diff options
Diffstat (limited to 'tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/WiiCameraReadme.md')
-rw-r--r-- | tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/WiiCameraReadme.md | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/WiiCameraReadme.md b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/WiiCameraReadme.md new file mode 100644 index 0000000000..8577d73fb3 --- /dev/null +++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/WiiCameraReadme.md @@ -0,0 +1,13 @@ +Please see <http://wiibrew.org/wiki/Wiimote#IR_Camera> for the complete capabilities of the Wii camera. The IR camera code was written based on the above website and with support from Kristian Lauszus. + +This library is large, if you run into memory problems when uploading to the Arduino, disable serial debugging. + +To enable the IR camera code, simply set ```ENABLE_WII_IR_CAMERA``` to 1 in [settings.h](settings.h). + +This library implements the following settings: + +* Report sensitivity mode: 00 00 00 00 00 00 90 00 41 40 00 Suggested by inio (high sensitivity) +* Data Format: Extended mode (0x03). Full mode is not working yet. The output reports 0x3e and 0x3f need tampering with + * In this mode the camera outputs x and y coordinates and a size dimension for the 4 brightest points. + +Again, read through <http://wiibrew.org/wiki/Wiimote#IR_Camera> to get an understanding of the camera and its settings. |