Age | Commit message (Collapse) | Author |
|
|
|
|
|
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
|
|
|
|
|
|
|
|
* Initial attempt at allowing keyboards to indicate what features they do not support
* try to use a for loop instead
* Update disable_features.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add a few more features
* remove my test fixture
* disable things that make all:all suggested"
Co-authored-by: Zach White <skullydazed@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
|
|
|
|
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
|
|
This is the recommendation in the [PR
Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it
will make working with them easier in the CLI/API/etc.
|
|
* via support
* Removing backspaces from jj40 keymap.c
* Updating jj40/via/rules.mk
|
|
Co-authored-by: Alvaro <afmuente@outlook.com>
|
|
|
|
* jj28 (jj40 SuperMicro) update
* Update keyboards/jj40/keymaps/stevexyz/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
* removed jpegs
* Update keyboards/jj40/keymaps/stevexyz/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/jj40/keymaps/stevexyz/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/jj40/keymaps/stevexyz/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: stevexyz <warste@removethisandleavegoogle.com>
Co-authored-by: Joel Challis <git@zvecr.com>
|
|
|
|
* V-USB: Use structs for USB descriptors
* Update usbconfigs
* cformat pass
|
|
* V-USB: Use manufacturer and product strings from config.h
* Update board configs
|
|
|
|
|
|
* Remove custom backlight code for PS2AVRGB boards
* Remove custom driver setting
* BACKLIGHT_BREATHING goes in config.h, not here
* Don't need to include backlight.c again here either
* Turn on backlight for Canoe
* Disable console on a few boards due to oversize
|
|
* Remove custom matrix from PS2AVRGB boards
* Add custom backlight.c to SRC for bminiex, for now
* Add missing DIODE_DIRECTIONs
|
|
* Update atmega32a readme files to match template
* Update atmega32a readme files to match template - fixes
* Apply suggestions from code review
|
|
* Update default keymaps to use `layer_state_t`
* Convert binon32 as get_highest_layer in default keymaps
|
|
|
|
* Add support for custom polling interval and power usage on V-USB boards
* Use 1ms as default for now
|
|
* Refactor ps2avrgb i2c ws2812 to core
* Refactor jj40 to use ws2812 i2c driver
* Refactor ps2avrgb template to use ws2812 i2c driver
* Add ws2812 stub files
* clang-format and driver config
* Add ws2812 driver docs
* Fix default config values
* Update tmk_core/protocol/vusb/main.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
|
|
|
|
simplicity and power (#6599)
|
|
* removes gamelayer, finally got rgb working
* lowercasing readme
* changed to layout_ortho_4x12
* rules.mk: Removed BACKLIGHT_CUSTOM_DRIVER
|
|
* Add JJ40 Cockpit keymap
* Fix lower layer symbols
* Improve documentation JJ40 Cockpit
* Add screen backlight controls jj40:cockpit
* Update docs jj40:cockpit
|
|
|
|
* Refactor jj40 in line with current ps2avrgb template
* Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID
* Add backlight pwm bodge till #4324 lands
* Increase planck keymap compatibility
|
|
* Remove duplicate 'program' files and refactor to use atmega32a_program.py
* Update readme references from 'program' to 'atmega32a_program.py'
|
|
* Relocate usb_detach to utils
* Relocate usb_detach to utils - fix up files after move
|
|
|
|
* Update README.md
* Update README.md
* Update README.md
* Update README.md
|
|
* Add default value for IS_COMMAND for COMMAND feature
* Cleanup and consistency
* Update Templates to reflect change
* Fix IS_COMMAND in template
* Fix IS_COMMAND define
* Use consistent IS_COMMAND block in templates
* Remove unnecessary `#undef IS_COMMAND` directives
* Fix compile issue on orthodox
* Reomve IS_COMMAND option for newer boards
* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting
* Remove a couple of additional IS_COMMAND defines
* Remove remaining redundant IS_COMMAND definitions
* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin
* Remove multiple empty lines in modified config.h files
* Update additional boards
* Reomve IS_COMMAND from newer boards
* Update Alice keyboard
* Remove IS_COMMAND from additional boards
Jan 24th edition
|
|
|
|
* Remove QUANTUM_DIR code blocks from keyboard rules
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.
* remove QUANTUM_DIR code blocks from rules for default keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.
* remove QUANTUM_DIR code blocks from rules for user keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)
* remove QUANTUM_DIR code blocks from rules for community layouts
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.
* remove QUANTUM_DIR code blocks from rules for userspaces
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
|
|
|
|
* Deleted LAYOUTS = planck_grid from rules.mk
* Refactor
* Configurator support
* Fixed offset layout matrix macro
* Readded LAYOUT_kc_ortho_4x12 matrix alias
* Refactor: rename LAYOUT_offset_right macro as LAYOUT_planck_1x2uR
|
|
|
|
* Update jj40 keymap for easier pgup/pgdn
* Backlight problem fixed by a previous commit
|
|
* Remove chording as it is not documented, not used, and needs work.
* Make Leader Key an optional feature.
* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`
* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
|
|
|
|
(#3453)
* Add M6-A keymap
* Update XD60 keymap
* Update XD60 keymap readme
* Update JJ40 and Let's Split keymaps
* Add readme for M6-A
* Fix typo, update JJ40 README
* Update jj40 readme
* Cleanup jj40 keymap
* Revert Let's Split QWERTY layer to default before #2010
* Update numpad layers
* Fix: Let's Split keymap getting stuck mods due to having keycodes assigned on the Raise layer
* Keep ASCII art consistent with keymap
* Staryu: initial port
* Add personal keymap
* Added and updated READMEs
* Fix: default keymap for staryu
* Rudimentary backlight support.
* Enabled mousekeys for default keymap
* use QMK_KEYBOARD_H and LAYOUT
* Update readme.md for NIU mini: flash using avrdude
* Fix missing linebreaks for Staryu README
* Update readme.md
* Update PS2AVRGB boards with new matrix.c
* Update canoe matrix.c; untested
* Fix canoe.c for building (needs matrix_scan_user and matrix_init_user)
* Add personal Iris keymap
* Update keymap
* Update keymap
* Update keymap, disable backlighting and underglow
* Move PrintScreen button
* Add README
* Update personal keymaps
* Add INS key
* Limit USB max power consumption, change Fn to MENU
* Remove Numpad layer (easy to accidentally toggle)
* Fix backlighting for ps2avrgb
* Update comments to refer to actual pin naming
* Possible fix for xyverz ortho keymap: define RGBLED_NUM
* Make led_set_user in backlight.c overridable
* Add changes to address points raised in code review, untested (don't have build env right now)
|
|
|
|
|
|
* Adjust TAPPING_TERM to make accessing the nav layer easier
* JJ40: Add RESET key to lower layer.
* Disable all lock LEDs on "oscillope" keymap.
I'm not 100% sure why yet, but attempting to turn on a lock LED on my v1
JJ40 PCB causes the PCB to become unresponsive. The easy fix is to just
disable all of the lock LEDs, since I don't have any LEDs on my keyboard
anyway.
Many thanks to u/wanleg on Reddit for suggesting this fix: https://www.reddit.com/r/olkb/comments/8en8f1/strange_caps_lock_behavior/e06kcaf/
|
|
script (#2992)
* Add M6-A keymap
* Update XD60 keymap
* Update XD60 keymap readme
* Update JJ40 and Let's Split keymaps
* Add readme for M6-A
* Fix typo, update JJ40 README
* Update jj40 readme
* Cleanup jj40 keymap
* Revert Let's Split QWERTY layer to default before #2010
* Update numpad layers
* Fix: Let's Split keymap getting stuck mods due to having keycodes assigned on the Raise layer
* Keep ASCII art consistent with keymap
* Staryu: initial port
* Add personal keymap
* Added and updated READMEs
* Fix: default keymap for staryu
* Rudimentary backlight support.
* Enabled mousekeys for default keymap
* use QMK_KEYBOARD_H and LAYOUT
* Update readme.md for NIU mini: flash using avrdude
* Fix missing linebreaks for Staryu README
* Update readme.md
* Update PS2AVRGB boards with new matrix.c
* Update canoe matrix.c; untested
* Fix canoe.c for building (needs matrix_scan_user and matrix_init_user)
* Add personal Iris keymap
* Update keymap
* Update keymap
* Update keymap, disable backlighting and underglow
* Move PrintScreen button
* Add README
|