summaryrefslogtreecommitdiff
path: root/tmk_core
AgeCommit message (Collapse)Author
2019-07-16Extend maximum number of backlight levels to 31 (#6351)fauxpark
2019-07-16Expand bootloader target to support most AVR boards (#6255)Drashna Jaelre
* Update the :bootloader target to pass along correct hardware info * Update make scripts to properly grab the settings (a big thanks to @yanfali) * Remove LUFA debug warnings
2019-07-16Make Caps Lock delay more reasonable (#6199)Drashna Jaelre
* Make Caps Lock delay more reasonable * Update documentation * Update docs/config_options.md Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com> * Update docs/config_options.md Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
2019-07-16Store backlight breathing state in EEPROM (#6105)fauxpark
* Store backlight breathing state in EEPROM * Reduce backlight_config.level from 6 bits to 4 (max 15 "on" levels) * Error out if BACKLIGHT_LEVELS is > 15 * Remove mention of default backlight pin in rules.mk template * Remove pointless comment
2019-07-16Adding rgb matrix speed into eeprom storage. (#5965)XScorpion2
Zeroing out spd in eeconfig_init_quantum Switched to block read & update Update tmk_core/common/eeconfig.h Co-Authored-By: Drashna Jaelre <drashna@live.com> Fixing init compile error Update eeconfig.c Dead / Missing API cleanup alignment
2019-07-15Skip unsupported firmware check message in silent mode (#5765)Drashna Jaelre
2019-07-15add 'objs-size' target into tmk_core/avr.mk (#5490)Takeshi ISHII
2019-07-15Usbasploader bootloader option addition (#6304)yiancar
* Added USBasp bootloader option for USBasploader * author comment * ifdef fix :) * Add usbasp target * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/flashing.md Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-07-11Display firmware size percentage (#6307)fauxpark
2019-07-07Fix chibios so the dfu-suffix is only applied once. (#6270)skullydazed
2019-06-03Fixes compile errors for massdrop keyboardsChris Dosé
2019-05-30Copy avr teensy flash logic to arm (#6016)zvecr
2019-05-29Fix TO() and DF() calling layer_state_set_[kb,user] twice (#6003)fauxpark
2019-05-18Fix bit count calculation for iterating layersRyan Caltabiano
2019-05-17Typedef'ed layer_state_t to uint32_t (#3637)Alex Ong
* Typedef'ed layer_state_t to uint32_t. This enables future work with layer_state_t to uint8_t for optimization purposes. * Removed accidental xeal60 commit * Revert to egyptian brackets, added sizeof(layer_state_t) so when layer_state_t is redefined it will automagically work. * Add additional typedefs * Add checks for setting layer state * Update tmk_core/common/action_layer.h Co-Authored-By: alex-ong <the.onga@gmail.com> * Revert commit.
2019-05-16Make delay for Capslock in Hold-Tap functions configurable (#5497)Drashna Jaelre
* Increase delay for Hold-Tap register for CAPSLOCK Because it seems that the 80ms delay wasn't too much * Screw it, make the caps delay a define and make it configurable
2019-05-10Cleanup/rgb matrix (#5811)XScorpion2
* clean up rgb matrix extern usage Moved rgb matrix boiler plate into macros Rebased onto typing heatmap pr * Fixing the reversed frame buffer access in digital rain * Fixing digital rain & typing heatmap if keyreactive effects are not enabled * Apply suggestions from code review Co-Authored-By: Drashna Jaelre <drashna@live.com> * Adding parenthesizes to DRIVER_LED_TOTAL where necessary * Updated docs * added notes about parentheses
2019-05-07rgb_led struct conversion (aka: Per led (key) type rgb matrix effects - part ↵XScorpion2
2) (#5783) * Initial conversion of the rgb_led struct * Converting last keyboard & updating effects to take advantage of the new structure * New struct should not be const * Updated docs * Changing define ___ for no led to NO_LED * Missed converting some keymap usages of the old struct layout
2019-05-06[Keyboard] Sol keyboard conversion to split common (#5773)XScorpion2
* Split common conversion * Updated serial and encoder pins * Fixing default folder until r2 * Fixing oled driver on slave split common * Fixing keymap compile errors * Fixing oled inactivity timer on slave split common * Hoisted oled driver task, init, & activity to keyboard.c * Update keyboards/sol/config.h Co-Authored-By: XScorpion2 <rcalt2vt@gmail.com> * Remove TAPPING_FORCE_HOLD
2019-05-06Re-fix Mousekey Movements (#5740)Drashna Jaelre
* Re-fix Mousekey Movements After the new movement model was instroduced, it broke diagonal momement, again. Reapplying fix from #3147 to both old and new acceleration method. * Make diagonal mouse report checks more readable Co-Authored-By: drashna <drashna@live.com>
2019-05-03Add DFU Suffix for ARM boards (#5763)Drashna Jaelre
* Add DFU Suffix for ARM boards * Blindly flash DFU SUFFIX ARGS for now * Fix commented out check * Fix DFU Suffix Argument check Thank you jack! * Update Travis CI Scripts to include dfu-util So we can get dfu-suffix as well * Manually add dfu-suffix package * Use external repo for newer version of dfu-util One that includes dfu-suffix * Update .travis.yml * Silence unnecessary output from dfu-suffix
2019-05-02Add option to enable LTO easily (#5674)Drashna Jaelre
* Add option to enable LTO easily and disable features that cause compiling errors with LTO * Add documentation about LTO option * Add to show_options
2019-04-29Updated rgb_led struct field modifier to flags (#5619)XScorpion2
Updated effects to test led flags Updated massdrop to use new flags field for led toggle
2019-04-26Fix wakeup function on ChibiOS (#5707)Drashna Jaelre
Somebody was a very, very bad boy, and did a poor job of copy-pasting
2019-04-22fix LIB_SRC and QUANTUM_LIB_SRC for ARM (#5623)Takeshi ISHII
* fix LIB_SRC and QUANTUM_LIB_SRC for ARM(chibios) * remove ARFLAGS * tmk_core/arm_atsam.mk:AR: remove 'rcs'
2019-04-19Init RGB Matrix EEPROMDrashna Jaelre
I'm not sure how to check if it's the same as RGBLIGHT's EEPROM, but if you don't init it, it **will not** work properly until it is initialized.
2019-04-19Make sure NOBITS is set on reset_keyDanny Nguyen
Patch from https://github.com/qmk/qmk_firmware/issues/3657#issuecomment-415147411 Long story short, in avr-gcc pre-8.2, reset_key was assigned to a memory area that was in a normal range, but when 8.2 came out, that memory got moved to an out of range area, causing errors like 0x800293 out of range. Apparently, this was fixed up in avr-gcc, but we haven't seen a release with the fix yet (we expected it in 8.3, but that didn't happen for some reason). What this commit does is move the reset_key back to the original memory location it was in before.
2019-04-18Improve mouse keys docs and constant speed modeMarkus Weimar
2019-04-18Fix wake from suspend LED functionalitypatrickmt
When waking from suspend, only enable the LED drivers if they were not previously set to disabled by the user. This functionality was removed by the recent updates to adapt Massdrop keyboards to QMK RGB Matrix. Affects Massdrop CTRL and ALT keyboards compiled using Massdrop Configurator mode.
2019-04-12Max out range for max compatibilityDrashna Jaelre
2019-04-12Fix ATSAM's USB HID descriptor to support higher heycodesDrashna Jaelre
Assuming I understand this correctly, this should set the max scancode to E7 (RGUI), which is the last listed code in the main list (everything else use for internal QMK/TMK stuff).
2019-04-07Remove keyboard description from Adafruit BLE device namefauxpark
2019-04-05Custom Tapping Term per key (#5009)Drashna Jaelre
* Add customizable tapping terms * Add Documentation * Fix function * Fixes * It's not a pointer * Add debugging output * Update documentation to be at least vaguely accurate * Use `get_tapping_term(tapping_key.event)` instead `e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress. However `tapping_key.event` actually gives the correct column and row information. It appears be the correct structure to use. In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h * Use variable tapping term value rather than define * Silly drashna - tapping_key.event, not event * add get_event_keycode() function * Fix typo Co-Authored-By: drashna <drashna@live.com> * Remove post_process_record_quantum since it's the wrong PR * Update quantum/quantum.c Co-Authored-By: drashna <drashna@live.com> * Better handle ifdef statement for permissive hold Since we can't be sure that tapping term is actually 500 * Update quantum.c comments based on feedback * Clean up get_tapping_term function Clean up function so that users don't need to call the event function, and instead only check the keycode * Add ability to run functionality on and off * Make ifdef's more compact
2019-04-03RGB Matrix support for Massdrop CTRL/ALT (#5328)Daniel Prilik
* port Massdrop CTRL/ALT to use RGB Matrix Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com> * Massdrop lighting support working This commit is to get the Massdrop lighting code working again through use of the compilation define USE_MASSDROP_CONFIGURATOR added to a keymap's rules.mk. Added keymaps for both CTRL and ALT named default_md and mac_md. These should be used if the Massdrop style lighting is desired. * Updating config based on testing results with patrickmt & compile errors * Updates for PR5328 For CTRL and ALT: Moved location of new RGB Matrix macros from config_led.h to config.h. Added RGB_MATRIX_LED_FLUSH_LIMIT (time between flushes) to config.h for correct LED driver update timing. Re-added missing breathing code for when Massdrop configurator mode is defined. * remove prilik keymap form PR
2019-03-27build size-check enhancement (#5485)Takeshi ISHII
* build size-check enhancement Changed to display a warning when the free size of compilation result is less than 512 bytes. * update message.mk * add SIZE_MARGIN variable, change default margin 512 to 1024 for Example. ``` $ make SIZE_MARGIN=2048 crkbd:all $ make crkbd:all ## mergin is 1024 ``` * Update message.mk change message to ‘approaching the maximum’ Co-Authored-By: mtei <2170248+mtei@users.noreply.github.com>
2019-03-26Add 3 speed mousekey movement option (#2246)Jon Arintok
This allows for constant, non-accelerated mouse movement, while retaining the original functionality. Configurable by a define.
2019-03-18correct typo in eeprom split target for dfu (#5445)Rob Rogers
2019-03-15Add avrdude split EE_HANDS flash commands (#5414)Danny
* Add EEPROM avrdude flashing commands for setting handedness * Update docs with info on flashing EEPROM handedness files with commands
2019-03-13Sleep until USB port becomes writable before running avrdude (#5393)Michael F. Lamb
* sleep until usb port becomes writable before running avrdude * only wait for a writable USB port when not on MSYS using MINGW or MSYS: sleep for one second, as before. otherwise: wait for the port to become writable. * typo * typo
2019-03-12Add new keyboard Plaid and ATMEGA328p support (#5379)Takuya Urakawa
* add plaid * Change usb vid/pid to free id from vusb Trivial fix for vusb core * update readme * update info.json default keymap * fix typo * Replace copyright
2019-03-12Next set of split_common changes (#4974)James Churchill
* Update split_common to use standard i2c drivers * Eliminate RGB_DIRTY/BACKLIT_DIRTY * Fix avr i2c_master error handling * Fix i2c_slave addressing * Remove unneeded timeout on i2c_stop() * Fix RGB I2C transfers * Remove incorrect comment
2019-02-21Velocikey: Match RGB animation speed to typing speed (#3754)Chris Lewis
* Draft commit of typing speed RGB control * More information in the readme * Support all RGB animation modes (Fixes #1) * Added support for all RGB light modes to use typing speed Except christmas lights because that is seizure-inducing at high speeds! * Introduced a value range specific to each RGB mode Because some modes are a little too much when running at full speed! * Update readme.md * Update readme.md * Re-arrange typing_speed definitions (Fixes #5) (#6) * Re-arrange variable definitions to avoid including quantum.h from rgblight.c * Fix a compilation error when trying to run make test:all * Tweaks to the typing speed decay rate * Renamed to momentum; moved implementation into dedicated files * Groundwork for toggling momentum on/off (currently always on) * Add EEPROM toggle for momentum-matching * Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic * Move momentum decay task out of rgblight_task() * Fix missing momentum.h in lufa.c * Experimental LED support (untested) * Draft commit of typing speed RGB control * More information in the readme * Support all RGB animation modes (Fixes #1) * Added support for all RGB light modes to use typing speed Except christmas lights because that is seizure-inducing at high speeds! * Introduced a value range specific to each RGB mode Because some modes are a little too much when running at full speed! * Update readme.md * Update readme.md * Re-arrange typing_speed definitions (Fixes #5) (#6) * Re-arrange variable definitions to avoid including quantum.h from rgblight.c * Fix a compilation error when trying to run make test:all * Tweaks to the typing speed decay rate * Renamed to momentum; moved implementation into dedicated files * Groundwork for toggling momentum on/off (currently always on) * Add EEPROM toggle for momentum-matching * Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic * Move momentum decay task out of rgblight_task() * Fix missing momentum.h in lufa.c * Added documentation * Renamed feature to velocikey * Reverted readme to original state * Correct the readme title * Updated feature name in the docs * Update EECONFIG name * Add compile-time toggles for velocikey * Update feature documentation * Revert "Merge branch 'led-support' into master" This reverts commit e123ff5febf61639b9a9020748e1c2e2313460ff, reversing changes made to df111a55b9d4929182e16108b1c0ead15b16df97. * Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE * Rename decay_task function to decelerate * Apply suggestions from code review Co-Authored-By: chrislewisdev <chris@chrislewisdev.com> * Re-order eeconfig definitions * Apply coding conventions * Apply #ifdef check in lufa.c * Refactored interval time checks into one functionc * Small rename * Fix unused function error for layouts not using all rgb effects * Only update EEPROM if Velocikey is enabled * Incorporate code review feedback * Small adjustment to top-end decay rate * Add Velocikey documentation to table of contents * Bring tetris:default keymap size down by disabling audio
2019-02-18Fixed grep issue in bootloader build target (#3848)Jumail Mundekkat
* Changed use of '\s' in grep to '[ \t]' for portability * Pushed DFU Keyboard.h into a shell script * Fixed execution permissions on make_dfu_header,sh
2019-02-17Change Command keycode defaults to match corresponding Bootmagic codes (#5078)Konstantin Đorđević
* Change Command keycode defaults to match corresponding Bootmagic codes * Make alternate magic key keycodes consistent * Reflect changes from previous commit in tmk_core/common/command.c * Remove unnecessary MAGIC_KEY_* definitions from keymaps compatible with these changes * Swap E and BSPACE for MAGIC_KEY_EEPROM * Add MAGIC_KEY_EEPROM_CLEAR instead of MAGIC_KEY_EEPROM_ALT * Remove BOOTMAGIC_ENABLE checks around EECONFIG stuff * Update Command descriptions
2019-02-16Haptic feedback generalized - DRV2605 and solenoids (#4939)ishtob
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards * Haptic feedback enhancements: on/off toggle working, feedback order working todo: -work on modes switching -get modes switching to save to eeprom * haptic enhancement - eeprom and modes added * Added set and get functions for haptic feedback * initial implementation of solenoids under haptic feedback * changed eeprom to 32 bits to reserve blocks for future features * start documentation of haptic feedback * change keycode per comment from reviewers * typo fixes * added eeprom for solenoid configs * added solenoid and docs * Add/fix default parameters configs, improve docs * more doc cleanup * add in solenoid buzz toggle, clean up doc * some fixes for error in compiling solenoid * fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c * fixes for avr side issues * update keymap * fix keymap compile error * fix bugs found during solenoid testing * set pin that is not powered during bootloader * added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
2019-02-14Enable custom chibios sub-platformShihpin Tseng
2019-02-14Debounce refactor / API (#3720)Drashna Jaelre
* Added xeal60 via clone of lets split * Delete removed other keymaps * Basic keymap (no FN). Compiles. * Removed NP_STAR and NP_SLSH. * Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes. * Changed order of rules in TMK. Documented feature. * Fixed missing whitespace in debounce documentation Table wasn't working due to missing newline. * Added bold in a few areas. * DO NOT USE - Removed debounce from TMK. * Remove accidental xeal60 commit * DO NOT USE - debounce successfully compiled. * DO NOT USE Revert back to original API to support split_keyboards. * Working eager_pk * Whitespace cleanup. * Restored debounce.h since there wasnt any real change. * Moved debouncing_time variable to inside #if debounce * Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used. * Removed #include "matrix.h" from debounce.h * Bug fix - was using MATRIX_ROWS instead of num_rows * Fixed compilation error with debounce_sym_g * Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE * Malloc array in debounce_eager_pk, since split keyboards only use MATRIX_ROWS/2. * Fix compile error in debounce_eager_pk * Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk
2019-02-14Add kb and user level keyboard initialization functions (#3113)Drashna Jaelre
* Add suspend functions * Disable RGB code if it's disabled * Add keyboard_init functions * Change where references so it will compile * Wrong command chained in wake up kb function * Fix non-feature file changes * Add documentation * Re-add matrix init docs * add rgblight code to example * Remove suspend code * Clean up docs * Fix docs * Fix suspend code * more doc fixes * change function to startup_* rather than keyboard_init_ * fix spelling error * fix up docs to finish removing keyboard_init * Use Pre and Post init functions * Update Documenation * Remove changes to my keymap and userspace code * Cleanup * Revert changes to extra files * Forgot a semicolon * Make sure all protocols call keyboard_setup * Cleanup functions * Unset startup_user * Remove changes from division keyboard * Readd startup_user function * Remove all to startup_user * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Update docs/custom_quantum_functions.md Co-Authored-By: drashna <drashna@live.com> * Add suggestion line * Rebase fixes * Update documentation to be more useful/accurate * Cleanup of documentation * Fix spacing inconsistency * Revert unexpected change to keymap
2019-02-13Add Satisfaction75 to QMK, Enable EEPROM on stm32f072 (#5094)Andrew Kannan
* Add stm32f072 base ck4x4 to handwired * add prints * Save these tries * Save changes again * Working hadron oled * OLEd working but ws2812b still iffy: * save another try * Encoder feature + OLED * RTC code * Implement clock setting mode * Whitespace * Encoder hooked up to working LED PWM code * Add missing files * eeprom changes * Save changes * Move i2c master * Move satisfaction75 under cannonkeys * Set proper default folder * Revert some core changes * Undo paved iris changes * Reorganize code for maintainability and prep for new features * Add starting code for clock OLED mode * Clock set mode finished * Add custom encoder modes * Actually add VIA keymap * Gate to only 072 * fix gate for only 072 * Update header guards and includes * Update i2c selection strategy * Update board.c to handle software reset to DFU
2019-02-12Remove AUTOGEN and fix Travis Compiled Push scripts (#5077)Drashna Jaelre
* Grab HEX and BIN files from autogen And push them to qmk.fm/compiled * Make autogen copy extension agnostic This way, when travis cl scrpit looks for hex files, it will actually grab bin files, and not hex files for ARM boards * Handle the AUTOGEN in :bin target to properly handle edge cases Both the TADA68 and ATSAM boards generate the hex file and then convert it to a bin file. The changes I made does not handle this well, at all. This removes the hex and replaces it with a bin, if a bin is normally generated. * Revert hex target to original copy command * Check hex and bin separately in compile push script Since I don't know how to script this, well * Simplify push to compiled folder * Further simplify compiled push script * Move AUTOGEN parsing to a more sane location to prevent tech debt Thanks to skully! * Remove AUTOGEN completely, as it's not needed This has the benefit of making everything super simple, since we can pull every hex and bin from the root of the qmk_firmware folder, and move that to th compiled folder. This also removes old and unneeded code, and removes some tech debt that has been accrued, without adding more, in theory.