Age | Commit message (Collapse) | Author |
|
* Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards
* Define diode direction for failing boards
* Matching parentheses
* Put onekey diode directions in top level config
|
|
* Dactyl manuform layout optimized for Swedish
* Layers as enum
|
|
(#7519)
* Added my Dactyl Manuform layout
* Added my Dactyl Manuform layout
* finalized key layout, added reset code, no LED yet
* finalized key layout, added reset code, no LED yet
* enabled RGB backlight
* enabled RGB backlight
* enabled RGB backlight
* supporting split rgb
* supporting split rgb
* supporting split rgb
* added media controls
* allowing ctrl/command to fallthrough from mouse layer so we can ctrl scroll to zoom in/out
* addressed PR comments, and make a couple last minute adjustments to the layout, to add in the Forwards Delete keycode
* decreased brightness even more
|
|
* Remove keymap_config extern from default keymaps
* Revert unicode
Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :(
Co-Authored-By: fauxpark <fauxpark@gmail.com>
|
|
* Setup keymaps and userspace for Rishka
* Creates a keymap for Ergodox Ez, bdn9 and Dactyl Manuform 5x6
* Update bdn9 config with suggested change
* Add pragma to other header files
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Updates from review from fauxpark
* Updates from review
Swap to keyboard_post_init, layer_state_t and use layer state for encoder
* Updates from review
Swap to keyboard_post_init, layer_state_t and use layer state for encoder
* Add missing change from review
|
|
* Cleanup rules.mk for 32U4 keyboards, H
* Change some boards incorrectly assumed to be halfkay
|
|
* Match doc layout to actual
Raise and Lower were swapped, and there is no "10" button :)
* Make mouse button 2 really 2, not a clone of MB1
|
|
|
|
|
|
* Added DMOTE as a variant of the Dactyl-ManuForm, with slight changes to
prior code organization to reflect differences.
|
|
|
|
* Update 333fred keymaps and add new iris map.
* Fix iris key
|
|
* Cleanup Default Keymaps to conform to QMK Firmware standards
* Minor fixes
* Revert some changes
|
|
clean-up (#5307)
* Tidy up 5x6.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 5x6
- layout macro had the wrong name in info.json
* Tidy up 5x7.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 5x7
- corrected keyboard height
- layout macro had the wrong name in info.json
* Tidy up 6x6.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 6x6
- layout macro had the wrong name in info.json
|
|
|
|
* handwired dactyl with 2 pro micros added
* dactyl_promicro README updated
* dactyl_promicro default layout fixed
* requested changes
* dactyl_promicro README updated
* qmk toolbox link fixed
* layout reflects phys. keys positions
|
|
|
|
|
|
* Add default value for IS_COMMAND for COMMAND feature
* Cleanup and consistency
* Update Templates to reflect change
* Fix IS_COMMAND in template
* Fix IS_COMMAND define
* Use consistent IS_COMMAND block in templates
* Remove unnecessary `#undef IS_COMMAND` directives
* Fix compile issue on orthodox
* Reomve IS_COMMAND option for newer boards
* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting
* Remove a couple of additional IS_COMMAND defines
* Remove remaining redundant IS_COMMAND definitions
* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin
* Remove multiple empty lines in modified config.h files
* Update additional boards
* Reomve IS_COMMAND from newer boards
* Update Alice keyboard
* Remove IS_COMMAND from additional boards
Jan 24th edition
|
|
* Remove QUANTUM_DIR code blocks from keyboard rules
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.
* remove QUANTUM_DIR code blocks from rules for default keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.
* remove QUANTUM_DIR code blocks from rules for user keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)
* remove QUANTUM_DIR code blocks from rules for community layouts
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.
* remove QUANTUM_DIR code blocks from rules for userspaces
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
|
|
* Document the correct path to the split keyboard EEPROM files
* Document the correct path to the split keyboard EEPROM files
|
|
* add temporary compile test shell script
* add 'CONFIG_H += serial_backward_compatibility.h' into common_features.mk:SPLIT_KEYBOARD block
* add quantum/split_common/serial_backward_compatibility.h
SERIAL_PIN_PORT and other PIN define move to serial_backward_compatibility.h
SERIAL_BACKLIT_START move to split_util.h
* quantum/split_common/serial.c change to helix-serial.c style serial configuration
* add temporary file quantum/split_common/split-keyboards-list.txt
* add '#define SOFT_SERIAL_PIN D0' to keyboards/6lit/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/divergetm2/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/ergotravel/rev1/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/foobar/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/dactyl_manuform/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/handwired/qc60/config.h
* add '//#define SOFT_SERIAL_PIN D0' to keyboards/handwired/xealous/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/iris/rev*/config.h
* add '//#define SOFT_SERIAL_PIN D0' to keyboards/lets_split_eh/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/levinson/rev*/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/miniaxe/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/nyquist/rev?/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/quefrency/rev1/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/qwertyydox/config.h,keyboards/qwertyydox/rev1/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/redox/rev1/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/rorschach/rev1/config.h
* remove '#define SOFT_SERIAL_PIN D0' from quantum/split_common/serial_backward_compatibility.h
* remove temporary file quantum/split_common/split-keyboards-list.txt
* remove temporary compile test shell script
* Revert "remove temporary compile test shell script"
This reverts commit 15b0021b4092127b8d8a21f572642ad3702b46d4.
* update quantum/split_common/compile_split_test.sh for new keyboard test
* add '#define SOFT_SERIAL_PIN D0' to keyboards/diverge3/config.h
* add '#define SOFT_SERIAL_PIN D0' to keyboards/40percentclub/25/config.h
* remove temporary compile test shell script
* update docs/config_options.md, quantum/template/avr/config.h
* fix quantum/template/avr/config.h
* fix typo docs/config_options.md
|
|
different location.
|
|
* handwired/dactyl_manuform/4x5: Configurator support
* handwired/dactyl_manuform/4x6: Configurator support
* handwired/dactyl_manuform/5x6: Configurator support
* handwired/dactyl_manuform/5x7: Configurator support
* handwired/dactyl_manuform/6x6: Configurator support
|
|
Fixes #3641
|
|
|
|
* Added dactyl-manuform 4x6 and keymap.
* Did changes recommended by drashna.
|
|
* dactyl_manuform 5x7 aka Ergodox added
* LAYOUTS = ergodox removed
* README updated
* README updated again
* zip file removed
|
|
* mouse layer keys shifted
* mouse layer keys shifted
* manuform 5x6 added
* mouse layer keys shifted
* manuform 5x6 added
* dactyl_manuform 5x6 keymap added
* reorg. dactyl manuform folder
* removed LAYOUTS = ortho_4x12 for 4x5
* Rows and Cols in config.h fixed
* MASTER_LEFT
* 5x6 matrix fixed
* keymap updated
* removed the i2c, serial, split_util and matrix files and inserted SPLIT_KEYBOARD
* default keymap for dactyl_manuform 5x6
* Fixes for Dactyl Manuform
* Add/update default keymap
* readme dactyl_manuform updated
* links to keymaps added
* dactyl_manuform 6x6 added. README updated
* dactyl_manuform README updated
* cleanup
* more cleanup
|
|
* mouse layer keys shifted
* mouse layer keys shifted
* manuform 5x6 added
* mouse layer keys shifted
* manuform 5x6 added
* dactyl_manuform 5x6 keymap added
* reorg. dactyl manuform folder
* removed LAYOUTS = ortho_4x12 for 4x5
* Rows and Cols in config.h fixed
* MASTER_LEFT
* 5x6 matrix fixed
* keymap updated
* removed the i2c, serial, split_util and matrix files and inserted SPLIT_KEYBOARD
* default keymap for dactyl_manuform 5x6
* Fixes for Dactyl Manuform
* Add/update default keymap
|
|
* mouse layer keys shifted
* mouse layer keys shifted
* manuform 5x6 added
* mouse layer keys shifted
* manuform 5x6 added
* dactyl_manuform 5x6 keymap added
* reorg. dactyl manuform folder
* removed LAYOUTS = ortho_4x12 for 4x5
* Rows and Cols in config.h fixed
* MASTER_LEFT
* 5x6 matrix fixed
* keymap updated
* removed the i2c, serial, split_util and matrix files and inserted SPLIT_KEYBOARD
|
|
* DactylManuform: Updating dvorak keymap
* Changed NAV and NUM layers to LOWER and RAISE
* Removed Mod+Key form RAISE and LOWER keys to be used as layer togglers exclusively
* Added missing keys to LOWER layers
* DactylManuform: fixed bugs in keyboard config file
* DactylManuform: Change default mouse config
The default mouse config parameters are slow and not very user friendly, this commit overrides the default
values.
wq
Signed-off-by: Sameeh Jubran <sameeh.j@gmail.com>
* Dactylmanuform: Update default keymap (qwerty) to match dvorak's
Recently devorak's layout went through some changes for changing layer toggles behavior,
adding missing keys, and fix minor bugs, this commit introduces these changes to the default keymap.
Signed-off-by: Sameeh Jubran <sameeh.j@gmail.com>
* Dactylmanuform: Add permissive hold support
Signed-off-by: Sameeh Jubran <sameeh.j@gmail.com>
* DactylManuform: Updating documentation
* Adding a picture of the keyboard
* Adding keymaps pictures
* Adding missing EEPROM files for EE_HANDS
flashing these before firmware will let the
user use either hand as master without reflashing
Signed-off-by: 20lives <lior@dotcore.co.il>
|
|
* Update default Nyquist revision
* LED slave fix
* Sync changes from lets_split
* Add needed check for debouncing
* Remove line that was setting PD2 pin and interfering with use of that pin
* Add backlight key to keymap
|
|
* Add readme with brief description
Change KEYMAP to LAYOUT
* Add readme.md with brief description
Use LAYOUT macro
* add a readme.md file
* Add readme.md with brief description
Use LAYOUT macro
* Add readme.md with brief description
Use LAYOUT macro
* Fix "Warning: contra: Missing layout pp macro for ['planck_mit', 'planck_grid']",
* Use LAYOUT macro
|
|
* adding new handwired keyboard: dactyl-manuform
* adding qwerty layout
* updating readme file.
|