1 files changed, 265 insertions, 0 deletions
diff --git a/quantum/serial_link/system/serial_link.c b/quantum/serial_link/system/serial_link.c
new file mode 100644
index 0000000000..75c7e77a76
--- /dev/null
+++ b/quantum/serial_link/system/serial_link.c
@@ -0,0 +1,265 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2016 Fred Sundvik
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+*/
+#include "report.h"
+#include "host_driver.h"
+#include "serial_link/system/serial_link.h"
+#include "hal.h"
+#include "serial_link/protocol/byte_stuffer.h"
+#include "serial_link/protocol/transport.h"
+#include "serial_link/protocol/frame_router.h"
+#include "matrix.h"
+#include <stdbool.h>
+#include "print.h"
+#include "config.h"
+
+static event_source_t new_data_event;
+static bool serial_link_connected;
+static bool is_master = false;
+
+static uint8_t keyboard_leds(void);
+static void send_keyboard(report_keyboard_t *report);
+static void send_mouse(report_mouse_t *report);
+static void send_system(uint16_t data);
+static void send_consumer(uint16_t data);
+
+host_driver_t serial_driver = {
+  keyboard_leds,
+  send_keyboard,
+  send_mouse,
+  send_system,
+  send_consumer
+};
+
+// Define these in your Config.h file
+#ifndef SERIAL_LINK_BAUD
+#error "Serial link baud is not set"
+#endif
+
+#ifndef SERIAL_LINK_THREAD_PRIORITY
+#error "Serial link thread priority not set"
+#endif
+
+static SerialConfig config = {
+    .sc_speed = SERIAL_LINK_BAUD
+};
+
+//#define DEBUG_LINK_ERRORS
+
+static uint32_t read_from_serial(SerialDriver* driver, uint8_t link) {
+    const uint32_t buffer_size = 16;
+    uint8_t buffer[buffer_size];
+    uint32_t bytes_read = sdAsynchronousRead(driver, buffer, buffer_size);
+    uint8_t* current = buffer;
+    uint8_t* end = current + bytes_read;
+    while(current < end) {
+        byte_stuffer_recv_byte(link, *current);
+        current++;
+    }
+    return bytes_read;
+}
+
+static void print_error(char* str, eventflags_t flags, SerialDriver* driver) {
+#ifdef DEBUG_LINK_ERRORS
+    if (flags & SD_PARITY_ERROR) {
+        print(str);
+        print(" Parity error\n");
+    }
+    if (flags & SD_FRAMING_ERROR) {
+        print(str);
+        print(" Framing error\n");
+    }
+    if (flags & SD_OVERRUN_ERROR) {
+        print(str);
+        uint32_t size = qSpaceI(&(driver->iqueue));
+        xprintf(" Overrun error, queue size %d\n", size);
+
+    }
+    if (flags & SD_NOISE_ERROR) {
+        print(str);
+        print(" Noise error\n");
+    }
+    if (flags & SD_BREAK_DETECTED) {
+        print(str);
+        print(" Break detected\n");
+    }
+#else
+    (void)str;
+    (void)flags;
+    (void)driver;
+#endif
+}
+
+bool is_serial_link_master(void) {
+    return is_master;
+}
+
+// TODO: Optimize the stack size, this is probably way too big
+static THD_WORKING_AREA(serialThreadStack, 1024);
+static THD_FUNCTION(serialThread, arg) {
+    (void)arg;
+    event_listener_t new_data_listener;
+    event_listener_t sd1_listener;
+    event_listener_t sd2_listener;
+    chEvtRegister(&new_data_event, &new_data_listener, 0);
+    eventflags_t events = CHN_INPUT_AVAILABLE
+            | SD_PARITY_ERROR | SD_FRAMING_ERROR | SD_OVERRUN_ERROR | SD_NOISE_ERROR | SD_BREAK_DETECTED;
+    chEvtRegisterMaskWithFlags(chnGetEventSource(&SD1),
+        &sd1_listener,
+        EVENT_MASK(1),
+        events);
+    chEvtRegisterMaskWithFlags(chnGetEventSource(&SD2),
+        &sd2_listener,
+        EVENT_MASK(2),
+        events);
+    bool need_wait = false;
+    while(true) {
+        eventflags_t flags1 = 0;
+        eventflags_t flags2 = 0;
+        if (need_wait) {
+            eventmask_t mask = chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(1000));
+            if (mask & EVENT_MASK(1)) {
+                flags1 = chEvtGetAndClearFlags(&sd1_listener);
+                print_error("DOWNLINK", flags1, &SD1);
+            }
+            if (mask & EVENT_MASK(2)) {
+                flags2 = chEvtGetAndClearFlags(&sd2_listener);
+                print_error("UPLINK", flags2, &SD2);
+            }
+        }
+
+        // Always stay as master, even if the USB goes into sleep mode
+        is_master |= usbGetDriverStateI(&USBD1) == USB_ACTIVE;
+        router_set_master(is_master);
+
+        need_wait = true;
+        need_wait &= read_from_serial(&SD2, UP_LINK) == 0;
+        need_wait &= read_from_serial(&SD1, DOWN_LINK) == 0;
+        update_transport();
+    }
+}
+
+void send_data(uint8_t link, const uint8_t* data, uint16_t size) {
+    if (link == DOWN_LINK) {
+        sdWrite(&SD1, data, size);
+    }
+    else {
+        sdWrite(&SD2, data, size);
+    }
+}
+
+static systime_t last_update = 0;
+
+typedef struct {
+    matrix_row_t rows[MATRIX_ROWS];
+} matrix_object_t;
+
+static matrix_object_t last_matrix = {};
+
+SLAVE_TO_MASTER_OBJECT(keyboard_matrix, matrix_object_t);
+MASTER_TO_ALL_SLAVES_OBJECT(serial_link_connected, bool);
+
+static remote_object_t* remote_objects[] = {
+    REMOTE_OBJECT(serial_link_connected),
+    REMOTE_OBJECT(keyboard_matrix),
+};
+
+void init_serial_link(void) {
+    serial_link_connected = false;
+    init_serial_link_hal();
+    add_remote_objects(remote_objects, sizeof(remote_objects)/sizeof(remote_object_t*));
+    init_byte_stuffer();
+    sdStart(&SD1, &config);
+    sdStart(&SD2, &config);
+    chEvtObjectInit(&new_data_event);
+    (void)chThdCreateStatic(serialThreadStack, sizeof(serialThreadStack),
+                              SERIAL_LINK_THREAD_PRIORITY, serialThread, NULL);
+}
+
+void matrix_set_remote(matrix_row_t* rows, uint8_t index);
+
+void serial_link_update(void) {
+    if (read_serial_link_connected()) {
+        serial_link_connected = true;
+    }
+
+    matrix_object_t matrix;
+    bool changed = false;
+    for(uint8_t i=0;i<MATRIX_ROWS;i++) {
+        matrix.rows[i] = matrix_get_row(i);
+        changed |= matrix.rows[i] != last_matrix.rows[i];
+    }
+
+    systime_t current_time = chVTGetSystemTimeX();
+    systime_t delta = current_time - last_update;
+    if (changed || delta > US2ST(1000)) {
+        last_update = current_time;
+        last_matrix = matrix;
+        matrix_object_t* m = begin_write_keyboard_matrix();
+        for(uint8_t i=0;i<MATRIX_ROWS;i++) {
+            m->rows[i] = matrix.rows[i];
+        }
+        end_write_keyboard_matrix();
+        *begin_write_serial_link_connected() = true;
+        end_write_serial_link_connected();
+    }
+
+    matrix_object_t* m = read_keyboard_matrix(0);
+    if (m) {
+        matrix_set_remote(m->rows, 0);
+    }
+}
+
+void signal_data_written(void) {
+    chEvtBroadcast(&new_data_event);
+}
+
+bool is_serial_link_connected(void) {
+    return serial_link_connected;
+}
+
+host_driver_t* get_serial_link_driver(void) {
+    return &serial_driver;
+}
+
+// NOTE: The driver does nothing, because the master handles everything
+uint8_t keyboard_leds(void) {
+    return 0;
+}
+
+void send_keyboard(report_keyboard_t *report) {
+    (void)report;
+}
+
+void send_mouse(report_mouse_t *report) {
+    (void)report;
+}
+
+void send_system(uint16_t data) {
+    (void)data;
+}
+
+void send_consumer(uint16_t data) {
+    (void)data;
+}
+