summaryrefslogtreecommitdiff
path: root/keyboards/helix/rev2/keymaps
AgeCommit message (Collapse)Author
2021-04-04[Keymap] cleanup keyboards/helix/{rev2|rev3_5rows}/keymaps/five_rows (#12259)Takeshi ISHII
* cleanup keyboards/helix/{rev2|rev3_5rows}/keymaps/five_rows * Made the layout data easier to read. * helix/rev2/keymaps/five_rows/keymap.c * helix/rev3_5rows/keymaps/five_rows/keymap.c * The following two were made the same. * keymaps/five_rows/config.h * keymaps/five_rows/oled_display.c The binary of the compilation result has not changed. * update keyboards/helix/rev2/keymaps/five_rows/rules.mk KEYBOARD_LOCAL_FEATURES_MK was moved to the end. * add '#define DISABLE_SYNC_TIMER' into helix/rev3_5rows/keymaps/five_rows/config.h The sync timer features worsen the matrix scan rate of the Helix keyboard. I'm not sure if it makes sense to have sync timer features enabled on the Helix keyboard. So in my keymap I disable this.
2021-02-19[Keymap] Adding fraanrosi keymap. (changes applied) (#11862)Franco Rosi
* Latam version of Helix/rev2/back . Latam adaptation of keymap(whit "ñ") . 3 layers (Qwerty, Lower, Raise) . Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode. (cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7) * Se añade Keymap. * Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente. * Ajustes en mapeo para simplificar. Agrego Mark Down con mapeo. Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo. * Update keymap.md * Rename keymap.md to readme.md * Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía). .Ahora los leds underglow responden mejor. * -Se agrega indicador rgb para el bloq mayús. -Se agrega manejo del rgb_tog. -Se agrega botón para reset(del teclado). -Ajustes de keymap varios. -Limpieza de código. * Update readme.md * Update readme.md * Update readme.md * adding helix-keyboard.png * Update readme.md * -Se agregan Mouse Keys (para manejo del mouse con el teclado). -Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado). * Cambios en el Keymap para mayor comodidad del uso del mouse. * Update readme.md * Update readme.md * -Fixeo de comportamiento del "Bloq. Mayús": Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE. -Ajuste en mapeo: Cambié las mouse keys y las de teclas de brillo. * Update readme.md * Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2. Esto para que el PR solo sea agregar el keymap "fraanrosi". * Quito cambio de helix.h Quito lo que ya no es necesario, para hacer el pull request limpio. * Update Readme.mp * Revert "Update Readme.mp" This reverts commit eb9a2712b0f22b44032f5123227b7bc8af37b89f. * Update readme.md * Clean up, organization, indent fixes * Update readme.md * Latam version of Helix/rev2/back . Latam adaptation of keymap(whit "ñ") . 3 layers (Qwerty, Lower, Raise) . Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode. (cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7) * Se añade Keymap. * Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente. * Ajustes en mapeo para simplificar. Agrego Mark Down con mapeo. Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo. * Update keymap.md * Rename keymap.md to readme.md * Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía). .Ahora los leds underglow responden mejor. * -Se agrega indicador rgb para el bloq mayús. -Se agrega manejo del rgb_tog. -Se agrega botón para reset(del teclado). -Ajustes de keymap varios. -Limpieza de código. * Update readme.md * Update readme.md * Update readme.md * adding helix-keyboard.png * Update readme.md * -Se agregan Mouse Keys (para manejo del mouse con el teclado). -Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado). * Cambios en el Keymap para mayor comodidad del uso del mouse. * Update readme.md * Update readme.md * -Fixeo de comportamiento del "Bloq. Mayús": Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE. -Ajuste en mapeo: Cambié las mouse keys y las de teclas de brillo. * Update readme.md * Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2. Esto para que el PR solo sea agregar el keymap "fraanrosi". * Quito cambio de helix.h Quito lo que ya no es necesario, para hacer el pull request limpio. * Update Readme.mp * Revert "Update Readme.mp" This reverts commit eb9a2712b0f22b44032f5123227b7bc8af37b89f. * Update readme.md * Update readme.md * Clean up, organization, indent fixes * Update readme.md Latam version of Helix/rev2/back . Latam adaptation of keymap(whit "ñ") . 3 layers (Qwerty, Lower, Raise) . Underglow light changes while pressing Lower(BLUE) and Raise(RED), then it returns to prior mode. (cherry picked from commit 974be350115b2d33b55edbc02e3b5281e1f856d7) Se añade Keymap. Agrego un pdf preliminar del mapeo y reubico el keymap a carpeta correspondiente. Ajustes en mapeo para simplificar. Agrego Mark Down con mapeo. Creo carpeta "layers mapping" para guardar lo correspondiente a mapeo. Update keymap.md Rename keymap.md to readme.md Organización en general y cambio de configuración de "back" a "under"(que era la que correspondía). .Ahora los leds underglow responden mejor. -Se agrega indicador rgb para el bloq mayús. -Se agrega manejo del rgb_tog. -Se agrega botón para reset(del teclado). -Ajustes de keymap varios. -Limpieza de código. Update readme.md Update readme.md Update readme.md adding helix-keyboard.png Update readme.md -Se agregan Mouse Keys (para manejo del mouse con el teclado). -Se hace fix en el modo "Bloq. Mayús" (Se persiste el cambio de RGB mode mientras el Bloq. Mayús está activado). Cambios en el Keymap para mayor comodidad del uso del mouse. Update readme.md Update readme.md -Fixeo de comportamiento del "Bloq. Mayús": Cuando se presionaba una Layer mientras estaba activado Bloq. Mayús, quedaba el rgb_mode como el de la capa LOWER o RAISE. -Ajuste en mapeo: Cambié las mouse keys y las de teclas de brillo. Update readme.md Se borra carpeta /rev2_latam, para dejar todo enlatado y andando desde /rev2. Esto para que el PR solo sea agregar el keymap "fraanrosi". Quito cambio de helix.h Quito lo que ya no es necesario, para hacer el pull request limpio. Update Readme.mp Revert "Update Readme.mp" This reverts commit eb9a2712b0f22b44032f5123227b7bc8af37b89f. Update readme.md Clean up, organization, indent fixes Update readme.md * Changes and corrections were made to Pull Request. * Since the last change, readme.md and comment in keymap.c were to be updated.
2020-12-26[Keymap] update rules.mk and config.h of `helix/rev2:five_rows` (#11302)Takeshi ISHII
* update keyboards/helix/rev2/keymaps/five_rows/rules.mk: oled selection, led animation selection * add OLED_UPDATE_INTERVAL support into keyboards/helix/rev2/keymaps/five_rows/oled_display.c Support for OLED_UPDATE_INTERVAL, even for older types of OLED tasks. * Add 'HELIX=debug/no-debug' option into 'helix/rev2/keymaps/five_rows/rules.mk'
2020-12-20[Keymap] fix keyboards/helix/rev2/keymaps/default/oled_display.c (#11228)Takeshi ISHII
Fixed the OLED display on the right side as it was showing some garbage. 右側のOLEDディスプレイにゴミが表示されていたのを修正しました。
2020-12-16Normalise include statements in keyboard code (#11185)Ryan
2020-12-15[Keymap] Helix default keymap oled update (#11152)MakotoKurauchi
* update keyboards/helix/rev2/local_features.mk - Improved parsing of the `HELIX =` option * add 'is_mac_mode()' into keyboards/helix/rev2/rev2.c * update helix/rev2/keymaps/default/keymap.c: use rgblight query functions * Makes the OLED driver used by the helix:default keymap switchable. * use TOP/drivers/oled/oled_driver.c `make helix:default` or `make OLED_SELECT=core helix:default` * use helix/local_drivers/ssd1306.c `make OLED_SELECT=local helix:default` * Separated the OLED related code from keymap.c and moved it to oled_display.c. * Change the 'led_test' keymap to follow the changes in the 'default' keymap. * update helix/rev2/keymaps/default/oled_display.c * add '#define OLED_UPDATE_INTERVAL 50' into keyboards/helix/rev2/config.h * Support for OLED_UPDATE_INTERVAL, even for older types of OLED tasks * add readme.md for helix/rev2 * Apply drashna's suggestions to rev2.c. * Apply drashna's suggestions to rev3_4rows.c, rev3_5rows.c. Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
2020-11-282020 November 28 Breaking Changes Update (#11053)James Young
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-17[Keymap] clean up helix:five_rows keymap (#10866)Takeshi ISHII
* Makes the OLED driver used by the helix:five_rows keymap switchable. * use TOP/drivers/oled/oled_driver.c `make HELIX=stdole helix:five_rows` * use helix/local_drivers/ssd1306.c `make HELIX=oled helix:five_rows` * Separated the OLED related code from keymap.c and moved it to oled_display.c. * scan rate without OLED * make HELIX=verbose,dispoff,scan helix/rev2:five_rows use Helix original code text data bss dec hex filename 18880 58 235 19173 4ae5 .build/helix_rev2_five_rows.elf matrix scan frequency: 1590 * make HELIX=verbose,dispoff,scan,sc helix/rev2:five_rows use split_common code text data bss dec hex filename 18554 40 231 18825 4989 .build/helix_rev2_five_rows.elf matrix scan frequency: 1202 * scan rate with helix/local_drivers/ssd1306.c * make HELIX=verbose,dispoff,scan,oled helix/rev2:five_rows use Helix original code text data bss dec hex filename 24048 196 342 24586 600a .build/helix_rev2_five_rows.elf matrix scan frequency: 739 * make HELIX=verbose,dispoff,scan,sc,oled helix/rev2:five_rows use split_common code text data bss dec hex filename 23750 176 338 24264 5ec8 .build/helix_rev2_five_rows.elf matrix scan frequency: 642 * scan rate with drivers/oled/oled_driver.c * make HELIX=verbose,dispoff,scan,stdole helix/rev2:five_rows use Helix original code text data bss dec hex filename 24590 210 798 25598 63fe .build/helix_rev2_five_rows.elf matrix scan frequency: 293 * make HELIX=verbose,dispoff,scan,sc,stdole helix/rev2:five_rows use split_common code text data bss dec hex filename 24290 190 794 25274 62ba .build/helix_rev2_five_rows.elf matrix scan frequency: 277 * clean up helix/rev2/keymaps/five_rows/keymap.c * update five_rows/oled_display.c * update helix/rev2/keymaps/five_rows/keymap.c: remove LAYOUT_kc() * Ported the keymap from helix/rev2:five_rows to helix/rev3_5rows:five_rows. * update five_rows/oled_display.c * add License comment
2020-08-29Better handle LTO_ENABLE (#9832)Drashna Jaelre
* Better handle LTO_ENABLE Especially when calling from command line * Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE * Remove long for LTO from show_options.mk
2020-06-15[Keymap] Add froggy keymap with 106/109 (JP) settings for helix keyboard (#8967)MURAMATSU Atshshi
* initial commit for froggy 106 key mode * add mode indicator on OLED * use #pragma once instead of include guard * remove unusable codes * remove audio codes, because helix rev.2 has no audio feature * use set_single_persistent_default_layer * remove eeprom update check
2020-05-25[Keymap] update helix/rev2:yshrsmz keymap (#9047)Yasuhiro SHIMIZU
* update helix keymap * use set_single_persistent_default_layer
2020-05-05Xulkal Changes (#9004)XScorpion2
* Xulkal Changes * Fixing alt keymap
2020-04-11[Keymap] fix OLED display on Helix keyboard keymaps default and… (#8737)Takeshi ISHII
Since #7773, the mode number of RGBlight is no longer displayed on the Helix OLEDs. I fixed this.
2020-03-10[Keyboard] Helix add split common option (#7718)MakotoKurauchi
* is_master, has_usb() move to rev2.[hc] * Do recent helix/rev2 changes to helix/pico as well. helix/pico/matrix.c: remove 'is_master' helix/pico/pico.c: add 'is_master' helix/pico/pico.h: add 'has_usb()' macro helix/pico/split_util.c: remove 'setup_handedness()' 'has_usb()', add 'is_helix_master()' etc * add HELIX=scan option into {rev2/pico}/local_features.mk Made DEBUG_MATRIX_SCAN_RATE easy to use. * Changed rules.mk to link "helix/local_drivers/ssd1306.c" only when OLED_ENABLE = yes. * Added option to use split_common for helix/rev2, helix/pico keyboard. how to build: ### build helix/pico (HelixPico) with helix current codes $ make helix/pico:KEY_MAP $ make helix/pico/back:KEY_MAP ### build helix/rev2 (Helix or Helix beta) with helix current codes $ make helix:KEY_MAP $ make helix/rev2/back:KEY_MAP $ make helix/rev2/under:KEY_MAP $ make helix/rev2/oled:KEY_MAP $ make helix/rev2/oled/back:KEY_MAP $ make helix/rev2/oled/under:KEY_MAP ### build helix/pico (HelixPico) with split_common codes $ make helix/pico/sc:KEY_MAP $ make helix/pico/sc/back:KEY_MAP $ make helix/pico/sc/under:KEY_MAP ### build helix/rev2 (Helix) with split_common codes $ make helix/rev2/sc:KEY_MAP $ make helix/rev2/sc/back:KEY_MAP $ make helix/rev2/sc/under:KEY_MAP $ make helix/rev2/sc/oled:KEY_MAP $ make helix/rev2/sc/oledback:KEY_MAP $ make helix/rev2/sc/oledunder:KEY_MAP * add matrix_slave_scan_user() to helix/rev2/rev2.c, helix/pico/pico.h * Changed 'helix:xulkal' to always use split_common and removed ad hoc code. Added the following line to 'helix/rev2/keymaps/xulkal/rules.mk': SPLIT_KEYBOARD = yes Removed the following ad hoc code from 'users/xulkal/custom_oled.c': #if KEYBOARD_helix_rev2 extern uint8_t is_master; bool is_keyboard_master(void) { return is_master; } #endif * add '#define DIODE_DIRECTION COL2ROW' into helix/{rev2|pico}/config.h This commit does not change the build result. * update helix readme * keyboards/helix/readme.md * keyboards/helix/pico/keymaps/default/readme.md * keyboards/helix/rev2/keymaps/default/readme.md Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
2020-03-01Clean up includes for glcdfont headers (#7745)Ryan
* Clean up includes for glcdfont headers * Remove pragma once, most of these are not headers * Missed these
2019-12-03Helix default keymap update (#7465)MakotoKurauchi
* add RGBRST key into helix/pico:default keymap ADJUST layer * update helix/rev2:default keymap's OLED display contents * add RGBRST key to HELIX_ROWS == 4 ADJUST layer * add CAPS key to RAISE, LOWER layer * add layer status display on slave side oled * add RGB LED status display on both side oled * save stack memory size
2019-11-20Remove keymap_config extern from default keymaps (#7399)Drashna Jaelre
* Remove keymap_config extern from default keymaps * Revert unicode Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :( Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-10-16[Keyboard] Cleanup helix rules options (#6952)MakotoKurauchi
* add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-06-05[Keymap] Xulkal changes (#6075)XScorpion2
2019-03-19 Cleanup Default Keymaps (#5442)Drashna Jaelre
* Cleanup Default Keymaps to conform to QMK Firmware standards * Minor fixes * Revert some changes
2019-03-09Update edvorak keymap simplify (#5350)epaew
* Update edvorakjp layouts * swap master hand * update tapping_term
2019-02-18Update Helix 'led_test' keymapmtei
Change to use keyboard_post_init_user() hook (#3113)
2019-02-17Remove redundant KC_TRNS and KC_NO fillers in remaining keymaps (#5154)fauxpark
2019-02-16Remove redundant KC_TRNS and KC_NO fillers in default keymaps (#5152)fauxpark
2019-01-04Remove deprecated QUANTUM_DIR code blocks from makefiles (#4754)noroadsleft
* Remove QUANTUM_DIR code blocks from keyboard rules This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect entire keyboards. * remove QUANTUM_DIR code blocks from rules for default keymaps This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect default keymaps. * remove QUANTUM_DIR code blocks from rules for user keymaps This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect "user" keymaps. (It's actually any keymap that isn't named `default`.) * remove QUANTUM_DIR code blocks from rules for community layouts This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files for community layouts. * remove QUANTUM_DIR code blocks from rules for userspaces This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files for userspaces.
2018-12-18Keymap: Changed to use LAYOUT_kc() macro instead of LAYOUT() macro for easy ↵Takeshi ISHII
maintenance. (#4676)
2018-12-09Keymap: Fixed a problem with underglow with froggy keymap (#4580)MakotoKurauchi
2018-11-27Remove RGB_SMOD alias and replace uses with RGB_MOD (#4319)Konstantin Đorđević
2018-11-26Keymap: Refactor edvorakjp user library (#4480)epaew
* Refactor edvorakjp user library * add tap dance support * update keymaps * edvorakjp: add SWAP_SCLN option * fix behavior of SWAP_SCLN
2018-10-22Replace outdated RGB/Audio informationDrashna Jaelre
2018-10-22Keyboard: Helix serial.c, split_scom.c bug fix and update (#4191)Takeshi ISHII
* helix/serial.c add support PD1,PD3,PE6 and configuration simplify * Add comment about ATmega32U4 I2C * Add compile time check for ATmega32U4 I2C * change TAB code to 8 SPACE code * Helix serial.c PORTD,PD0 test. OK OK PD0 - PD1 OK PD2 - PD3 - PE6 * Helix serial.c PORTD,PD1 test. OK OK PD0 OK PD1 OK PD2 - PD3 - PE6 * Helix serial.c PORTD,PD3 test. OK OK PD0 OK PD1 OK PD2 OK PD3 - PE6 * Helix serial.c PORTE,PD6 test. OK OK PD0 OK PD1 OK PD2 OK PD3 OK PE6 * Helix serial.c: PD0,PD1,PD3,PE6 all test end * Helix serial.c: rename SOFT_SERIAL_PORT to SOFT_SERIAL_PIN * Helix serial.c add debug code * Helix serial.c: add transaction ID range check * Helix serial.c debug code update * Helix serial.c debug code update * Helix serial.c: Strict checking of the value of tid. * adjust the delay of serial.c * Helix serial.c: remove debug code * remove EXTRAFLAGS += -DCONSOLE_ENABLE from five_rows/rules.mk tmk_core/common.mk has >ifeq ($(strip $(CONSOLE_ENABLE)), yes) > TMK_COMMON_DEFS += -DCONSOLE_ENABLE * Fix error handling in split_scomm.c * add some comment to serial.c * add some comment about SELECT_SOFT_SERIAL_SPEED
2018-10-10Keymaps: Helix rgblight mode update (#4091)MakotoKurauchi
* Helix each keymap's using rgblight mode symbol instead magic number No change in build result. * Helix pico keymaps: make rgblight modes selectable. No change in build result. * Helix rev2 keymaps: make rgblight modes selectable. No change in build result. * fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT) * Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h.
2018-10-05Keyboard: Helix five_rows keymap reduced size (#4082)Takeshi ISHII
* add PERMISSIVE_HOLD in helix:five_rows/config.h * add Eucalyn char layout into helix:five_rows * Helix five_rows keymap: make rgblight modes selectable. No change in build result. * fix keymap.c map comment, add console compile option No change in build result. * Helix five_rows keymap: reduced the size.
2018-09-29Helix led_test keymap reduce size (#4023)Takeshi ISHII
* Helix: make rgblight modes selectable. No change in build result. * edit the comment of helix/rev2/keymaps/default/keymap.c * Helix led_test keymap: reduced the size.
2018-09-29Keymap: Fixed a possible of buffer overflow. (#4016)marksard
Update inline funnction to static inline function. Fixed error of if enabe ADJUST_MACRO_ENABLE.
2018-09-09Keymap: remove unnecessary readme from my helix keymap (#3860)Yasuhiro Shimizu
2018-09-01Keymap: add yshrsmz keymaps (#3770)Yasuhiro Shimizu
* add ergo42 keymap * add helix keymap * add keymap for lets_split * Add keymap for nyquist * update keymaps to address review comments - remove unneeded include - use `#pragma once`
2018-08-15Keymap: Helix : Update froggy keymap (#3652)MakotoKurauchi
* led ripple effect * fix key name
2018-08-10Keyboard: Helix serial improvements (#3608)MakotoKurauchi
* add change_reciver2sender()/change_sender2reciver() This is a change to improve readability. * txled, rxled off in matrix_init() * add serial_send_packet() / serial_recive_packet() This is a change to reduce object size. * add serial_low() at ISR() top * add __attribute__((always_inline)) to some functions * modify serial_send_packet()/serial_recive_packet() A little, object size reduction. A little, speedup. * add debug code to helix/serial.c * Adjust sampling timing of serial signal being received * add split_scomm.c/split_scomm.h and change serial.c/serial.h serial.c was divided into 2 layers, split_scom.c and serial.c. The upper layer split_scomm.c is called from matrix.c. The lower layer serial.c accesses the hardware. * add split_scomm.c/split_scomm.h into helix/rev1 * reduce object size helix/rev2/matrix.c * remove checksum check, add parity check * force occur parity error for test * parity test ok. remove test code * change some comment & add skip code when buffer_size == 0 * serial.c: multiple types of transaction support Add 4 bits transaction-type field at packet top. Select Transaction Descriptor Table entry by transaction-type. * helix serial master-slave transaction optimize Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized. * add debug code for retry * add comment into each config.h * fix ISR status drop * add a debug macro 'debug_retry_chg()' * reduce led_test size * remove debug code from helix/serial.c and etc. * helix:five_rows change TAPPING_TERM value 140 * Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement. - The difference with the original let's split's serial.c - It's high-speed about 4 times. - Stable bi-directional data transfer. (Helix need master to slave transfer) - serial.h was divided 2 files, serial_config.h and sereial.h - With multiple types of transaction support, communication contents can be optimized. (NEW flexible API) - USE OLD Simple APIs (compatible with let's split serial.c) - files : - serial_config.h -- hardware configuration (need include by config.h) - serial.c/serial.h -- serial communication - USE NEW flexible APIs. (Support multi-type transaction function.) serial.c was divided into 2 layers, split_scom.c and serial.c. The upper layer split_scomm.c is called from matrix.c. The lower layer serial.c accesses the hardware. - files - split_scomm.c -- communication buffer is defined in here. call by matrix.c. - split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c - serial_config.h -- hardware configuration (need include by config.h) To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION - serial.c/serial.h -- serial communication lower layer - NEW APIs for serial.c / serial.h (The lower layer) // Soft Serial Transaction Descriptor typedef struct _SSTD_t { uint8_t *status; uint8_t initiator2target_buffer_size; uint8_t *initiator2target_buffer; uint8_t target2initiator_buffer_size; uint8_t *target2initiator_buffer; } SSTD_t; // initiator is transaction start side void soft_serial_initiator_init(SSTD_t *sstd_table); // target is interrupt accept side void soft_serial_target_init(SSTD_t *sstd_table); int soft_serial_transaction(int sstd_index); int soft_serial_get_and_clean_target_status(int sstd_index); - NEW APIs for split_scomm.c / split_scomm.h (The upper layer) move from old serial.c the following buffer and functions serial_slave_buffer[] serial_master_buffer[] void serial_master_init(void) void serial_slave_init(void) int serial_update_buffers(void) define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
2018-08-02Keymap: refactoring and modifief to helix five rows jis (#3552)marksard
* display of LED mode * refactoring * modified a keymap * use extra jp header
2018-08-02Keyboard: fixed build break (size overflow) HelixPico with Backlight or ↵Takeshi ISHII
Underglow (#3546) * build break fix for HelixPico * add customize variable 'Link_Time_Optimization' into rev2 and pico keymaps rules.mk * "CFLAGS += -flto" change to "EXTRAFLAGS += -flto" * add USE_Link_Time_Optimization macro
2018-07-23Keymap: Refactor helix keymap based on changes to default keymap (#3469)marksard
2018-07-16Keymap: Modified of 'Helix five rows JIS" keymap (#3425)marksard
* Change key layout in raise-layer. * Improvement update cycle to mouse key changes. * Update the readme.md
2018-07-12Helix config refine (#3374)MakotoKurauchi
* helix config.h refine
2018-07-08Add edvorakjp keymap for the Helix (rev2) keyboard (#3340)epaew
* add readme.md * add extern declaration of edvorakjp_config to edvorakjp.h * add oled.c * add layout definitions * add keymap.c * add rules.mk * fix rgblight issue: rgblight_setrgb() ignore RGBLIGHT_LIMIT_VAL
2018-07-03Update Helix 'led_test' keymap (#3292)Takeshi ISHII
* now helix led_test local rgblight.[ch] not use. remove. * greatly simplify keyboards/helix/rev2/keymaps/led_test/keymap.c Helix keymap 'led_test' use modified default/keymap.c
2018-07-01Helix five rows jis (#3274)marksard
* Added keymap for Helix like Japanese JIS keyboard. * * Refactored * Supported to display of exchange layer
2018-06-30Helix shrink config (#3268)MakotoKurauchi
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL * add define USB_MAX_POWER_CONSUMPTION * Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk rules.mk: add 4 Variables for compile control. # Helix keyboard customize # you can edit follows 4 Variables # jp: 以下の4つの変数を必要に応じて編集します。 OLED_ENABLE = no # OLED_ENABLE LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.) LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) LED_ANIMATIONS = yes # LED animations config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define * HELIX_ROWS define move from config.h to rules.mk * add readme.md * rename readme.md to readme_jp.md * add readme.md and modify readme_jp.md * change helix/ssd1306.c for select glcdfont.c position * add variable LOCAL_GLCDFONT into each keymaps rules.mk * Add iPhone/iPad LED support to Helix default keymap * renumber _ADJUST for shrink program size * Fix Helix i2c wrong bit rate * add helix serial debug code * serial debug macro move from config.h to serial.h * helix serial.c debugging... * refine debug macros * add some comments * add SELECT_SERIAL_SPEED * add comments * debugging sync_send/sync_recv * add very high speed * fix sync_send/sync_recv * fix com. start and switch send/recv * debug mode off * remove debug codes * Shrinked config.h
2018-06-27Helix: Refactor and Configurator support (#3238)noroadsleft
* Matrix refactor * Keymap refactor * Configurator support
2018-06-21Fix Helix i2c wrong bit rate (#3207)MakotoKurauchi
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-28 14:23:45 +0000