summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-10-12Remove i2c logic for STM32F103xB in favour of USE_I2CV1 (#6926)Joel Challis
* Remove i2c logic for STM32F103xB in favour of USE_I2CV1 * Remove i2c logic for STM32F103xB in favour of USE_I2CV1
2019-10-08[Keyboard] RGB updates on NK65 and HS60 (#6795)yiancar
* RGB update commit * Convert caps lock indicator check to IS_LED_ON * ISSI3733 minor change
2019-09-25[Keyboard] Added support for ErgoDox with STM32 Microcontroller (#5398)Yaotian Feng
* Began Work On STM32 Ergodox Changes to be committed: new file: keyboards/ergodox_stm32/config.h new file: keyboards/ergodox_stm32/rules.mk * test * Now it compile. Not linking thou * Screw this Linker. It links now! * Blinkly Keyboard * bootloader test code * Working on matrix / i2c stuff * Progress (LED Blink) * Progress on MCP_23017 Status Flag * [WIP] * update * Works! Remeber to change back the bootloader address when the new bootloadrer is ready. * Time to go debug the i2c * Finally, it now works with PCB Rev 1.0.2 * updated for rev.2 pcb * minor compilation fix * Why when debugger is enabled then everything works. * Remeber to call init functions. * Update arm i2c driver to support STM32F103 series device. * fix include once header. Replaced with #pragma once. * complication test
2019-09-19DRV2605L Continuous Haptic Feedback Support (#6461)MechMerlin
* provide means to turn on RTP mode and set the amplitude * new keycode HPT_CONT to turn RTP off/on * introduce new keycodes HPT_CONI, and HPT_COND for Haptic Continuous Increase and Decrease * support for continuous mode amplitude increase and decrease * code cleanup * update docs to reference new keycodes and functionality * don't touch the keymaps * add function prototypes * add proper guards * cleanup guards * remove extra reserved
2019-09-04Fix battery level code in adafruit_ble.cpp (#6648)bwhelm
* Fix battery level code in adafruit_ble.cpp The code in tsk_core/protocol/lufa/adafluit_ble.cpp that polls the battery level for the Adafruit feather BLE controller reads the regulated voltage, not the raw voltage coming from the battery. To do that, the Adafruit Feather docs say you should read from pin A9: https://learn.adafruit.com/adafruit-feather-32u4-basic-proto/power-management#measuring-battery-4-9. (See also https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/pinouts#logic-pins-2-9.) I'm not sure why, but analogRead(9); doesn't read the correct pin. Checking all available analog pins experimentally, it turns out that analogRead(7); returns the correct value. So the code above should read: state.vbat = analogRead(7); * Update tmk_core/protocol/lufa/adafruit_ble.cpp Co-Authored-By: Drashna Jaelre <drashna@live.com> * Remove old comment * Fix linking error * Remove `#ifdef` around `#include analog.h`. * Really fix linking error
2019-08-30Removed prescaler define from avr i2c, as it was impossible to use (#6617)Mikkel Jeppesen
2019-08-30Fix Redefinition of OLED_TIMEOUT (#6628)Drashna Jaelre
2019-08-30clang-format changesskullY
2019-08-25Added OLED Display autoscroll during periods of OLED data inactivity (#6546)XScorpion2
* Added OLED Display autoscroll during periods of OLED data inactivity. * Fixing compile errors * Feedback from review
2019-08-22Relocate pca9555 driver to core (#6563)Joel Challis
* Move pca9555 files to central location * Get pca9555 boards compiling * Slight alignment of rules.mk
2019-07-27(OLED) Added support for CR (#6399)XScorpion2
Currently OLED Dirver only supports LF (\n) character in a string to clear out the rest of the current line and advance to the next line for writing. This PR adds support for CR (\r) character as well to advance to the next line, however not clear out the rest of the current line. This is extremely useful when you want to display a multi-line logo using a single array without wiping out exiting lines and flagging the OLED as dirty unnecessarily.
2019-07-21Refactoring wilba.tech PCBs, updating Rama Works U80-A (#6272)Wilba
* Added WT65-B, WT75-B, minor fixes * Update keyboards/wilba_tech/wt65_b/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/wilba_tech/wt65_b/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/wilba_tech/wt75_b/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Change DEBOUNCING_DELAY to DEBOUNCE * Change DEBOUNCING_DELAY to DEBOUNCE * Move Zeal60/Zeal65 files to keyboards/wilba_tech * Change DEBOUNCING_DELAY to DEBOUNCE * Refactoring zeal60 code to wilba_tech * Moved Rama Works PCBs to wilba_tech * Rename Rama Works files * Cleanup info.json * Cleanup readme.md * Cleanup USB device strings * U80-A RGB matrix, IS31FL3731 driver changes * Fixed #include from keyboards/zeal60
2019-07-16Align ARM i2c_readReg with AVR (#6314)Joel Challis
* Align arm i2c_readReg with avr * Align arm i2c_readReg with avr - fix cannonkeys
2019-07-16Add ARM I2Cv1 support to i2c_master (#6262)Joel Challis
* Add ARM I2Cv1 support to i2c_master * Add I2Cv1 docs
2019-07-15Add GPL3 header to avr i2c files (#6332)Drashna Jaelre
* Add GPL3 header to avr i2c files * Add for i2c_slave as well * Fix formatting of license header
2019-07-09Use QUANTUM_LIB_SRC for i2c_master.c inclusion (#5617)Drashna Jaelre
Using QUANTUM_LIB_SRC prevents the warning when multiple sources add the i2c_master.c file. Boards such as the Ergodox EZ Glow see this warning every time they compile because the board uses the file in general, and because the RGB LED Matrix requires it, as well.
2019-06-11Add SH1106 OLED support (#5787)Michael F. Lamb
* modify oled_driver to support SH1106 also: - improve mechanism to specify which OLED IC we use - comment calc_bounds() - give OLED_COLUMN_OFFSET a default value - inline comment re: OLED MEMORY_MODE and SH1106 - update docs/feature_oled_driver.h for SH1106 support and related changes - docs: OLED: note we have tested SSD1306 on ARM boards (per @XScorpion2) - define out MEMORY_MODE when using SH1106 OLED driver * document that SSD1306 128x64 on AVR works Per @XScorpion2: https://github.com/qmk/qmk_firmware/pull/5787#discussion_r291837842
2019-06-07Fixing OLED Driver for 128x64 displays (#6085)XScorpion2
2019-06-04Moving rgb typedefs into a single location (#5978)XScorpion2
Because someone named the define poorly Using full relative path as handwired/promethium has a color.h file
2019-06-01Parameterise STM32 I2C pin modes and timing parameters. (#5671)Nick Brassel
I2C timing parameters were seemingly set up for an STM32F303 target MCU, at a specific clock speed. This commit allows specifying the timing parameters via config.h, allowing other STM32 MCUs to be targeted, potentially at different clock frequencies. Alternate function modes for the I2C pins are now also configurable, allowing for remapping to other pins.
2019-05-15NK65 Addition (#5865)yiancar
* Nk65 initial commit * Minor fix for compatibility * Make everything pretty * Update keyboards/nk65/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/nk65/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Chmod Dummy * Update getting_started_introduction.md * Revert "Update getting_started_introduction.md" This reverts commit daf446acf7ae4ae00488b389ce04f2cfca708d44.
2019-05-01Fixing incorrect usage of RGBLED_NUM in ws2812 driver when used with RGB ↵XScorpion2
Matrix (#5744)
2019-04-20Removed / replaced questionable logos and added licenses file for safe logosRyan Caltabiano
2019-04-20Reducing size of data send in one frame & update Zen rev2 oled usageRyan Caltabiano
2019-04-20OLED Driver FeatureRyan Caltabiano
2019-04-14Features/ws2812 matrix driver (#5418)XScorpion2
* WS2812 driver implementation for RGB Matrix * Added driver configuration docs
2019-04-08Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes (#5532)Jack Humbert
* RGB Matrix overhaul Breakout of animations to separate files Integration of optimized int based math lib Overhaul of rgb_matrix.c and animations for performance * Updating effect function api for future extensions * Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary * Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain * Adds the Planck EZ, 3737 RGB, fixes out-of-tune notes * fix bug in quantum/rgb_matrix_drivers.c Co-Authored-By: jackhumbert <jack.humb@gmail.com> * update command setting to the correct default * correct rgb config * remove commented-out lines * update docs for the 3737 * Update docs/feature_rgb_matrix.md Co-Authored-By: jackhumbert <jack.humb@gmail.com>
2019-04-06i2c_init update to work with atmega32a boards (#5562)MechMerlin
* On i2c_init, enable two wire interface, twi interrupt, and slave address ACK along with pull up resistors. * thanks to some testing by drashna, we know that setting TWI doesn't work for all boards. Putting the new code into an ifdef block
2019-03-15Fix return value of i2c_readReg and i2c_receive (#5410)zvecr
2019-03-12Next set of split_common changes (#4974)James Churchill
* Update split_common to use standard i2c drivers * Eliminate RGB_DIRTY/BACKLIT_DIRTY * Fix avr i2c_master error handling * Fix i2c_slave addressing * Remove unneeded timeout on i2c_stop() * Fix RGB I2C transfers * Remove incorrect comment
2019-02-16Haptic feedback generalized - DRV2605 and solenoids (#4939)ishtob
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards * Haptic feedback enhancements: on/off toggle working, feedback order working todo: -work on modes switching -get modes switching to save to eeprom * haptic enhancement - eeprom and modes added * Added set and get functions for haptic feedback * initial implementation of solenoids under haptic feedback * changed eeprom to 32 bits to reserve blocks for future features * start documentation of haptic feedback * change keycode per comment from reviewers * typo fixes * added eeprom for solenoid configs * added solenoid and docs * Add/fix default parameters configs, improve docs * more doc cleanup * add in solenoid buzz toggle, clean up doc * some fixes for error in compiling solenoid * fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c * fixes for avr side issues * update keymap * fix keymap compile error * fix bugs found during solenoid testing * set pin that is not powered during bootloader * added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
2019-02-15Added APA102 support (#4940)Mikkel Jeppesen
* Fixed pin for RGB * Re-did apa102 stuff * changed to use pincontrol functions * Removed a newline? * Changed to comply with project style
2019-02-13Add Satisfaction75 to QMK, Enable EEPROM on stm32f072 (#5094)Andrew Kannan
* Add stm32f072 base ck4x4 to handwired * add prints * Save these tries * Save changes again * Working hadron oled * OLEd working but ws2812b still iffy: * save another try * Encoder feature + OLED * RTC code * Implement clock setting mode * Whitespace * Encoder hooked up to working LED PWM code * Add missing files * eeprom changes * Save changes * Move i2c master * Move satisfaction75 under cannonkeys * Set proper default folder * Revert some core changes * Undo paved iris changes * Reorganize code for maintainability and prep for new features * Add starting code for clock OLED mode * Clock set mode finished * Add custom encoder modes * Actually add VIA keymap * Gate to only 072 * fix gate for only 072 * Update header guards and includes * Update i2c selection strategy * Update board.c to handle software reset to DFU
2019-02-10cleanupskullY
2019-02-10led_matrix works nowskullY
2019-02-10compiles, but long delay on startup and problemsskullY
2019-02-10The beginning of a simple led matrix driver for is31fl3731skullY
2019-01-28Practice60 RGB and PWM Backlight (#4929)Andrew Kannan
* Update Practice60 to enable RGB via SPI DMA and use PWM backlight breathing * Correct stm32f103c8t6 flash size in eeprom definition * Remove unused files and improve ifdef checks * Update quantum/rgblight.c Co-Authored-By: awkannan <andrew.kannan@klaviyo.com> * Update quantum/rgblight.c Co-Authored-By: awkannan <andrew.kannan@klaviyo.com> * EEPROM implementation fix and updated p60 code * Update define * Remove dead code * Update keymap to remove test key * Update keymap again
2019-01-22Rename i2c_slave functions so it can coexist with i2c_master (#4875)James Churchill
Also merges tx/rx buffers, as only one is necessary.
2019-01-10Adds support for JacoBurge's TouchPad (#4186)Jack Humbert
* add touchpad * progress * working with leds and vibrations * adds readme * Update keyboards/touchpad/readme.md Co-Authored-By: jackhumbert <jack.humb@gmail.com> * updates
2019-01-10Adds Proton C Conversion (#4661)Jack Humbert
* adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-06Final HS60v2 changes. (#4790)yiancar
* initial commit, this now mostly works - RGB controls work - Dynamic keymap still broken due to eeprom - Via works * STM32 eeprom update - Update EEPROM emulation library to handle 8bit data like AVR. - This library also allows for multiple page pairs resulting in greater EEPROM size flexibility * hs60 changes * HS60 hhkb added * Update keyboards/hs60/v2/config.h Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
2018-12-19Also fix use of weak stm32 internal pullupyiancar
2018-12-19Minor STM32 i2c driver cleanupyiancar
2018-12-04adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support ↵ishtob
(#4462) * add initial support for hadron ver3 * add initial support for hadron ver3 * pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display * initial work on OLED using qwiic driver * early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality * moved oled defines to config.h and added ifndef to micro_oled driver * WORKING :D - note, still work in progress to get the start location correct on the 128x32 display. * added equation to automatically calculate display offset based on screen width * adding time-out timer to oled display * changed read lock staus via read_led_state * lock indications fixes * Added scroll lock indication to oled * add support for DRV2605 haptic driver * Improve readabiity of DRV2605 driver. -added typedef for waveform library -added unions for registers * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Fixes for PR * PR fixes * fix old persistent layer function to use new set_single_persistent_default_layer * fix issues with changing makefile defines that broken per-key haptic pulse * Comment fixes * Add definable parameter and auto-calibration based on motor choice
2018-11-10I2C driver docs (#4298)yiancar
* I2C driver docs - Added I2C driver docs. - Changed arm master i2c driver to have a weak i2c_init as it is impossible to account for all possible port configuration in the STM32 world. * Update docs/i2c_driver.md Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy> * Update docs/i2c_driver.md Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy> * Update docs/i2c_driver.md Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy> * Update docs/i2c_driver.md Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy> * GPIO release fix
2018-10-22Remove all of the deprecated RGB definesDrashna Jaelre
Fixes #3641
2018-10-08DC01 updates and I2C avr speed overwrite (#4088)yiancar
* DC01 updates and I2C avr speed overwrite - General updating of DC01 - Made F_SCL define in AVR I2C driver overwritable from config.h * Update drivers/avr/i2c_master.c
2018-09-30RAMA M6-B and IS31FL3218 driver (#4021)Wilba6582
* Initial RAMA M6-B commit. * Moved IS31FL3218 driver, minor cleanups * Refactor, added dynamic keymap. * Added dynamic keymaps to RAMA M6-A * Refactor M6-A and M6-B to use common code. * Formatting * Cleanup * Cleanup * Changes from review
2018-09-27RAMA U80-A, wilba.tech WT60-A, WT65-A, WT80-A, IS31FL3736 driver (#3925)Wilba6582
* Initial commit of RAMA U80-A * Initial commit of RAMA U80-A * Moved IS31FL3736 driver, minor cleanups * Superficial stuff * Review changes * Refactored to use common code.
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-15 05:06:12 +0000