diff options
Diffstat (limited to 'tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c')
-rw-r--r-- | tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c | 845 |
1 files changed, 845 insertions, 0 deletions
diff --git a/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c b/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c new file mode 100644 index 0000000000..18f69350c0 --- /dev/null +++ b/tmk_core/protocol/arm_atsam/usb/udi_hid_kbd.c @@ -0,0 +1,845 @@ +/** + * \file + * + * \brief USB Device Human Interface Device (HID) keyboard interface. + * + * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ +/* + * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> + */ + +#include "samd51j18a.h" +#include "conf_usb.h" +#include "usb_protocol.h" +#include "udd.h" +#include "udc.h" +#include "udi_device_conf.h" +#include "udi_hid.h" +#include "udi_hid_kbd.h" +#include <string.h> + +//*************************************************************************** +// KBD +//*************************************************************************** +#ifdef KBD + +bool udi_hid_kbd_enable(void); +void udi_hid_kbd_disable(void); +bool udi_hid_kbd_setup(void); +uint8_t udi_hid_kbd_getsetting(void); + +UDC_DESC_STORAGE udi_api_t udi_api_hid_kbd = { + .enable = (bool(*)(void))udi_hid_kbd_enable, + .disable = (void (*)(void))udi_hid_kbd_disable, + .setup = (bool(*)(void))udi_hid_kbd_setup, + .getsetting = (uint8_t(*)(void))udi_hid_kbd_getsetting, + .sof_notify = NULL, +}; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_kbd_rate; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_kbd_protocol; + +COMPILER_WORD_ALIGNED +uint8_t udi_hid_kbd_report_set; + +bool udi_hid_kbd_b_report_valid; + +COMPILER_WORD_ALIGNED +uint8_t udi_hid_kbd_report[UDI_HID_KBD_REPORT_SIZE]; + +static bool udi_hid_kbd_b_report_trans_ongoing; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_kbd_report_trans[UDI_HID_KBD_REPORT_SIZE]; + +COMPILER_WORD_ALIGNED +UDC_DESC_STORAGE udi_hid_kbd_report_desc_t udi_hid_kbd_report_desc = { + { + 0x05, 0x01, // Usage Page (Generic Desktop) + 0x09, 0x06, // Usage (Keyboard) + 0xA1, 0x01, // Collection (Application) + 0x05, 0x07, // Usage Page (Keyboard) + 0x19, 0xE0, // Usage Minimum (224) + 0x29, 0xE7, // Usage Maximum (231) + 0x15, 0x00, // Logical Minimum (0) + 0x25, 0x01, // Logical Maximum (1) + 0x75, 0x01, // Report Size (1) + 0x95, 0x08, // Report Count (8) + 0x81, 0x02, // Input (Data, Variable, Absolute) + 0x81, 0x01, // Input (Constant) + 0x19, 0x00, // Usage Minimum (0) + 0x29, 0x65, // Usage Maximum (101) + 0x15, 0x00, // Logical Minimum (0) + 0x25, 0x65, // Logical Maximum (101) + 0x75, 0x08, // Report Size (8) + 0x95, 0x06, // Report Count (6) + 0x81, 0x00, // Input (Data, Array) + 0x05, 0x08, // Usage Page (LED) + 0x19, 0x01, // Usage Minimum (1) + 0x29, 0x05, // Usage Maximum (5) + 0x15, 0x00, // Logical Minimum (0) + 0x25, 0x01, // Logical Maximum (1) + 0x75, 0x01, // Report Size (1) + 0x95, 0x05, // Report Count (5) + 0x91, 0x02, // Output (Data, Variable, Absolute) + 0x95, 0x03, // Report Count (3) + 0x91, 0x01, // Output (Constant) + 0xC0 // End Collection + } +}; + +static bool udi_hid_kbd_setreport(void); + +static void udi_hid_kbd_report_sent(udd_ep_status_t status, iram_size_t nb_sent, udd_ep_id_t ep); + +static void udi_hid_kbd_setreport_valid(void); + +bool udi_hid_kbd_enable(void) +{ + // Initialize internal values + udi_hid_kbd_rate = 0; + udi_hid_kbd_protocol = 0; + udi_hid_kbd_b_report_trans_ongoing = false; + memset(udi_hid_kbd_report, 0, UDI_HID_KBD_REPORT_SIZE); + udi_hid_kbd_b_report_valid = false; + return UDI_HID_KBD_ENABLE_EXT(); +} + +void udi_hid_kbd_disable(void) +{ + UDI_HID_KBD_DISABLE_EXT(); +} + +bool udi_hid_kbd_setup(void) +{ + return udi_hid_setup(&udi_hid_kbd_rate, + &udi_hid_kbd_protocol, + (uint8_t *) &udi_hid_kbd_report_desc, + udi_hid_kbd_setreport); +} + +uint8_t udi_hid_kbd_getsetting(void) +{ + return 0; +} + +static bool udi_hid_kbd_setreport(void) +{ + if ((USB_HID_REPORT_TYPE_OUTPUT == (udd_g_ctrlreq.req.wValue >> 8)) + && (0 == (0xFF & udd_g_ctrlreq.req.wValue)) + && (1 == udd_g_ctrlreq.req.wLength)) { + // Report OUT type on report ID 0 from USB Host + udd_g_ctrlreq.payload = &udi_hid_kbd_report_set; + udd_g_ctrlreq.callback = udi_hid_kbd_setreport_valid; + udd_g_ctrlreq.payload_size = 1; + return true; + } + return false; +} + +bool udi_hid_kbd_send_report(void) +{ + if (!main_b_kbd_enable) { + return false; + } + + if (udi_hid_kbd_b_report_trans_ongoing) { + return false; + } + + memcpy(udi_hid_kbd_report_trans, udi_hid_kbd_report, + UDI_HID_KBD_REPORT_SIZE); + udi_hid_kbd_b_report_valid = false; + udi_hid_kbd_b_report_trans_ongoing = + udd_ep_run(UDI_HID_KBD_EP_IN | USB_EP_DIR_IN, + false, + udi_hid_kbd_report_trans, + UDI_HID_KBD_REPORT_SIZE, + udi_hid_kbd_report_sent); + + return udi_hid_kbd_b_report_trans_ongoing; +} + +static void udi_hid_kbd_report_sent(udd_ep_status_t status, iram_size_t nb_sent, udd_ep_id_t ep) +{ + UNUSED(status); + UNUSED(nb_sent); + UNUSED(ep); + udi_hid_kbd_b_report_trans_ongoing = false; + if (udi_hid_kbd_b_report_valid) { + udi_hid_kbd_send_report(); + } +} + +static void udi_hid_kbd_setreport_valid(void) +{ + //UDI_HID_KBD_CHANGE_LED(udi_hid_kbd_report_set); +} + +#endif //KBD + +//******************************************************************************************** +// NKRO Keyboard +//******************************************************************************************** +#ifdef NKRO + +bool udi_hid_nkro_enable(void); +void udi_hid_nkro_disable(void); +bool udi_hid_nkro_setup(void); +uint8_t udi_hid_nkro_getsetting(void); + +UDC_DESC_STORAGE udi_api_t udi_api_hid_nkro = { + .enable = (bool(*)(void))udi_hid_nkro_enable, + .disable = (void (*)(void))udi_hid_nkro_disable, + .setup = (bool(*)(void))udi_hid_nkro_setup, + .getsetting = (uint8_t(*)(void))udi_hid_nkro_getsetting, + .sof_notify = NULL, +}; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_nkro_rate; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_nkro_protocol; + +COMPILER_WORD_ALIGNED +uint8_t udi_hid_nkro_report_set; + +bool udi_hid_nkro_b_report_valid; + +COMPILER_WORD_ALIGNED +uint8_t udi_hid_nkro_report[UDI_HID_NKRO_REPORT_SIZE]; + +static bool udi_hid_nkro_b_report_trans_ongoing; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_nkro_report_trans[UDI_HID_NKRO_REPORT_SIZE]; + +COMPILER_WORD_ALIGNED +UDC_DESC_STORAGE udi_hid_nkro_report_desc_t udi_hid_nkro_report_desc = { + { + 0x05, 0x01, // Usage Page (Generic Desktop), + 0x09, 0x06, // Usage (Keyboard), + 0xA1, 0x01, // Collection (Application) - Keyboard, + + //Mods + 0x75, 0x01, // Report Size (1), + 0x95, 0x08, // Report Count (8), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum (1), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0xE0, // Usage Minimum (224), + 0x29, 0xE7, // Usage Maximum (231), + 0x81, 0x02, // Input (Data, Variable, Absolute), + + //LED Report + 0x75, 0x01, // Report Size (1), + 0x95, 0x05, // Report Count (5), + 0x05, 0x08, // Usage Page (LEDs), + 0x19, 0x01, // Usage Minimum (1), + 0x29, 0x05, // Usage Maximum (5), + 0x91, 0x02, // Output (Data, Variable, Absolute), + + //LED Report Padding + 0x75, 0x03, // Report Size (3), + 0x95, 0x01, // Report Count (1), + 0x91, 0x03, // Output (Constant), + + //Main keys + 0x75, 0x01, // Report Size (1), + 0x95, 0xF8, // Report Count (248), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum (1), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0x00, // Usage Minimum (0), + 0x29, 0xF7, // Usage Maximum (247), + 0x81, 0x02, // Input (Data, Variable, Absolute, Bitfield), + 0xc0, // End Collection - Keyboard + } +}; + +static bool udi_hid_nkro_setreport(void); +static void udi_hid_nkro_setreport_valid(void); +static void udi_hid_nkro_report_sent(udd_ep_status_t status, iram_size_t nb_sent, udd_ep_id_t ep); + +bool udi_hid_nkro_enable(void) +{ + // Initialize internal values + udi_hid_nkro_rate = 0; + udi_hid_nkro_protocol = 0; + udi_hid_nkro_b_report_trans_ongoing = false; + memset(udi_hid_nkro_report, 0, UDI_HID_NKRO_REPORT_SIZE); + udi_hid_nkro_b_report_valid = false; + return UDI_HID_NKRO_ENABLE_EXT(); +} + +void udi_hid_nkro_disable(void) +{ + UDI_HID_NKRO_DISABLE_EXT(); +} + +bool udi_hid_nkro_setup(void) +{ + return udi_hid_setup(&udi_hid_nkro_rate, + &udi_hid_nkro_protocol, + (uint8_t *) &udi_hid_nkro_report_desc, + udi_hid_nkro_setreport); +} + +uint8_t udi_hid_nkro_getsetting(void) +{ + return 0; +} + +//keyboard receives LED report here +static bool udi_hid_nkro_setreport(void) +{ + if ((USB_HID_REPORT_TYPE_OUTPUT == (udd_g_ctrlreq.req.wValue >> 8)) + && (0 == (0xFF & udd_g_ctrlreq.req.wValue)) + && (1 == udd_g_ctrlreq.req.wLength)) { + // Report OUT type on report ID 0 from USB Host + udd_g_ctrlreq.payload = &udi_hid_nkro_report_set; + udd_g_ctrlreq.callback = udi_hid_nkro_setreport_valid; //must call routine to transform setreport to LED state + udd_g_ctrlreq.payload_size = 1; + return true; + } + return false; +} + +bool udi_hid_nkro_send_report(void) +{ + if (!main_b_nkro_enable) { + return false; + } + + if (udi_hid_nkro_b_report_trans_ongoing) { + return false; + } + + memcpy(udi_hid_nkro_report_trans, udi_hid_nkro_report,UDI_HID_NKRO_REPORT_SIZE); + udi_hid_nkro_b_report_valid = false; + udi_hid_nkro_b_report_trans_ongoing = + udd_ep_run(UDI_HID_NKRO_EP_IN | USB_EP_DIR_IN, + false, + udi_hid_nkro_report_trans, + UDI_HID_NKRO_REPORT_SIZE, + udi_hid_nkro_report_sent); + + return udi_hid_nkro_b_report_trans_ongoing; +} + +static void udi_hid_nkro_report_sent(udd_ep_status_t status, iram_size_t nb_sent, udd_ep_id_t ep) +{ + UNUSED(status); + UNUSED(nb_sent); + UNUSED(ep); + udi_hid_nkro_b_report_trans_ongoing = false; + if (udi_hid_nkro_b_report_valid) { + udi_hid_nkro_send_report(); + } +} + +static void udi_hid_nkro_setreport_valid(void) +{ + //UDI_HID_NKRO_CHANGE_LED(udi_hid_nkro_report_set); +} + +#endif //NKRO + +//******************************************************************************************** +// EXK (extra-keys) SYS-CTRL Keyboard +//******************************************************************************************** +#ifdef EXK + +bool udi_hid_exk_enable(void); +void udi_hid_exk_disable(void); +bool udi_hid_exk_setup(void); +uint8_t udi_hid_exk_getsetting(void); + +UDC_DESC_STORAGE udi_api_t udi_api_hid_exk = { + .enable = (bool(*)(void))udi_hid_exk_enable, + .disable = (void (*)(void))udi_hid_exk_disable, + .setup = (bool(*)(void))udi_hid_exk_setup, + .getsetting = (uint8_t(*)(void))udi_hid_exk_getsetting, + .sof_notify = NULL, +}; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_exk_rate; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_exk_protocol; + +COMPILER_WORD_ALIGNED +uint8_t udi_hid_exk_report_set; + +bool udi_hid_exk_b_report_valid; + +COMPILER_WORD_ALIGNED +udi_hid_exk_report_t udi_hid_exk_report; + +static bool udi_hid_exk_b_report_trans_ongoing; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_exk_report_trans[UDI_HID_EXK_REPORT_SIZE]; + +COMPILER_WORD_ALIGNED +UDC_DESC_STORAGE udi_hid_exk_report_desc_t udi_hid_exk_report_desc = { + { + // System Control Collection (8 bits) + + 0x05, 0x01, // Usage Page (Generic Desktop), + 0x09, 0x80, // Usage (System Control), + 0xA1, 0x01, // Collection (Application), + 0x85, 0x02, // Report ID (2) (System), + 0x16, 0x01, 0x00, // Logical Minimum (1), + 0x26, 0x03, 0x00, // Logical Maximum (3), + 0x1A, 0x81, 0x00, // Usage Minimum (81) (System Power Down), + 0x2A, 0x83, 0x00, // Usage Maximum (83) (System Wake Up), + 0x75, 0x10, // Report Size (16), + 0x95, 0x01, // Report Count (1), + 0x81, 0x00, // Input (Data, Array), + 0xC0, // End Collection - System Control + + // Consumer Control Collection - Media Keys (16 bits) + + 0x05, 0x0C, // Usage Page (Consumer), + 0x09, 0x01, // Usage (Consumer Control), + 0xA1, 0x01, // Collection (Application), + 0x85, 0x03, // Report ID (3) (Consumer), + 0x16, 0x01, 0x00, // Logical Minimum (1), + 0x26, 0x9C, 0x02, // Logical Maximum (668), + 0x1A, 0x01, 0x00, // Usage Minimum (1), + 0x2A, 0x9C, 0x02, // Usage Maximum (668), + 0x75, 0x10, // Report Size (16), + 0x95, 0x01, // Report Count (1), + 0x81, 0x00, // Input (Data, Array), + 0xC0, // End Collection - Consumer Control + } +}; + +static bool udi_hid_exk_setreport(void); + +static void udi_hid_exk_report_sent(udd_ep_status_t status, iram_size_t nb_sent, udd_ep_id_t ep); + +static void udi_hid_exk_setreport_valid(void); + +bool udi_hid_exk_enable(void) +{ + // Initialize internal values + udi_hid_exk_rate = 0; + udi_hid_exk_protocol = 0; + udi_hid_exk_b_report_trans_ongoing = false; + memset(udi_hid_exk_report.raw, 0, UDI_HID_EXK_REPORT_SIZE); + udi_hid_exk_b_report_valid = false; + return UDI_HID_EXK_ENABLE_EXT(); +} + +void udi_hid_exk_disable(void) +{ + UDI_HID_EXK_DISABLE_EXT(); +} + +bool udi_hid_exk_setup(void) +{ + return udi_hid_setup(&udi_hid_exk_rate, + &udi_hid_exk_protocol, + (uint8_t *) &udi_hid_exk_report_desc, + udi_hid_exk_setreport); +} + +uint8_t udi_hid_exk_getsetting(void) +{ + return 0; +} + +static bool udi_hid_exk_setreport(void) +{ + if ((USB_HID_REPORT_TYPE_OUTPUT == (udd_g_ctrlreq.req.wValue >> 8)) + && (0 == (0xFF & udd_g_ctrlreq.req.wValue)) + && (1 == udd_g_ctrlreq.req.wLength)) { + // Report OUT type on report ID 0 from USB Host + udd_g_ctrlreq.payload = &udi_hid_exk_report_set; + udd_g_ctrlreq.callback = udi_hid_exk_setreport_valid; + udd_g_ctrlreq.payload_size = 1; + return true; + } + return false; +} + +bool udi_hid_exk_send_report(void) +{ + if (!main_b_exk_enable) { + return false; + } + + if (udi_hid_exk_b_report_trans_ongoing) { + return false; + } + + memcpy(udi_hid_exk_report_trans, udi_hid_exk_report.raw, UDI_HID_EXK_REPORT_SIZE); + udi_hid_exk_b_report_valid = false; + udi_hid_exk_b_report_trans_ongoing = + udd_ep_run(UDI_HID_EXK_EP_IN | USB_EP_DIR_IN, + false, + udi_hid_exk_report_trans, + UDI_HID_EXK_REPORT_SIZE, + udi_hid_exk_report_sent); + + return udi_hid_exk_b_report_trans_ongoing; +} + +static void udi_hid_exk_report_sent(udd_ep_status_t status, iram_size_t nb_sent, udd_ep_id_t ep) +{ + UNUSED(status); + UNUSED(nb_sent); + UNUSED(ep); + udi_hid_exk_b_report_trans_ongoing = false; + if (udi_hid_exk_b_report_valid) { + udi_hid_exk_send_report(); + } +} + +static void udi_hid_exk_setreport_valid(void) +{ + +} + +#endif //EXK + +//******************************************************************************************** +// MOU Mouse +//******************************************************************************************** +#ifdef MOU + +bool udi_hid_mou_enable(void); +void udi_hid_mou_disable(void); +bool udi_hid_mou_setup(void); +uint8_t udi_hid_mou_getsetting(void); + +UDC_DESC_STORAGE udi_api_t udi_api_hid_mou = { + .enable = (bool(*)(void))udi_hid_mou_enable, + .disable = (void (*)(void))udi_hid_mou_disable, + .setup = (bool(*)(void))udi_hid_mou_setup, + .getsetting = (uint8_t(*)(void))udi_hid_mou_getsetting, + .sof_notify = NULL, +}; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_mou_rate; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_mou_protocol; + +//COMPILER_WORD_ALIGNED +//uint8_t udi_hid_mou_report_set; //No set report + +bool udi_hid_mou_b_report_valid; + +COMPILER_WORD_ALIGNED +uint8_t udi_hid_mou_report[UDI_HID_MOU_REPORT_SIZE]; + +static bool udi_hid_mou_b_report_trans_ongoing; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_mou_report_trans[UDI_HID_MOU_REPORT_SIZE]; + +COMPILER_WORD_ALIGNED +UDC_DESC_STORAGE udi_hid_mou_report_desc_t udi_hid_mou_report_desc = { + { + 0x05, 0x01, // Usage Page (Generic Desktop), + 0x09, 0x02, // Usage (Mouse), + 0xA1, 0x01, // Collection (Application), + 0x09, 0x01, // Usage (Pointer), + 0xA1, 0x00, // Collection (Physical), + 0x05, 0x09, // Usage Page (Buttons), + 0x19, 0x01, // Usage Minimum (01), + 0x29, 0x05, // Usage Maximun (05), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum (1), + 0x95, 0x05, // Report Count (5), + 0x75, 0x01, // Report Size (1), + 0x81, 0x02, // Input (Data, Variable, Absolute), ;5 button bits + 0x95, 0x01, // Report Count (1), + 0x75, 0x03, // Report Size (3), + 0x81, 0x01, // Input (Constant), ;3 bit padding, + + 0x05, 0x01, // Usage Page (Generic Desktop), + 0x09, 0x30, // Usage (X), + 0x09, 0x31, // Usage (Y), + 0x15, 0x81, // Logical Minimum (-127), + 0x25, 0x7F, // Logical Maximum (127), + 0x95, 0x02, // Report Count (2), + 0x75, 0x08, // Report Size (8), + 0x81, 0x06, // Input (Data, Variable, Relative), ;2 position bytes (X & Y), + + 0x09, 0x38, // Usage (Wheel), + 0x15, 0x81, // Logical Minimum (-127), + 0x25, 0x7F, // Logical Maximum (127), + 0x95, 0x01, // Report Count (1), + 0x75, 0x08, // Report Size (8), + 0x81, 0x06, // Input (Data, Variable, Relative), + + 0x05, 0x0C, // Usage Page (Consumer), + 0x0A, 0x38, 0x02, // Usage (AC Pan (Horizontal wheel)), + 0x15, 0x81, // Logical Minimum (-127), + 0x25, 0x7F, // Logical Maximum (127), + 0x95, 0x01, // Report Count (1), + 0x75, 0x08, // Report Size (8), + 0x81, 0x06, // Input (Data, Variable, Relative), + + 0xC0, // End Collection, + 0xC0, // End Collection + } +}; + +static void udi_hid_mou_report_sent(udd_ep_status_t status, iram_size_t nb_sent, udd_ep_id_t ep); + +bool udi_hid_mou_enable(void) +{ + // Initialize internal values + udi_hid_mou_rate = 0; + udi_hid_mou_protocol = 0; + udi_hid_mou_b_report_trans_ongoing = false; + memset(udi_hid_mou_report, 0, UDI_HID_MOU_REPORT_SIZE); + udi_hid_mou_b_report_valid = false; + return UDI_HID_MOU_ENABLE_EXT(); +} + +void udi_hid_mou_disable(void) +{ + UDI_HID_MOU_DISABLE_EXT(); +} + +bool udi_hid_mou_setup(void) +{ + return udi_hid_setup(&udi_hid_mou_rate, + &udi_hid_mou_protocol, + (uint8_t *) &udi_hid_mou_report_desc, + NULL); +} + +uint8_t udi_hid_mou_getsetting(void) +{ + return 0; +} + +bool udi_hid_mou_send_report(void) +{ + if (!main_b_mou_enable) { + return false; + } + + if (udi_hid_mou_b_report_trans_ongoing) { + return false; + } + + memcpy(udi_hid_mou_report_trans, udi_hid_mou_report, UDI_HID_MOU_REPORT_SIZE); + udi_hid_mou_b_report_valid = false; + udi_hid_mou_b_report_trans_ongoing = + udd_ep_run(UDI_HID_MOU_EP_IN | USB_EP_DIR_IN, + false, + udi_hid_mou_report_trans, + UDI_HID_MOU_REPORT_SIZE, + udi_hid_mou_report_sent); + + return udi_hid_mou_b_report_trans_ongoing; +} + +static void udi_hid_mou_report_sent(udd_ep_status_t status, iram_size_t nb_sent, udd_ep_id_t ep) +{ + UNUSED(status); + UNUSED(nb_sent); + UNUSED(ep); + udi_hid_mou_b_report_trans_ongoing = false; + if (udi_hid_mou_b_report_valid) { + udi_hid_mou_send_report(); + } +} + +#endif //MOU + +//******************************************************************************************** +// RAW +//******************************************************************************************** +#ifdef RAW + +bool udi_hid_raw_enable(void); +void udi_hid_raw_disable(void); +bool udi_hid_raw_setup(void); +uint8_t udi_hid_raw_getsetting(void); + +UDC_DESC_STORAGE udi_api_t udi_api_hid_raw = { + .enable = (bool(*)(void))udi_hid_raw_enable, + .disable = (void (*)(void))udi_hid_raw_disable, + .setup = (bool(*)(void))udi_hid_raw_setup, + .getsetting = (uint8_t(*)(void))udi_hid_raw_getsetting, + .sof_notify = NULL, +}; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_raw_rate; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_raw_protocol; + +COMPILER_WORD_ALIGNED +uint8_t udi_hid_raw_report_set[UDI_HID_RAW_REPORT_SIZE]; + +static bool udi_hid_raw_b_report_valid; + +COMPILER_WORD_ALIGNED +uint8_t udi_hid_raw_report[UDI_HID_RAW_REPORT_SIZE]; + +static bool udi_hid_raw_b_report_trans_ongoing; + +COMPILER_WORD_ALIGNED +static uint8_t udi_hid_raw_report_trans[UDI_HID_RAW_REPORT_SIZE]; + +COMPILER_WORD_ALIGNED +UDC_DESC_STORAGE udi_hid_raw_report_desc_t udi_hid_raw_report_desc = { + { + 0x06, // Usage Page (Vendor Defined) + 0xFF, 0xFF, + 0x0A, // Usage (Mouse) + 0xFF, 0xFF, + 0xA1, 0x01, // Collection (Application) + 0x75, 0x08, // Report Size (8) + 0x15, 0x00, // Logical Minimum (0) + 0x25, 0xFF, // Logical Maximum (255) + 0x95, 0x40, // Report Count + 0x09, 0x01, // Usage (Input) + 0x81, 0x02, // Input (Data + 0x95, 0x40, // Report Count + 0x09, 0x02, // Usage (Output) + 0x91, 0x02, // Output (Data + 0xC0, // End Collection - Consumer Control + } +}; + +static bool udi_hid_raw_setreport(void); +static void udi_hid_raw_setreport_valid(void); + +static void udi_hid_raw_report_sent(udd_ep_status_t status, iram_size_t nb_sent, udd_ep_id_t ep); + +bool udi_hid_raw_enable(void) +{ + // Initialize internal values + udi_hid_raw_rate = 0; + udi_hid_raw_protocol = 0; + udi_hid_raw_b_report_trans_ongoing = false; + memset(udi_hid_raw_report, 0, UDI_HID_RAW_REPORT_SIZE); + udi_hid_raw_b_report_valid = false; + return UDI_HID_RAW_ENABLE_EXT(); +} + +void udi_hid_raw_disable(void) +{ + UDI_HID_RAW_DISABLE_EXT(); +} + +bool udi_hid_raw_setup(void) +{ + return udi_hid_setup(&udi_hid_raw_rate, + &udi_hid_raw_protocol, + (uint8_t *) &udi_hid_raw_report_desc, + udi_hid_raw_setreport); +} + +uint8_t udi_hid_raw_getsetting(void) +{ + return 0; +} + +static bool udi_hid_raw_setreport(void) +{ + if ((USB_HID_REPORT_TYPE_OUTPUT == (udd_g_ctrlreq.req.wValue >> 8)) + && (0 == (0xFF & udd_g_ctrlreq.req.wValue)) + && (UDI_HID_RAW_REPORT_SIZE == udd_g_ctrlreq.req.wLength)) { + // Report OUT type on report ID 0 from USB Host + udd_g_ctrlreq.payload = udi_hid_raw_report_set; + udd_g_ctrlreq.callback = udi_hid_raw_setreport_valid; //must call routine to transform setreport to LED state + udd_g_ctrlreq.payload_size = UDI_HID_RAW_REPORT_SIZE; + return true; + } + return false; +} + +bool udi_hid_raw_send_report(void) +{ + if (!main_b_raw_enable) { + return false; + } + + if (udi_hid_raw_b_report_trans_ongoing) { + return false; + } + + memcpy(udi_hid_raw_report_trans, udi_hid_raw_report,UDI_HID_RAW_REPORT_SIZE); + udi_hid_raw_b_report_valid = false; + udi_hid_raw_b_report_trans_ongoing = + udd_ep_run(UDI_HID_RAW_EP_IN | USB_EP_DIR_IN, + false, + udi_hid_raw_report_trans, + UDI_HID_RAW_REPORT_SIZE, + udi_hid_raw_report_sent); + + return udi_hid_raw_b_report_trans_ongoing; +} + +static void udi_hid_raw_report_sent(udd_ep_status_t status, iram_size_t nb_sent, udd_ep_id_t ep) +{ + UNUSED(status); + UNUSED(nb_sent); + UNUSED(ep); + udi_hid_raw_b_report_trans_ongoing = false; + if (udi_hid_raw_b_report_valid) { + udi_hid_raw_send_report(); + } +} + +static void udi_hid_raw_setreport_valid(void) +{ + +} + +#endif //RAW |