Age | Commit message (Collapse) | Author |
|
This makes it overall easier to package for downstream distributions
instead of keeping tabs with inline documentation.
Signed-off-by: Morten Linderud <morten@linderud.pw>
|
|
* Add my own keymap
* Layer 0: Workman
* Layer 1: RSTHD (my own take on it)
* Layer 2: Mouse
* Layer 3: Navigation
* Layer 4: Symbols right
* Layer 5: Symbols left
* Layer 6: Fn keys
* Layer 7: Numbers
* Layer 8: Vim and misceallaneaous accessible from any other layer
* Move the current code to a 0.1 folder in preparation for upcoming changes
Version 0.2 is currently being prototyped and uses an arm chip which
will need its own firmware.
There is also the Ferris sweep which uses a pro-micro compatible board
which will need its own directory.
* Move Ferris out of handwired and into the light
The keyboard is now well out of the prototype phase as tens of them have
been produced and acquired by various people.
With 0.2 coming out, adoption is going to increase again as the board
will be available for sale at some recognized vendors.
Now is probably a good time to recognize its status as more than a
prototype :)
* Add code for the Ferris Sweep (a.k.a cradio)
The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB.
It has the key layout of a Ferris and uses a pro-micro connected to the
switches via direct pins so that diodes are not needed and the soldering
is minimal.
With their blessing, I took the code for it from DPB's own repo:
https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio
and did some adaptations such as removing commented out code, enabling
EE_HANDS and mouse keys for consistency with my existing Ferris code.
* Fix indentation in rules.mk
* Fix indentation in sweep's config
* Remove unnecessary lines from sweep's rules.mk
* Remove unnecessary lines from sweep's rules.mk
* Rename 0.1 to 0_1
This avoids the dot looking like the separation between a filename and
its extension.
In the same commit, bring matrix.c to the 0_1 folder as this was needed
for the code to compile properly (matrix.c is referred to in the readme
under `0_1` and is specific to that revision of the firmware).
* Update copyright statements for Sweep
|
|
* add kabraxcis keymap
this is a user keymap for a member of my group-buy. this is the creation commit
* add voaraq keymap
this is a user keymap for a member of my group-buy
* update kabraxcis keymap
* add licenses
|
|
* Cleanup
* Update info.json
* Update license notice
* Fix license notice
* Update keymap.c
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add RGB Light Mode Static Gradient 26
* Update
|
|
* basic keys working
* more stuff
* more stuff
* empty upper layers
* more stuff
* cleanup
* more stuff
* add the letter 'j'
* add '0' to layer 4
* implement umlauts and eszett with menu key as compose key
* add comment
* renamed layout
* change copyright notice
* add separate readme file
|
|
|
|
* Add Launchpad keymap
Note: RGB and Audio won't work when using B pins for audio
* Add support for rgb matrix on launchpad
* Update config for launchpag
* Disable wait on layer change
* Update config for ErgoDox EZ
* Fixup rgb light userspace code
* Move Corne layout to community layouts folder
* Update config for corne to support community layouts
* Add license header to files
* Minor cleanup of userspace config
* Update Pimironi Trackball code
* Increase debounce time on ergodox
* Fix keymap handling
* Enable wait for USB for moonlander
* Update/add license headers
* fix review issues
|
|
* Add AELITH keyboard
* Add AELITH keyboard
* Update keyboards/ramonimbao/aelith/rules.mk
* Update keyboards/ramonimbao/aelith/config.h
* Update keyboards/ramonimbao/aelith/keymaps/via/rules.mk
* Update keyboards/ramonimbao/aelith/readme.md
* Update keyboards/ramonimbao/aelith/readme.md
* Update keyboards/ramonimbao/aelith/config.h
* Update keyboards/ramonimbao/aelith/config.h
* Change layouts based on suggestions
* Add LAYOUT_alice macro
|
|
|
|
|
|
|
|
* Initial test version of Scarlet keyboard
* First commit of DElec Scarlet
* Change to new Draytronics branding
* Update to keyboard details
Update to keyboard details and link to Draytronics website.
* Update keyboards/draytronics/scarlet/scarlet.h
* Update keyboards/draytronics/scarlet/rules.mk
* Update keyboards/draytronics/scarlet/readme.md
* Update keyboards/draytronics/scarlet/keymaps/default/keymap.c
* Update keyboards/draytronics/scarlet/config.h
* Update keymap.c
* Update config.h
* Update scarlet.h
* Update keyboards/draytronics/scarlet/config.h
* Update keyboards/draytronics/scarlet/config.h
* Update keyboards/draytronics/scarlet/scarlet.h
* Update keyboards/draytronics/scarlet/keymaps/default/keymap.c
|
|
|
|
* added spooky keyboard t
o boardsouce folder
* restoring to clean start I think
* added back in my files for this keyboard
* Update keyboards/boardsource/holiday/spooky/config.h
* Update keyboards/boardsource/holiday/spooky/keymaps/rip_mx/keymap.c
* Update keyboards/boardsource/holiday/spooky/readme.md
* Update keyboards/boardsource/holiday/spooky/spooky.h
* updated all keymaps to support 2x3 ortho
* Apply suggestions from code review
|
|
* adds eosti/maypad keymap
* remove empty function calls
|
|
* move drakon to jagdpietr directory
* Updates
Recommended changes implemented in this commit due to progress loss in last commit
* Update vusb
* Update keyboards/jagdpietr/drakon/drakon.c
|
|
* Add Levinson VIA keymap
* Update product IDs for Levinson to embed version number
* Add layer 3 access
* Apply suggestions from code review
|
|
* Update default and via keymaps
* Update PID and enabled build options
* Update keyboards/keebio/nyquist/keymaps/via/keymap.c
* Update keyboards/keebio/nyquist/rev3/rules.mk
* Update keyboards/keebio/nyquist/rev2/rules.mk
|
|
* roo initial
* update scannign t imes
* enable dma
* rename kangaroo
* updates
* update rules.mk
* keymap
* fix up config
* fix reamde
* fix up config
* update license headers
* rules.mk update
* info json
* Update keyboards/xelus/kangaroo/rules.mk
|
|
* add ats folder
* fix duplicate matrix key
* fix matrix issues
* fix missing comma in info.json
* clean up info.json
* rm game layer toggle in via keymap
* update via keymap rules.mk
* Update info.json
* clear up layout graphics
* Apply suggestions from code review
* Update 45_ats.c
* Update 45_ats.h
* Update config.h
* Update config.h
* Update keyboards/45_ats/keymaps/default/config.h
* Update keymap.c
* Update keyboards/45_ats/keymaps/default/keymap.c
* Update keymap.c
* Update keyboards/45_ats/keymaps/via/keymap.c
* Apply suggestions from code review
* Update keyboards/45_ats/config.h
|
|
* Add nordic keymap
Changes from default:
- Change button right of `LSHIFT` to `KC_NUBS`
- Add some more keys to the second layer.
* Add sleepmode functionality
Added a sleepmode, this turns of the rgb_matrix if no key was pressed for x minutes. Not default on, so you have to enable it by defining `SLEEPMODE_ENABLED`.
* Move all sleepmode config to config.h, rename keymap
- Move all configurations for sleepmode to keymap config.h
- rename keymap to include reference to it having sleepmode (suggestion from guy the discord-server)
- add copyright in config.h
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/config.h
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
|
|
* Make via config for redox_w
* Add missing layer function back, fixed typo and maintainer name
|
|
* [Keyboard] Support MJ64 which is a 60% Hotswap RGB keyboard with arrows
and the size of left shift is 2.25U
* Update keyboards/melgeek/mj64/mj64.h
* Update keyboards/melgeek/mj64/keymaps/default/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/keymaps/default/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/rev2/rules.mk
* Update keyboards/melgeek/mj64/rev1/rules.mk
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/info.json
* Update keyboards/melgeek/mj64/info.json
* Update keyboards/melgeek/mj64/rev1/config.h
* Update keyboards/melgeek/mj64/rev2/config.h
* Update the VID and PID in mj64/config.h
add the rev1/rev1.c
add the rev2/rev2.c
|
|
* [Keyboard] GH60 v1.3 Support
* clean up info.json
Update key sizes and positioning.
* add readme
* add image to readme
* fix up info.json LAYOUT_all
* add LAYOUT_60_ansi
I'm guessing at this based on a photo of the PCB. Chances are high that this isn't fully functional.
* add matrix block comment to v1p3.h
* add default_ansi keymap
* add keymap readme files
* fix LAYOUT_60_ansi macro
* enable 60_ansi Community Layout support
* add layouts for 60_ansi_arrow
Add LAYOUT_60_ansi_arrow and LAYOUT_60_ansi_arrow_split_bs macros. (The user helping me test runs the split Backspace variant.)
* add Tsangan, HHKB, and 64_ansi layout macros
* add factory keymaps and layout info
* update copyright headers
I mean... if someone's gotta "own" this code...
* fix broken factory_* keymaps
|
|
* back_to_the_roots
* mouse layer is gone
* mouse layer is gone
|
|
* Add Z70Ultra which is a Hotsawp RGB 65% keyboard
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update info.json
update the name of layout to consistent the keyboard.
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra
* Support Z70Ultra
[Modified] info.json to support two different layouts
[Add] rules.mk to support default folder
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove excessive arguments from LAYOUT_split_space
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Use macro replace with the literal for CS & SW
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add GPL for files
* Update keymaps/default/keymap.c
* Update keymaps/via/keymap.c
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
|
|
* add Prime_E RGB PCB
* Update keyboards/primekb/prime_e/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/primekb/prime_e/std/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/primekb/prime_e/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/primekb/prime_e/rgb/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/primekb/prime_e/rgb/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/primekb/prime_e/rgb/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/primekb/prime_e/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/primekb/prime_e/std/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/primekb/prime_e/std/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
|
|
-Changing the VID
-Add a keymap via
-Keymap and copyright fixes
|
|
* Add 7splus keyboard.
A 85 keys ANSI Layout split keyboard.
Salicylic-acid3
* Update keyboards/7splus/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/7splus/keymaps/salicylic/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/7splus/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added VIA keymap and a few updates
Adding a VIA Keymap
Updating the key layout diagram
Copywrite added for salicylic keymap
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
* Add via keymap for pancake
* Add license to keymap
* Update rules.mk
* Update rules.mk
* Update keyboards/spaceman/pancake/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
* Move SP-111 to vendor folder
* Fix space indentation
|
|
* Added LAYOUT_alice
* Added fauxpark's suggestions as well as updating keymap graphic
* Added file header and used noroadleft's fix to the info.json for fast input mode
|
|
* Adding opus keyboard
* Preparing keyboard for PR
* Adding images to default keymap readme
* Changing VENDOR_ID
* Minor changes
* Changing PRODUCT_ID
* Removing comment
* Fixing tap dance issue
* #pragma once instead of #ifndef
* Resolving PR suggestions
* Removing ifndef
* Using lower resolution image
* Formatting comments
* Adjusting copyright year
Co-authored-by: Raleigh Wayland <raleigh.wayland@stormapp.com>
|
|
* Add VIA code to ergoTravel, VendorId changed to allow via
* Update LTO_ENABLE for via
* Accept comments from the QMK PR discussion
* Restore original rules.mk from qmk master, update via rules to remove redundant bootmagic
* rules update
* find and use unique VID without qmk. Used 0x4A50, did not find clash
* Removed unused via layer
* Reset hard to last clean commit, redo changes for Hex Translation and Enum
|
|
* add split plus layout
* update README
* rename splitPlus to split_plus
* Update keyboards/keyhive/maypad/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
|
|
* adds eosti/planck keymaps
* updates eosti keymaps
* add header guard to bdn9 config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* reduce file size of compiled firmware
* move console disable to rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
|
|
|
|
|
|
* on behalf of VashtaNerada commiting his code to get caps lock led working on the soldered E8d E8.5
* Update keyboards/exclusive/e85/soldered/soldered.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
|
|
* update "Hardware Availability"
* add a section of "How to build"
* update "Hardware Supported"
* add SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT for rev3_4rows/config.h
Co-authored-by: keyaki-namiki <28521374+keyaki-namiki@users.noreply.github.com>
|
|
* Update Japanese document
* Fix inline code
* Update docs/ja/other_vscode.md
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
|
|
|
|
* update reviung34 PRODUCT_ID
|
|
|
|
Co-authored-by: FilipParyz <paryz.1i12@op.p>
|
|
|
|
* japanese translation of docs/pr_checklist.md
* update docs/ja/pr_checklist.md
* update docs/ja/pr_checklist.md
* update docs/ja/pr_checklist.md
* add :id=lite to docs/ja/custom_matrix.md
* add :id=... to docs/ja/custom_quantum_functions.md
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: shela <shelaf@users.noreply.github.com>
* Update docs/ja/pr_checklist.md
* Update docs/ja/pr_checklist.md
* Update docs/ja/pr_checklist.md
Co-authored-by: s-show <s1shimz@gmail.com>
* Update docs/ja/pr_checklist.md
Co-authored-by: s-show <s1shimz@gmail.com>
Co-authored-by: shela <shelaf@users.noreply.github.com>
Co-authored-by: s-show <s1shimz@gmail.com>
|
|
* add voyager60_alps
* add readme, add gpl headers
* add info.json
* include all keys in info.json
* fix typo in config.h
* Update keyboards/ai03/voyager60_alps/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/ai03/voyager60_alps/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ai03/voyager60_alps/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ai03/voyager60_alps/rules.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/ai03/voyager60_alps/voyager60_alps.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
|
|
* own KBD67 MKII keymap
Signed-off-by: Christian Eiden <christian@eiden.ch>
* Update keyboards/kbdfans/kbd67/mkiirgb/keymaps/cykedev/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
Signed-off-by: Christian Eiden <christian@eiden.ch>
Co-authored-by: Drashna Jaelre <drashna@live.com>
|