summaryrefslogtreecommitdiff
path: root/keyboards/xd75
AgeCommit message (Collapse)Author
2021-08-06Remove Full Bootmagic (#13846)James Young
* disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-07-19[Bug] Develop - Change uint32_t to layer_state_t (#13596)Xelus22
* fix sat75 * update uint32_t to layer_state
2021-07-06`keymap_extras`: Remove deprecated defines (#12949)Ryan
2021-07-03Merge remote-tracking branch 'upstream/master' into developfauxpark
2021-07-02[Keymap] Update personal keymaps, add Corne keymap, and update non-kc LAYOUT ↵David Rambo
for Iris (#12273) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-06-30Remove `API_SYSEX_ENABLE`s from rules.mk (#13389)Ryan
2021-05-292021 May 29 Breaking Changes Update (#13034)James Young
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-04-12Change `BOOTMAGIC_ENABLE=yes` to use Bootmagic Lite (#12172)James Young
2021-01-20Merge remote-tracking branch 'origin/master' into developQMK Bot
2021-01-20Remove `DESCRIPTION`, W-Z (#11633)Ryan
2021-01-11Remove unused `action_get_macro()` usages in user files (#11165)Ryan
2020-12-11Add XD75am as supported in XD75 readme (#11170)David Heck
2020-11-282020 November 28 Breaking Changes Update (#11053)James Young
* Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-10-03add info.json for XD75 keyboard (#10523)Simon
Currently the XD75 is missing a info.json attributing to non standardised use of QMK
2020-10-01xd75re Multi-layer keymap (#10499)Tom Swartz
Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-08-29Bigger combo index (#9318)Pete Sevander
* Add change log * Change combo index from uint8_t to uint16_t
2020-06-30Add VIA support on XiuDi (XD) keyboards (#8829)Xelus22
Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2020-06-17[Keymap] new keymap for XD75 (#8675)Hybrid
Co-authored-by: grousselle <grousselle@WX-OR6215570.ad.francetelecom.fr>
2020-06-10XD75 clanghans layout (#9313)clanghans
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-05-15[Keymap] Added the K.O,Y layout for the xd75 and atreus62 boards (#9079)Paul Scheikl
* added koy layout to qmk on xd75 board * added koy keymap for the atreus62 board * reduced time for autoshift * added documentation * changed layer 7 to a tap toggle and adjusted mouse speed a little * Update keyboards/xd75/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h * Update keyboards/xd75/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h * Update keyboards/xd75/keymaps/ScheiklP/koy_common.h * Update keyboards/atreus62/keymaps/ScheiklP/koy_common.h * Update keyboards/atreus62/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h * Update keyboards/atreus62/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h * changed keymap to lowercase name to conform with qmk guidelines * Update keyboards/xd75/keymaps/scheiklp/rules.mk remove unnecessary rules * Update keyboards/atreus62/keymaps/scheiklp/rules.mk remove unnecessary rules * moved common files for koy layouts to the users folder and removed empty file * Update keyboards/atreus62/keymaps/scheiklp/keymap.c * Update keyboards/xd75/keymaps/scheiklp/readme.md * Update keyboards/xd75/keymaps/scheiklp/readme.md * Update keyboards/atreus62/keymaps/scheiklp/readme.md * Update keyboards/atreus62/keymaps/scheiklp/readme.md
2020-05-02Formatting (#8981)buzzlighter1
2020-04-30BACKLIGHT_ON_STATE config.h fixes (#8862)Ryan
2020-04-28A few final edits to the keymap and readme. (#8845)Drashna Jaelre
* A few final edits to the keymap and readme. * Update keyboards/xd75/keymaps/buzzlighter1/readme.md Co-Authored-By: Joel Challis <git@zvecr.com> * Update keyboards/xd75/keymaps/buzzlighter1/readme.md Co-Authored-By: Joel Challis <git@zvecr.com> * Update keyboards/xd75/keymaps/buzzlighter1/readme.md Co-Authored-By: Joel Challis <git@zvecr.com> * Update keyboards/xd75/keymaps/buzzlighter1/readme.md Co-Authored-By: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>
2020-04-28[Keymap] Added Xd75 and viterbi keymaps,refactored my userspace. (#8776)Eric Gebhart
2020-04-25Update keyboards/xd75/keymaps/buzzlighter1/readme.mdbuzzlighter1
Co-Authored-By: Joel Challis <git@zvecr.com>
2020-04-25Update keyboards/xd75/keymaps/buzzlighter1/readme.mdbuzzlighter1
Co-Authored-By: Joel Challis <git@zvecr.com>
2020-04-25Update keyboards/xd75/keymaps/buzzlighter1/readme.mdbuzzlighter1
Co-Authored-By: Joel Challis <git@zvecr.com>
2020-04-18Update keyboards/xd75/keymaps/buzzlighter1/readme.mdbuzzlighter1
Co-Authored-By: Joel Challis <git@zvecr.com>
2020-04-18A few final edits to the keymap and readme.buzzlighter1
2020-03-14added olkb_style layout for XD75 (#8409)NeoTheFox
* added olkb_style layout for XD75 * removed unnecessary config.h * cleaned up empty functions * refactored fuction type for clarity * renamed the layout
2020-03-04[Keymap] Adding the 4sStylZ xd75 (#8285)James Young
* Adding the 4sStylZ xd75 * Update keyboards/xd75/keymaps/4sstylz/keycodes.h * Apply suggestions from code review
2020-02-19[Keymap] Keymap for XD75 with 7U spacebar EN-RU gamers (#8184)buzzlighter1
* Create readme.md * Create keymap.c * Create config.h * Create rules.mk * Create layers.json * Update keyboards/xd75/keymaps/buzzlighter1/keymap.c * Update keyboards/xd75/keymaps/buzzlighter1/keymap.c * Delete layers.json
2020-01-30[Keymap] add new keymap (xd75 atomic style japanese layout) (#7944)itakashiski
* init jp * update * update * update * update * Update keyboards/xd75/keymaps/atomic_style_jp/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * remove config.h * remove ____T___ Co-authored-by: Drashna Jaelre <drashna@live.com>
2020-01-31Trim firmware size changes from default rules.mk, part 4 (#8046)ridingqwerty
* Trim firmware size changes from default-ish rules.mk files * Trim sizes from westfoxtrot boards
2019-10-29Cleanup rules.mk for 32U4 keyboards, T-Z (#7190)fauxpark
* Cleanup rules.mk for 32U4 keyboards, T-Z * Use atmel-dfu in place of lufa-ms until it exists
2019-10-08[Keymap] Adding my keymaps for Preonic and XD75 (#6874)Pittyolo
* Added my keymaps * Update to readmes * Update keyboards/preonic/keymaps/pitty/config.h Thanks! Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/preonic/keymaps/pitty/config.h Thanks! Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/preonic/keymaps/pitty/config.h Thanks! Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update config.h * Update keyboards/preonic/keymaps/pitty/keymap.c Thanks! Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Removed copyrighted material * Update keyboards/xd75/keymaps/pitty/keymap.c Thanks! Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update config.h * Update config.h * Update config.h * Update keymap.c * Update keymap.c * Update config.h * Update keymap.c * Update keyboards/preonic/keymaps/pitty/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/preonic/keymaps/pitty/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
2019-09-27[Keymap] Personal xd75 keymap "Odyssey" (#6830)Flutterlice
2019-09-14[Keymap] Yet another xd75 keymap (#6734)xster
* add a keymap for xd75 * add colors, change some keys, add reactive modifier hold, key press * add readme * permissive hold
2019-08-14[Keymap] Xd75 bulbizarre keymap (#6525)Vince Gellár
* Added Bulbizarre keymap for the XD75 * Fixed no newline at the end of file * Update keyboards/xd75/keymaps/bulbizarre/readme.md Co-Authored-By: MechMerlin <30334081+mechmerlin@users.noreply.github.com> * Update led status check Co-Authored-By: fauxpark <fauxpark@gmail.com> * Remove unnecessary define Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-07-30Update msiu's xd75 keymap README to be accurate (#6443)Mark Stosberg
2019-07-16Remove commented out MCUs in rules.mk (#5884)fauxpark
2019-06-06Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997)Drashna Jaelre
2019-06-03[Keymap] Create Boy_314's Canoe layout, small update on xd75 layout (#6060)Boy_314
* create canoe layout, update caps lock on xd75 layout * added readme * fixed copyright comments
2019-04-19Update XD75 keymap by markus (#5651)Markus Weimar
2019-04-02[Keymap] Minor update to my XD75 keymap (#5531)David Rambo
* Updated iris, planck, and xd75 keymaps * Added brightness down and up to commented layout of Symbol layer. * updated config files for planck and iris * removed unnecessary include lines from iris and planck config files * updated XD75's PC layer and its NAVPC toggle layer * fixed typo in alias declaration for C_BSPS * changed alias names for BSPC toggle keys
2019-03-30[Keymap] Updated my iris, planck, and xd75 keymaps (#5515)David Rambo
* Updated iris, planck, and xd75 keymaps * Added brightness down and up to commented layout of Symbol layer. * updated config files for planck and iris * removed unnecessary include lines from iris and planck config files
2019-03-26[Keymap] adding keymaps (#3583)martinmksiu
* add key map * QWERTY with 40% layers * updated line 21 updated line 21 from "#include "xd75.h" to "#include QMK_KEYBOARD_H" as requested * upload contra folders * Update .directory * Update config.h * Update config.h * Update keymap.c * Update config.h * Update rules.mk * Update keyboards/contra/keymaps/martin_bac/config.h Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Update keyboards/xd75/keymaps/martin_cennum/config.h Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Delete .directory * upload * Delete rules.mk * Update keyboards/contra/keymaps/msiu/config.h Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Update keyboards/katana60/keymaps/msiu/config.h Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Update keyboards/katana60/keymaps/msiu/config.h Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Update keyboards/katana60/keymaps/msiu/config.h Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Update keyboards/katana60/keymaps/msiu/config.h Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Delete nano.save * Delete rules.mk * Update keymap.c * Update keymap.c * Update config.h * Update keyboards/lets_split_eh/keymaps/msiu/keymap.c Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Update keyboards/lets_split_eh/keymaps/msiu/keymap.c Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Update keymap.c * Update keyboards/planck/keymaps/msiu/config.h Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Apply suggestions from code review Co-Authored-By: martinmksiu <martinmksiu@gmail.com> * Update keymap.c * Update readme.md * Update keymap.c
2019-03-17[Keyboard] XD75 refactor (#5420)noroadsleft
* Refactor layout macro names Update the names of the layout macros to reflect QMK's desired usage. - KEYMAP renamed to LAYOUT - colinta keymap updated accordingly - KC_KEYMAP renamed to LAYOUT_kc - mtdjr keymap updated accordingly * Update xd75.h to use #pragma once include guard * Update keymaps to use QMK_KEYBOARD_H * Refactor default keymap - updated to use layout macro - remove deprecated action_get_macro function - add functions from QMK keymap.c template - process_record_user - matrix_init_user - matrix_scan_user - led_set_user * Update supporting files - updated config.h files to use #pragma once include guard - remove errant QUANTUM_DIR code block * Rename readme files to fully lowercase filenames * Restructure keyboard readme Updated the readme to better align with the current QMK template. * Bugfixes to supporting files
2019-03-05Adopted LAYOUT, added some keys (#5320)Christopher Browne
* Add HOME/END keys as upper/lower on arrow-up/down * Reduce .hex file size by turning off unneeded options * Put digit keypad onto left hand upon RAISE; this will sometimes be preferable to double-hits of right hand * Latest super latest version merge * cbbrowne keymap for XD75re * starting notes on XD75re keymap plans * First draft of bottom row of QWERTY * Switch my special bottom line over to QCENT * Dunno * Filling in wanted keys, bit by bit... * Add copyright, extra macro * Clean up comments, remove some experimental code I didn't like * TODO plans for xd75re * clean up keyboard layout * QCENT2 is my new experiment for the main keyboard... * Add a few more main layer keys, and modify LOWER to shift things outwards to conform with main layer * Clean up RAISE layer to conform with main layer, remove QCENT layer as QCENT2 is the new thing * More xd75 changes, now that I actually have it in hand * shift keymap around, as original attempt was a bit too aggressive in keeping to the edges * more revs to XD75 * Dropping parts of the centre keypad in favor of Keys I Really Need * Improve documentation to conform with how builds are done now * Improve documentation to conform with how builds are done now * Add cbbrowne rules file as alternative to having the rules in Makefile * Makefile not needed anymore for individual keymap * Some revs to my keymapping * Add {} * Add PGUP/PGDN * Shifted some middle-range keys around * Needed Tilde, Backquote, and to shift RESET onto FUNCTION layer * Wanted ~ * cbbrowne hasn't anything to do with hadron keymaps * trim unneeded bits * I prefer OrgMode for my notes * Have a right-alt * Layer keys make LED colors change * Add sample user rules for cbbrowne * Add source of xd75 rules * Individualized xd75 rules * Adopt LAYOUT to genericize the layout as an ortholinear 5x15 keyboard
2019-02-18Remove CUSTOM_MATRIX option from diode direction (#5090)zvecr
* Remove CUSTOM_MATRIX refs from DIODE_DIRECTION * Remove '#define DIODE_DIRECTION CUSTOM_MATRIX' * Remove CUSTOM_MATRIX refs from DIODE_DIRECTION documentation
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-01 05:29:41 +0000