From 21b6b4e6c4d6872164a13e8d31e3e0a9f146ea60 Mon Sep 17 00:00:00 2001 From: climbalima Date: Wed, 16 Nov 2016 19:49:38 -0500 Subject: should have fixed conflixed --- keyboards/lets_split/Makefile | 79 --------------------------- keyboards/lets_split/config.h | 13 +---- keyboards/lets_split/keymaps/default/keymap.c | 19 ------- keyboards/lets_split/lets_split.c | 7 +-- keyboards/lets_split/rev1/config.h | 26 --------- keyboards/lets_split/rev1/rev1.c | 6 -- keyboards/lets_split/rev1/rev1.h | 5 +- keyboards/lets_split/rev2/config.h | 18 +----- keyboards/lets_split/rev2/rev2.c | 6 -- keyboards/lets_split/rev2/rev2.h | 5 +- keyboards/maxipad/Makefile | 78 -------------------------- keyboards/maxipad/config.h | 9 +-- keyboards/maxipad/keymaps/default/keymap.c | 7 +-- 13 files changed, 10 insertions(+), 268 deletions(-) diff --git a/keyboards/lets_split/Makefile b/keyboards/lets_split/Makefile index 6ce6e43731..4e2a6f00fd 100644 --- a/keyboards/lets_split/Makefile +++ b/keyboards/lets_split/Makefile @@ -1,82 +1,3 @@ -<<<<<<< HEAD ifndef MAKEFILE_INCLUDED -======= -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= yes # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -USE_I2C ?= yes -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend - -CUSTOM_MATRIX = yes -SUBPROJECT_DEFAULT = rev2 -ifndef QUANTUM_DIR ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df include ../../Makefile endif \ No newline at end of file diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index 91b11f03fd..1b7bbcbbb9 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -61,20 +61,11 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -<<<<<<< HEAD -======= -<<<<<<< HEAD ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df + #ifdef SUBPROJECT_rev1 #include "rev1/config.h" #endif #ifdef SUBPROJECT_rev2 #include "rev2/config.h" #endif -#endif -<<<<<<< HEAD -======= - - - ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +#endif \ No newline at end of file diff --git a/keyboards/lets_split/keymaps/default/keymap.c b/keyboards/lets_split/keymaps/default/keymap.c index 41b9b8d8ff..6f1f71f5f8 100644 --- a/keyboards/lets_split/keymaps/default/keymap.c +++ b/keyboards/lets_split/keymaps/default/keymap.c @@ -29,7 +29,6 @@ enum custom_keycodes { #define XXXXXXX KC_NO const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -<<<<<<< HEAD /* Qwerty * ,-----------------------------------------------------------------------------------. @@ -83,29 +82,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ -======= -[0] = KEYMAP( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - KC_LCTL, _LOWER, KC_LGUI, KC_LALT, MO(_LOWER), KC_SPC, KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df ), [3] = KEYMAP( \ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ -<<<<<<< HEAD _______, _______, _______, _______, _______, KC_BSPC, MT(MOD_LSFT, KC_BSPC), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -======= - _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df ), [4] = KEYMAP( \ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ -<<<<<<< HEAD _______, _______, _______, _______, _______, KC_ENT, MT(MOD_LSFT, KC_ENT), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ ), @@ -126,12 +113,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ ) - - -======= - _______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df }; #ifdef AUDIO_ENABLE diff --git a/keyboards/lets_split/lets_split.c b/keyboards/lets_split/lets_split.c index 8bb33f9514..117b727a85 100644 --- a/keyboards/lets_split/lets_split.c +++ b/keyboards/lets_split/lets_split.c @@ -1,6 +1 @@ -#include "lets_split.h" - -<<<<<<< HEAD -======= - ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +#include "lets_split.h" \ No newline at end of file diff --git a/keyboards/lets_split/rev1/config.h b/keyboards/lets_split/rev1/config.h index da5b476733..825e5ec245 100644 --- a/keyboards/lets_split/rev1/config.h +++ b/keyboards/lets_split/rev1/config.h @@ -25,11 +25,8 @@ along with this program. If not, see . #define PRODUCT_ID 0x3060 #define DEVICE_VER 0x0001 #define MANUFACTURER Wootpatoot -<<<<<<< HEAD #define PRODUCT Lets Split -======= #define PRODUCT Lets Split v1 ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df #define DESCRIPTION A split keyboard for the cheap makers /* key matrix size */ @@ -44,15 +41,11 @@ along with this program. If not, see . #define CATERINA_BOOTLOADER // #define USE_I2C - -<<<<<<< HEAD // Use serial if not using I2C #ifndef USE_I2C # define USE_SERIAL #endif -======= ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df // #define EE_HANDS #define I2C_MASTER_LEFT @@ -80,21 +73,6 @@ along with this program. If not, see . keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) -/* ws2812 RGB LED */ -<<<<<<< HEAD -#define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER -#define RGBLED_NUM 8 // Number of LEDs -======= -#define ws2812_PORTREG PORTD -#define ws2812_DDRREG DDRD -#define ws2812_pin PD1 -#define RGBLED_NUM 28 // Number of LEDs ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -113,8 +91,4 @@ along with this program. If not, see . //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -<<<<<<< HEAD -#endif -======= #endif ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df diff --git a/keyboards/lets_split/rev1/rev1.c b/keyboards/lets_split/rev1/rev1.c index 41dd1e3535..c505d3a6e3 100644 --- a/keyboards/lets_split/rev1/rev1.c +++ b/keyboards/lets_split/rev1/rev1.c @@ -24,15 +24,9 @@ void matrix_init_kb(void) { }; void shutdown_user(void) { -<<<<<<< HEAD #ifdef AUDIO_ENABLE PLAY_NOTE_ARRAY(tone_goodbye, false, 0); _delay_ms(150); stop_all_notes(); #endif -======= - PLAY_NOTE_ARRAY(tone_goodbye, false, 0); - _delay_ms(150); - stop_all_notes(); ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df } diff --git a/keyboards/lets_split/rev1/rev1.h b/keyboards/lets_split/rev1/rev1.h index 998b2be7c7..4667c9fb09 100644 --- a/keyboards/lets_split/rev1/rev1.h +++ b/keyboards/lets_split/rev1/rev1.h @@ -1,15 +1,12 @@ #ifndef REV1_H #define REV1_H -<<<<<<< HEAD #include "../lets_split.h" //void promicro_bootloader_jmp(bool program); -======= #include "quantum.h" -void promicro_bootloader_jmp(bool program); ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +//void promicro_bootloader_jmp(bool program); #define KEYMAP( \ k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ diff --git a/keyboards/lets_split/rev2/config.h b/keyboards/lets_split/rev2/config.h index 19c137e56c..e9689d773d 100644 --- a/keyboards/lets_split/rev2/config.h +++ b/keyboards/lets_split/rev2/config.h @@ -41,14 +41,11 @@ along with this program. If not, see . // #define USE_I2C -<<<<<<< HEAD // Use serial if not using I2C #ifndef USE_I2C # define USE_SERIAL #endif -======= ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df // #define EE_HANDS #define I2C_MASTER_LEFT @@ -77,19 +74,11 @@ along with this program. If not, see . ) /* ws2812 RGB LED */ -<<<<<<< HEAD #define RGB_DI_PIN D3 #define RGBLIGHT_TIMER #define RGBLED_NUM 12 // Number of LEDs -======= #define ws2812_PORTREG PORTD #define ws2812_DDRREG DDRD -#define ws2812_pin PD1 -#define RGBLED_NUM 28 // Number of LEDs ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options @@ -109,8 +98,5 @@ along with this program. If not, see . //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -<<<<<<< HEAD -#endif -======= -#endif ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df + +#endif \ No newline at end of file diff --git a/keyboards/lets_split/rev2/rev2.c b/keyboards/lets_split/rev2/rev2.c index 41dd1e3535..c505d3a6e3 100644 --- a/keyboards/lets_split/rev2/rev2.c +++ b/keyboards/lets_split/rev2/rev2.c @@ -24,15 +24,9 @@ void matrix_init_kb(void) { }; void shutdown_user(void) { -<<<<<<< HEAD #ifdef AUDIO_ENABLE PLAY_NOTE_ARRAY(tone_goodbye, false, 0); _delay_ms(150); stop_all_notes(); #endif -======= - PLAY_NOTE_ARRAY(tone_goodbye, false, 0); - _delay_ms(150); - stop_all_notes(); ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df } diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h index 9e251ca57d..990976de2b 100644 --- a/keyboards/lets_split/rev2/rev2.h +++ b/keyboards/lets_split/rev2/rev2.h @@ -1,15 +1,12 @@ #ifndef REV2_H #define REV2_H -<<<<<<< HEAD #include "../lets_split.h" //void promicro_bootloader_jmp(bool program); -======= #include "quantum.h" -void promicro_bootloader_jmp(bool program); ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +//void promicro_bootloader_jmp(bool program); #define KEYMAP( \ k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ diff --git a/keyboards/maxipad/Makefile b/keyboards/maxipad/Makefile index c65665142a..57b2ef62e5 100644 --- a/keyboards/maxipad/Makefile +++ b/keyboards/maxipad/Makefile @@ -1,81 +1,3 @@ -<<<<<<< HEAD ifndef MAKEFILE_INCLUDED include ../../Makefile endif -======= - - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) -CONSOLE_ENABLE ?= yes # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE ?= no # USB Nkey Rollover -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE ?= no # MIDI controls -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE ?= no # Audio output on port C6 - -ifndef QUANTUM_DIR - include ../../Makefile -endif - - ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df diff --git a/keyboards/maxipad/config.h b/keyboards/maxipad/config.h index 4a942aae94..fbe64a5b0b 100644 --- a/keyboards/maxipad/config.h +++ b/keyboards/maxipad/config.h @@ -24,15 +24,10 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 #define DEVICE_VER 0x0001 -<<<<<<< HEAD -#define MANUFACTURER You -#define PRODUCT maxipad -#define DESCRIPTION A custom keyboard -======= #define MANUFACTURER Wootpatoot #define PRODUCT maxipad -#define DESCRIPTION g8ming keeb ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df +#define DESCRIPTION A custom keyboard + /* key matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/maxipad/keymaps/default/keymap.c b/keyboards/maxipad/keymaps/default/keymap.c index 5e3a594ccd..43ace32419 100644 --- a/keyboards/maxipad/keymaps/default/keymap.c +++ b/keyboards/maxipad/keymaps/default/keymap.c @@ -10,15 +10,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = KEYMAP( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, \ -<<<<<<< HEAD KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \ -======= KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ ->>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ ), }; -- cgit v1.2.1