++ b/platforms/chibios/drivers/audio_pwm_software.c @@ -0,0 +1,164 @@ +/* Copyright 2020 Jack Humbert + * Copyright 2020 JohSchneider + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* +Audio Driver: PWM + +the duty-cycle is always kept at 50%, and the pwm-period is adjusted to match the frequency of a note to be played back. + +this driver uses the chibios-PWM system to produce a square-wave on any given output pin in software +- a pwm callback is used to set/clear the configured pin. + + */ +#include "audio.h" +#include "ch.h" +#include "hal.h" + +#if !defined(AUDIO_PIN) +# error "Audio feature enabled, but no pin selected - see docs/feature_audio under the ARM PWM settings" +#endif +extern bool playing_note; +extern bool playing_melody; +extern uint8_t note_timbre; + +static void pwm_audio_period_callback(PWMDriver *pwmp); +static void pwm_audio_channel_interrupt_callback(PWMDriver *pwmp); + +static PWMConfig pwmCFG = { + .frequency = 100000, /* PWM clock frequency */ + // CHIBIOS-BUG? can't set the initial period to <2, or the pwm (hard or software) takes ~130ms with .frequency=500000 for a pwmChangePeriod to take effect; with no output=silence in the meantime + .period = 2, /* initial PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ + .callback = pwm_audio_period_callback, + .channels = + { + // software-PWM just needs another callback on any channel + {PWM_OUTPUT_ACTIVE_HIGH, pwm_audio_channel_interrupt_callback}, /* channel 0 -> TIMx_CH1 */ + {PWM_OUTPUT_DISABLED, NULL}, /* channel 1 -> TIMx_CH2 */ + {PWM_OUTPUT_DISABLED, NULL}, /* channel 2 -> TIMx_CH3 */ + {PWM_OUTPUT_DISABLED, NULL} /* channel 3 -> TIMx_CH4 */ + }, +}; + +static float channel_1_frequency = 0.0f; +void channel_1_set_frequency(float freq) { + channel_1_frequency = freq; + + if (freq <= 0.0) // a pause/rest has freq=0 + return; + + pwmcnt_t period = (pwmCFG.frequency / freq); + pwmChangePeriod(&AUDIO_PWM_DRIVER, period); + + pwmEnableChannel(&AUDIO_PWM_DRIVER, AUDIO_PWM_CHANNEL - 1, + // adjust the duty-cycle so that the output is for 'note_timbre' duration HIGH + PWM_PERCENTAGE_TO_WIDTH(&AUDIO_PWM_DRIVER, (100 - note_timbre) * 100)); +} + +float channel_1_get_frequency(void) { return channel_1_frequency; } + +void channel_1_start(void) { + pwmStop(&AUDIO_PWM_DRIVER); + pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG); + + pwmEnablePeriodicNotification(&AUDIO_PWM_DRIVER); + pwmEnableChannelNotification(&AUDIO_PWM_DRIVER, AUDIO_PWM_CHANNEL - 1); +} + +void channel_1_stop(void) { + pwmStop(&AUDIO_PWM_DRIVER); + + palClearLine(AUDIO_PIN); // leave the line low, after last note was played + +#if defined(AUDIO_PIN_ALT) && defined(AUDIO_PIN_ALT_AS_NEGATIVE) + palClearLine(AUDIO_PIN_ALT); // leave the line low, after last note was played +#endif +} + +// generate a PWM signal on any pin, not necessarily the one connected to the timer +static void pwm_audio_period_callback(PWMDriver *pwmp) { + (void)pwmp; + palClearLine(AUDIO_PIN); + +#if defined(AUDIO_PIN_ALT) && defined(AUDIO_PIN_ALT_AS_NEGATIVE) + palSetLine(AUDIO_PIN_ALT); +#endif +} +static void pwm_audio_channel_interrupt_callback(PWMDriver *pwmp) { + (void)pwmp; + if (channel_1_frequency > 0) { + palSetLine(AUDIO_PIN); // generate a PWM signal on any pin, not necessarily the one connected to the timer +#if defined(AUDIO_PIN_ALT) && defined(AUDIO_PIN_ALT_AS_NEGATIVE) + palClearLine(AUDIO_PIN_ALT); +#endif + } +} + +static void gpt_callback(GPTDriver *gptp); +GPTConfig gptCFG = { + /* a whole note is one beat, which is - per definition in musical_notes.h - set to 64 + the longest note is BREAVE_DOT=128+64=192, the shortest SIXTEENTH=4 + the tempo (which might vary!) is in bpm (beats per minute) + therefore: if the timer ticks away at .frequency = (60*64)Hz, + and the .interval counts from 64 downwards - audio_update_state is + called just often enough to not miss anything + */ + .frequency = 60 * 64, + .callback = gpt_callback, +}; + +void audio_driver_initialize(void) { + pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG); + + palSetLineMode(AUDIO_PIN, PAL_MODE_OUTPUT_PUSHPULL); + palClearLine(AUDIO_PIN); + +#if defined(AUDIO_PIN_ALT) && defined(AUDIO_PIN_ALT_AS_NEGATIVE) + palSetLineMode(AUDIO_PIN_ALT, PAL_MODE_OUTPUT_PUSHPULL); + palClearLine(AUDIO_PIN_ALT); +#endif + + pwmEnablePeriodicNotification(&AUDIO_PWM_DRIVER); // enable pwm callbacks + pwmEnableChannelNotification(&AUDIO_PWM_DRIVER, AUDIO_PWM_CHANNEL - 1); + + gptStart(&AUDIO_STATE_TIMER, &gptCFG); +} + +void audio_driver_start(void) { + channel_1_stop(); + channel_1_start(); + + if (playing_note || playing_melody) { + gptStartContinuous(&AUDIO_STATE_TIMER, 64); + } +} + +void audio_driver_stop(void) { + channel_1_stop(); + gptStopTimer(&AUDIO_STATE_TIMER); +} + +/* a regular timer task, that checks the note to be currently played + * and updates the pwm to output that frequency + */ +static void gpt_callback(GPTDriver *gptp) { + float freq; // TODO: freq_alt + + if (audio_update_state()) { + freq = audio_get_processed_frequency(0); // freq_alt would be index=1 + channel_1_set_frequency(freq); + } +} diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c index fc4bb2ab37..63e85ae87d 100644 --- a/platforms/chibios/drivers/i2c_master.c +++ b/platforms/chibios/drivers/i2c_master.c @@ -63,16 +63,16 @@ __attribute__((weak)) void i2c_init(void) { is_initialised = true; // Try releasing special pins for a short time - palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT); - palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT); + palSetLineMode(I2C1_SCL_PIN, PAL_MODE_INPUT); + palSetLineMode(I2C1_SDA_PIN, PAL_MODE_INPUT); chThdSleepMilliseconds(10); #if defined(USE_GPIOV1) - palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, I2C1_SCL_PAL_MODE); - palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, I2C1_SDA_PAL_MODE); + palSetLineMode(I2C1_SCL_PIN, I2C1_SCL_PAL_MODE); + palSetLineMode(I2C1_SDA_PIN, I2C1_SDA_PAL_MODE); #else - palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); - palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); + palSetLineMode(I2C1_SCL_PIN, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN); + palSetLineMode(I2C1_SDA_PIN, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN); #endif } } @@ -102,7 +102,7 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, i2cStart(&I2C_DRIVER, &i2cconfig); uint8_t complete_packet[length + 1]; - for (uint8_t i = 0; i < length; i++) { + for (uint16_t i = 0; i < length; i++) { complete_packet[i + 1] = data[i]; } complete_packet[0] = regaddr; @@ -111,6 +111,21 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, return chibios_to_qmk(&status); } +i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_address = devaddr; + i2cStart(&I2C_DRIVER, &i2cconfig); + + uint8_t complete_packet[length + 2]; + for (uint16_t i = 0; i < length; i++) { + complete_packet[i + 2] = data[i]; + } + complete_packet[0] = regaddr >> 8; + complete_packet[1] = regaddr & 0xFF; + + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 2, 0, 0, TIME_MS2I(timeout)); + return chibios_to_qmk(&status); +} + i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); @@ -118,4 +133,12 @@ i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16 return chibios_to_qmk(&status); } +i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_address = devaddr; + i2cStart(&I2C_DRIVER, &i2cconfig); + uint8_t register_packet[2] = {regaddr >> 8, regaddr & 0xFF}; + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), register_packet, 2, data, length, TIME_MS2I(timeout)); + return chibios_to_qmk(&status); +} + void i2c_stop(void) { i2cStop(&I2C_DRIVER); } diff --git a/platforms/chibios/drivers/i2c_master.h b/platforms/chibios/drivers/i2c_master.h index c68109acbd..5f082e9d1e 100644 --- a/platforms/chibios/drivers/i2c_master.h +++ b/platforms/chibios/drivers/i2c_master.h @@ -27,24 +27,11 @@ #include <ch.h> #include <hal.h> -#ifdef I2C1_BANK -# define I2C1_SCL_BANK I2C1_BANK -# define I2C1_SDA_BANK I2C1_BANK +#ifndef I2C1_SCL_PIN +# define I2C1_SCL_PIN B6 #endif - -#ifndef I2C1_SCL_BANK -# define I2C1_SCL_BANK GPIOB -#endif - -#ifndef I2C1_SDA_BANK -# define I2C1_SDA_BANK GPIOB -#endif - -#ifndef I2C1_SCL -# define I2C1_SCL 6 -#endif -#ifndef I2C1_SDA -# define I2C1_SDA 7 +#ifndef I2C1_SDA_PIN +# define I2C1_SDA_PIN B7 #endif #ifdef USE_I2CV1 @@ -83,10 +70,10 @@ #ifdef USE_GPIOV1 # ifndef I2C1_SCL_PAL_MODE -# define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN +# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN # endif # ifndef I2C1_SDA_PAL_MODE -# define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN +# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN # endif #else // The default PAL alternate modes are used to signal that the pins are used for I2C @@ -109,5 +96,7 @@ i2c_status_t i2c_start(uint8_t address); i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); void i2c_stop(void); diff --git a/platforms/chibios/drivers/serial.c b/platforms/chibios/drivers/serial.c index f54fbcee4e..ef6f0aa8d5 100644 --- a/platforms/chibios/drivers/serial.c +++ b/platforms/chibios/drivers/serial.c @@ -19,7 +19,7 @@ # error "chSysPolledDelayX method not supported on this platform" #else # undef wait_us -# define wait_us(x) chSysPolledDelayX(US2RTC(STM32_SYSCLK, x)) +# define wait_us(x) chSysPolledDelayX(US2RTC(CPU_CLOCK, x)) #endif #ifndef SELECT_SOFT_SERIAL_SPEED diff --git a/platforms/chibios/drivers/serial_usart.c b/platforms/chibios/drivers/serial_usart.c index ea4473791c..124e4be685 100644 --- a/platforms/chibios/drivers/serial_usart.c +++ b/platforms/chibios/drivers/serial_usart.c @@ -104,9 +104,9 @@ static inline bool receive(uint8_t* destination, const size_t size) { __attribute__((weak)) void usart_init(void) { # if defined(MCU_STM32) # if defined(USE_GPIOV1) - palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); + palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE_OPENDRAIN); # else - palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); + palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN); # endif # if defined(USART_REMAP) @@ -125,11 +125,11 @@ __attribute__((weak)) void usart_init(void) { __attribute__((weak)) void usart_init(void) { # if defined(MCU_STM32) # if defined(USE_GPIOV1) - palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_STM32_ALTERNATE_PUSHPULL); + palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE_PUSHPULL); palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_INPUT); # else - palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); - palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_RX_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); + palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); + palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_RX_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); # endif # if defined(USART_REMAP) diff --git a/platforms/chibios/drivers/spi_master.c b/platforms/chibios/drivers/spi_master.c index 28ddcbb2ba..f98db6db97 100644 --- a/platforms/chibios/drivers/spi_master.c +++ b/platforms/chibios/drivers/spi_master.c @@ -42,9 +42,9 @@ __attribute__((weak)) void spi_init(void) { palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), SPI_MOSI_PAL_MODE); palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), SPI_MISO_PAL_MODE); #else - palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); - palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); - palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); + palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); + palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); + palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); #endif } } diff --git a/platforms/chibios/drivers/spi_master.h b/platforms/chibios/drivers/spi_master.h index b5a6ef1437..6a3ce481f1 100644 --- a/platforms/chibios/drivers/spi_master.h +++ b/platforms/chibios/drivers/spi_master.h @@ -33,7 +33,7 @@ #ifndef SPI_SCK_PAL_MODE # if defined(USE_GPIOV1) -# define SPI_SCK_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL +# define SPI_SCK_PAL_MODE PAL_MODE_ALTERNATE_PUSHPULL # else # define SPI_SCK_PAL_MODE 5 # endif @@ -45,7 +45,7 @@ #ifndef SPI_MOSI_PAL_MODE # if defined(USE_GPIOV1) -# define SPI_MOSI_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL +# define SPI_MOSI_PAL_MODE PAL_MODE_ALTERNATE_PUSHPULL # else # define SPI_MOSI_PAL_MODE 5 # endif @@ -57,7 +57,7 @@ #ifndef SPI_MISO_PAL_MODE # if defined(USE_GPIOV1) -# define SPI_MISO_PAL_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL +# define SPI_MISO_PAL_MODE PAL_MODE_ALTERNATE_PUSHPULL # else # define SPI_MISO_PAL_MODE 5 # endif diff --git a/platforms/chibios/drivers/uart.c b/platforms/chibios/drivers/uart.c index 030335b342..0e8e0515af 100644 --- a/platforms/chibios/drivers/uart.c +++ b/platforms/chibios/drivers/uart.c @@ -29,11 +29,11 @@ void uart_init(uint32_t baud) { serialConfig.speed = baud; #if defined(USE_GPIOV1) - palSetLineMode(SD1_TX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); - palSetLineMode(SD1_RX_PIN, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); + palSetLineMode(SD1_TX_PIN, PAL_MODE_ALTERNATE_OPENDRAIN); + palSetLineMode(SD1_RX_PIN, PAL_MODE_ALTERNATE_OPENDRAIN); #else - palSetLineMode(SD1_TX_PIN, PAL_MODE_ALTERNATE(SD1_TX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); - palSetLineMode(SD1_RX_PIN, PAL_MODE_ALTERNATE(SD1_RX_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); + palSetLineMode(SD1_TX_PIN, PAL_MODE_ALTERNATE(SD1_TX_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN); + palSetLineMode(SD1_RX_PIN, PAL_MODE_ALTERNATE(SD1_RX_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN); #endif sdStart(&SERIAL_DRIVER, &serialConfig); } diff --git a/platforms/chibios/drivers/ws2812.c b/platforms/chibios/drivers/ws2812.c index 0d12e2fb79..ffcdcff242 100644 --- a/platforms/chibios/drivers/ws2812.c +++ b/platforms/chibios/drivers/ws2812.c @@ -23,7 +23,7 @@ #endif #define NUMBER_NOPS 6 -#define CYCLES_PER_SEC (STM32_SYSCLK / NUMBER_NOPS * NOP_FUDGE) +#define CYCLES_PER_SEC (CPU_CLOCK / NUMBER_NOPS * NOP_FUDGE) #define NS_PER_SEC (1000000000L) // Note that this has to be SIGNED since we want to be able to check for negative values of derivatives #define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC) #define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE) diff --git a/platforms/chibios/drivers/ws2812_pwm.c b/platforms/chibios/drivers/ws2812_pwm.c index e6af55b6b3..c17b9cd4e5 100644 --- a/platforms/chibios/drivers/ws2812_pwm.c +++ b/platforms/chibios/drivers/ws2812_pwm.c @@ -5,7 +5,9 @@ /* Adapted from https://github.com/joewa/WS2812-LED-Driver_ChibiOS/ */ #ifdef RGBW -# error "RGBW not supported" +# define WS2812_CHANNELS 4 +#else +# define WS2812_CHANNELS 3 #endif #ifndef WS2812_PWM_DRIVER @@ -40,15 +42,15 @@ // Default Push Pull #ifndef WS2812_EXTERNAL_PULLUP # if defined(USE_GPIOV1) -# define WS2812_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL +# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE_PUSHPULL # else -# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST | PAL_STM32_PUPDR_FLOATING +# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST | PAL_PUPDR_FLOATING # endif #else # if defined(USE_GPIOV1) -# define WS2812_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN +# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE_OPENDRAIN # else -# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_OSPEED_HIGHEST | PAL_STM32_PUPDR_FLOATING +# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN | PAL_OUTPUT_SPEED_HIGHEST | PAL_PUPDR_FLOATING # endif #endif @@ -59,7 +61,7 @@ /* --- PRIVATE CONSTANTS ---------------------------------------------------- */ -#define WS2812_PWM_FREQUENCY (STM32_SYSCLK / 2) /**< Clock frequency of PWM, must be valid with respect to system clock! */ +#define WS2812_PWM_FREQUENCY (CPU_CLOCK / 2) /**< Clock frequency of PWM, must be valid with respect to system clock! */ #define WS2812_PWM_PERIOD (WS2812_PWM_FREQUENCY / WS2812_PWM_TARGET_PERIOD) /**< Clock period in ticks. 1 / 800kHz = 1.25 uS (as per datasheet) */ /** @@ -68,8 +70,9 @@ * The reset period for each frame is defined in WS2812_TRST_US. * Calculate the number of zeroes to add at the end assuming 1.25 uS/bit: */ +#define WS2812_COLOR_BITS (WS2812_CHANNELS * 8) #define WS2812_RESET_BIT_N (1000 * WS2812_TRST_US / 1250) -#define WS2812_COLOR_BIT_N (RGBLED_NUM * 24) /**< Number of data bits */ +#define WS2812_COLOR_BIT_N (RGBLED_NUM * WS2812_COLOR_BITS) /**< Number of data bits */ #define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */ /** @@ -114,7 +117,7 @@ * * @return The bit index */ -#define WS2812_BIT(led, byte, bit) (24 * (led) + 8 * (byte) + (7 - (bit))) +#define WS2812_BIT(led, byte, bit) (WS2812_COLOR_BITS * (led) + 8 * (byte) + (7 - (bit))) #if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB) /** @@ -228,6 +231,20 @@ # define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 0, (bit)) #endif +#ifdef RGBW +/** + * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given white bit + * + * @note The white byte is the last byte in the color packet + * + * @param[in] led: The led index [0, @ref WS2812_LED_N) + * @param[in] bit: The bit index [0, 7] + * + * @return The bit index + */ +# define WS2812_WHITE_BIT(led, bit) WS2812_BIT((led), 3, (bit)) +#endif + /* --- PRIVATE VARIABLES ---------------------------------------------------- */ static uint32_t ws2812_frame_buffer[WS2812_BIT_N + 1]; /**< Buffer for a frame */ @@ -296,6 +313,17 @@ void ws2812_write_led(uint16_t led_number, uint8_t r, uint8_t g, uint8_t b) { ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)] = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; } } +void ws2812_write_led_rgbw(uint16_t led_number, uint8_t r, uint8_t g, uint8_t b, uint8_t w) { + // Write color to frame buffer + for (uint8_t bit = 0; bit < 8; bit++) { + ws2812_frame_buffer[WS2812_RED_BIT(led_number, bit)] = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; + ws2812_frame_buffer[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; + ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)] = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; +#ifdef RGBW + ws2812_frame_buffer[WS2812_WHITE_BIT(led_number, bit)] = ((w >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; +#endif + } +} // Setleds for standard RGB void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) { @@ -306,6 +334,10 @@ void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) { } for (uint16_t i = 0; i < leds; i++) { +#ifdef RGBW + ws2812_write_led_rgbw(i, ledarray[i].r, ledarray[i].g, ledarray[i].b, ledarray[i].w); +#else ws2812_write_led(i, ledarray[i].r, ledarray[i].g, ledarray[i].b); +#endif } } diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c index fe14b478ab..62722f466e 100644 --- a/platforms/chibios/drivers/ws2812_spi.c +++ b/platforms/chibios/drivers/ws2812_spi.c @@ -3,10 +3,6 @@ /* Adapted from https://github.com/gamazeps/ws2812b-chibios-SPIDMA/ */ -#ifdef RGBW -# error "RGBW not supported" -#endif - // Define the spi your LEDs are plugged to here #ifndef WS2812_SPI # define WS2812_SPI SPID1 @@ -24,15 +20,15 @@ // Default Push Pull #ifndef WS2812_EXTERNAL_PULLUP # if defined(USE_GPIOV1) -# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL +# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE_PUSHPULL # else -# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL +# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL # endif #else # if defined(USE_GPIOV1) -# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN +# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE_OPENDRAIN # else -# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN +# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN # endif #endif @@ -68,14 +64,18 @@ #endif #if defined(USE_GPIOV1) -# define WS2812_SCK_OUTPUT_MODE PAL_MODE_STM32_ALTERNATE_PUSHPULL +# define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE_PUSHPULL #else -# define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL +# define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_SCK_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL #endif #define BYTES_FOR_LED_BYTE 4 -#define NB_COLORS 3 -#define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * NB_COLORS) +#ifdef RGBW +# define WS2812_CHANNELS 4 +#else +# define WS2812_CHANNELS 3 +#endif +#define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * WS2812_CHANNELS) #define DATA_SIZE (BYTES_FOR_LED * RGBLED_NUM) #define RESET_SIZE (1000 * WS2812_TRST_US / (2 * 1250)) #define PREAMBLE_SIZE 4 @@ -116,6 +116,9 @@ static void set_led_color_rgb(LED_TYPE color, int pos) { for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j); for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.r, j); #endif +#ifdef RGBW + for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 4 + j] = get_protocol_eq(color.w, j); +#endif } void ws2812_init(void) { |