summaryrefslogtreecommitdiff
path: root/builddefs
AgeCommit message (Collapse)Author
2022-07-12Cirque trackpad features: circular scroll, inertial cursor (#17482)Daniel Kao
2022-07-07[Core] Update mpaland/printf to eyalroz/printf fork (#16163)Stefan Kerkmann
mpaland printf implementation was abandoned in ~2019 and the fork by eyalroz is now regarded to be the goto replacement of it. So this commit incoporates the changes needed to use this fork in QMK. Note that pointer ptrdiff_t is always supported since commit 51c90f93a97fdaef895783ecbe24569be0db7cb8
2022-07-05Allow for `keymaps` array to be implemented in a file other than ↵Nick Brassel
`$(KEYMAP_C)` (#17559)
2022-07-03Tentative Teensy 3.5 support (#14420)Ryan
* Tentative Teensy 3.5 support * Set firmware format to .hex for ARM Teensys * Got to "device descriptor failed" by comparing with Teensy 3.6 code * Drop down to 96MHz... * Bump back up to 120MHz
2022-07-02Feature-ify Send String (#17275)Ryan
2022-07-02RP2040 emulated EEPROM. (#17519)Nick Brassel
2022-06-30[Core] Add Raspberry Pi RP2040 support (#14877)Stefan Kerkmann
* Disable RESET keycode because of naming conflicts * Add Pico SDK as submodule * Add RP2040 build support to QMK * Adjust USB endpoint structs for RP2040 * Add RP2040 bootloader and double-tap reset routine * Add generic and pro micro RP2040 boards * Add RP2040 onekey keyboard * Add WS2812 PIO DMA enabled driver and documentation Supports regular and open-drain output configuration. RP2040 GPIOs are sadly not 5V tolerant, so this is a bit use-less or needs extra hardware or you take the risk to fry your hardware. * Adjust SIO Driver for RP2040 * Adjust I2C Driver for RP2040 * Adjust SPI Driver for RP2040 * Add PIO serial driver and documentation * Add general RP2040 documentation * Apply suggestions from code review Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org>
2022-06-30Wear-leveling EEPROM drivers: `embedded_flash`, `spi_flash`, `legacy` (#17376)Nick Brassel
2022-06-27Generic wear-leveling algorithm (#16996)Nick Brassel
* Initial import of wear-leveling algorithm. * Alignment. * Docs tweaks. * Lock/unlock. * Update quantum/wear_leveling/wear_leveling_internal.h Co-authored-by: Stefan Kerkmann <karlk90@pm.me> * More tests, fix issue with consolidation when unlocked. * More tests. * Review comments. * Add plumbing for FNV1a. * Another test checking that checksum mismatch clears the cache. * Check that the write log still gets played back. Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-06-23Refactor steno and add `STENO_PROTOCOL = [all|txbolt|geminipr]` (#17065)precondition
* Refactor steno into STENO_ENABLE_[ALL|GEMINI|BOLT] * Update stenography documentation * STENO_ENABLE_TXBOLT → STENO_ENABLE_BOLT TXBOLT is a better name but BOLT is more consistent with the pre-existing TX Bolt related constants, which all drop the "TX " prefix * Comments * STENO_ENABLE_[GEMINI|BOLT|ALL] → STENO_PROTOCOL = [geminipr|txbolt|all] * Add note on lacking V-USB support * Clear chord at the end of the switch(mode){send_steno_chord} block * Return true if NOEVENT * update_chord_xxx → add_xxx_key_to_chord * Enable the defines for all the protocols if STENO_PROTOCOL = all * Mention how to use `steno_set_mode` * Set the default steno protocol to "all" This is done so that existing keymaps invoking `steno_set_mode` don't all suddenly break * Add data driver equivalents for stenography feature * Document format of serial steno packets (Thanks dnaq) * Add missing comma
2022-06-18[Core] Split ChibiOS usart split driver in protocol and hardware driver part ↵Stefan Kerkmann
(#16669)
2022-06-16Dump out the largest symbols in flash and in RAM. (#17397)Nick Brassel
2022-06-13tap-dance: Restructure code and document in more detail (#16394)Jouke Witteveen
2022-06-08Rework paths for eeprom locations. (#17326)Nick Brassel
* Rework paths for eeprom locations. * File relocation. * Wrong file move. * Fixup test paths.
2022-06-06[Core] Update C standard to GNU11, C++ to GNU++14 (#17114)Stefan Kerkmann
2022-06-05Add keymap wrappers for introspection into the keymap. (#17229)Nick Brassel
* Introspection handlers for keymaps. * Renaming.
2022-05-30Removes terminal from QMK. (#17258)Nick Brassel
2022-05-23Added support for Wb32fq95 (#16871)Joy Lee
2022-05-16Warn about LTO with arm_atsam, not ChibiOS. (#17106)Nick Brassel
2022-05-16Data driven `g_led_config` (#16728)Joel Challis
2022-05-14[Core] Add Caps Word feature to core (#16588)Pascal Getreuer
Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com>
2022-05-06Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-05-06Ensure .hex file output for ARM Teensys (#17014)Ryan
2022-04-19Update wb32-dfu (#16438)Joy Lee
2022-04-16Implement XAP 'secure' core requirements (#16843)Joel Challis
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-04-13Quantum Painter (#10174)Nick Brassel
* Install dependencies before executing unit tests. * Split out UTF-8 decoder. * Fixup python formatting rules. * Add documentation for QGF/QFF and the RLE format used. * Add CLI commands for converting images and fonts. * Add stub rules.mk for QP. * Add stream type. * Add base driver and comms interfaces. * Add support for SPI, SPI+D/C comms drivers. * Include <qp.h> when enabled. * Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789. * Add support for GC9A01. * Add support for ILI9341. * Add support for ILI9163. * Add support for SSD1351. * Implement qp_setpixel, including pixdata buffer management. * Implement qp_line. * Implement qp_rect. * Implement qp_circle. * Implement qp_ellipse. * Implement palette interpolation. * Allow for streams to work with either flash or RAM. * Image loading. * Font loading. * QGF palette loading. * Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images. * Image drawing. * Animations. * Font rendering. * Check against 256 colours, dump out the loaded palette if debugging enabled. * Fix build. * AVR is not the intended audience. * `qmk format-c` * Generation fix. * First batch of docs. * More docs and examples. * Review comments. * Public API documentation.
2022-04-03Add warning for CTCP/CONVERT_TO_PROTON_C. (#16782)Nick Brassel
2022-04-03Refactor CTPC logic to allow future converters (#16621)Joel Challis
* Refactor CTPC logic to allow future converters * Update builddefs/converters.mk Co-authored-by: Stefan Kerkmann <karlk90@pm.me> Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-03-19HD44780 driver rework (#16370)Ryan
2022-03-16Merge remote-tracking branch 'origin/master' into developQMK Bot
2022-03-17Print out generated files during build (#16672)Joel Challis
2022-03-09Add support for encoder mapping. (#13286)Nick Brassel
2022-03-08Asymmetric encoders, encoder tests. (#16068)Nick Brassel
2022-03-07ChibiOS 21.11.1 update. (#16251)Nick Brassel
* ChibiOS 21.11.1 update. * `uf2-tinyuf2` => `tinyuf2` * Updated chibios-contrib, fixup preprocessor for tinyuf2 bootloader. * Fixup keychron L433 boards. * Makefile cleanup. * RISC-V build fixes. * Fixup RISC-V build.
2022-02-11Added external spi flash driver. (#15419)Joy Lee
2022-02-11ps2/avr: use the correct file name (#16316)Idan Kamara
This was missed in https://github.com/qmk/qmk_firmware/pull/14895. Thanks to fauxpark for spotting this.
2022-02-10Migrate more makefile utilities to builddefs sub-directory (#16002)Joel Challis
2022-02-04Standardise error output. (#16220)Nick Brassel
2022-02-03Create a build error if no bootloader is specified. (#16181)Nick Brassel
* Create a build error if no bootloader is specified. * Update builddefs/bootloader.mk Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2022-01-24Add L432, L442. (#16016)Nick Brassel
2022-01-06Fixes for bootloader refactor build failures (#15638)Ryan
2021-12-27Refactor `bootloader_jump()` implementations (#15450)Ryan
* Refactor `bootloader_jump()` implementations * Fix tests? * Rename `atmel-samba` to `md-boot`
2021-12-27Add a clarification to an error message (#15207)Hugo Osvaldo Barrera
Makes this a bit more foolproof. See https://github.com/qmk/qmk_firmware/issues/15202
2021-11-27Westberrytech pr (#14422)Joy Lee
* Added support for WB32 MCU * Modified eeprom_wb32.c * Remove the eeprom_wb32-related code
2021-11-26New feature: `DYNAMIC_TAPPING_TERM_ENABLE` (#11036)precondition
* New feature: `DYNAMIC_TAPPING_TERM_ENABLE` 3 new quantum keys to configure the tapping term on the fly. * Replace sprintf call in tapping_term_report by get_u16_str * Replace tab with 4 spaces
2021-11-15Add support for deferred executors. (#14859)Nick Brassel
* Add support for deferred executors. * More docs. * Include from quantum.h * Cleanup. * Parameter checks * Comments. * qmk format-c * I accidentally a few words. * API name change. * Apply suggestions from code review Co-authored-by: Sergey Vlasov <sigprof@gmail.com> * Review comments. * qmk format-c * Review comments. Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
2021-10-29More platform/protocol alignment (#14976)Joel Challis
2021-10-28Migrate makefile utilities to sub-directory (#14917)Joel Challis
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-14 04:20:54 +0000