From 0dee334bcee1307130fb8d5d17c37f374afb4059 Mon Sep 17 00:00:00 2001 From: Sergey Vlasov Date: Thu, 12 Nov 2020 12:00:35 +0300 Subject: handwired/onekey/blackpill_f401: Fix I2C pin config mismatch (#10322) By default the `i2c_master` driver for ChibiOS uses the B6 pin for `I2C1_SCL` and the B7 pin for `I2C1_SDA`. However, the ChibiOS board file used for the F401 Blackpill board (`ST_STM32F401C_DISCOVERY`) configures B6 as `I2C1_SCL` and B9 as `I2C1_SDA`, and if that configuration is left unchanged, enabling the `i2c_master` driver results in having two pins (B7 and B9) configured as `I2C1_SDA` at the same time, which does not work properly (experimental results show that the B9 pin still works as `I2C1_SDA` in that case, and the B7 pin does not work). Configure the B9 pin as an input with pull-up in `board_init()`, so that the B7 pin can be configured as `I2C1_SDA` by the I2C driver. --- .../onekey/blackpill_f401/blackpill_f401.c | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 keyboards/handwired/onekey/blackpill_f401/blackpill_f401.c diff --git a/keyboards/handwired/onekey/blackpill_f401/blackpill_f401.c b/keyboards/handwired/onekey/blackpill_f401/blackpill_f401.c new file mode 100644 index 0000000000..956932329c --- /dev/null +++ b/keyboards/handwired/onekey/blackpill_f401/blackpill_f401.c @@ -0,0 +1,23 @@ +/* Copyright 2020 Sergey Vlasov (sigprof) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +void board_init(void) { + // B9 is configured as I2C1_SDA in the board file; that function must be + // disabled before using B7 as I2C1_SDA. + setPinInputHigh(B9); +} -- cgit v1.2.1