From 22e499efdb12d277b9847dea8809ba1b717e071f Mon Sep 17 00:00:00 2001 From: Danny Date: Fri, 15 Mar 2019 17:28:38 -0400 Subject: [Keyboard] Add handwired split tester (#5413) * Add handwired split tester * Update keyboards/handwired/splittest/readme.md Co-Authored-By: nooges * Update keyboards/handwired/splittest/readme.md Co-Authored-By: nooges --- keyboards/handwired/splittest/config.h | 75 ++++++++++++++++++++++ .../handwired/splittest/keymaps/default/config.h | 23 +++++++ .../handwired/splittest/keymaps/default/keymap.c | 5 ++ keyboards/handwired/splittest/readme.md | 26 ++++++++ keyboards/handwired/splittest/rules.mk | 65 +++++++++++++++++++ keyboards/handwired/splittest/splittest.c | 1 + keyboards/handwired/splittest/splittest.h | 5 ++ 7 files changed, 200 insertions(+) create mode 100644 keyboards/handwired/splittest/config.h create mode 100644 keyboards/handwired/splittest/keymaps/default/config.h create mode 100644 keyboards/handwired/splittest/keymaps/default/keymap.c create mode 100644 keyboards/handwired/splittest/readme.md create mode 100644 keyboards/handwired/splittest/rules.mk create mode 100644 keyboards/handwired/splittest/splittest.c create mode 100644 keyboards/handwired/splittest/splittest.h diff --git a/keyboards/handwired/splittest/config.h b/keyboards/handwired/splittest/config.h new file mode 100644 index 0000000000..9e4fb38ca0 --- /dev/null +++ b/keyboards/handwired/splittest/config.h @@ -0,0 +1,75 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCB10 +#define PRODUCT_ID 0x1111 +#define DEVICE_VER 0x0100 +#define MANUFACTURER Keebio +#define PRODUCT Split Tester +#define DESCRIPTION Split keyboard testing unit + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 2 +#define MATRIX_COLS 1 + +// wiring of each half +#define MATRIX_ROW_PINS { B3 } +#define MATRIX_COL_PINS { B6 } +#define SPLIT_HAND_PIN F6 +#define SOFT_SERIAL_PIN D1 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D3 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLED_SPLIT { 6, 6 } + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/handwired/splittest/keymaps/default/config.h b/keyboards/handwired/splittest/keymaps/default/config.h new file mode 100644 index 0000000000..ecebd36589 --- /dev/null +++ b/keyboards/handwired/splittest/keymaps/default/config.h @@ -0,0 +1,23 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define USE_I2C diff --git a/keyboards/handwired/splittest/keymaps/default/keymap.c b/keyboards/handwired/splittest/keymaps/default/keymap.c new file mode 100644 index 0000000000..1c15f6f1df --- /dev/null +++ b/keyboards/handwired/splittest/keymaps/default/keymap.c @@ -0,0 +1,5 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT(RGB_MOD, RESET) +}; diff --git a/keyboards/handwired/splittest/readme.md b/keyboards/handwired/splittest/readme.md new file mode 100644 index 0000000000..3dbff32ed4 --- /dev/null +++ b/keyboards/handwired/splittest/readme.md @@ -0,0 +1,26 @@ +Split Tester +============ + +A two-switch tester built using two Pro Micros, mainly intended to test RGB on split keyboards. Seen here: https://www.instagram.com/p/BvCPNzynwrV/ + +Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges) +Hardware Supported: Pro Micro + +Make example for this keyboard (after setting up your build environment): + + make handwired/splittest:default + +Example of flashing this keyboard: + + make handwired/splittest:default:avrdude + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +Wiring +------ +- Add switches to both Pro Micros across B3 and B6 pins +- Add pull-up resistor to left side between VCC and F6 +- Add pull-down resistors to right side between GND and F6 +- Connect the following pins on both sides together: D0, D1, GND, VCC +- Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC +- Wire Di of RGB strip for each half to D2 diff --git a/keyboards/handwired/splittest/rules.mk b/keyboards/handwired/splittest/rules.mk new file mode 100644 index 0000000000..9512c0f648 --- /dev/null +++ b/keyboards/handwired/splittest/rules.mk @@ -0,0 +1,65 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +SPLIT_KEYBOARD = yes diff --git a/keyboards/handwired/splittest/splittest.c b/keyboards/handwired/splittest/splittest.c new file mode 100644 index 0000000000..3c919a565d --- /dev/null +++ b/keyboards/handwired/splittest/splittest.c @@ -0,0 +1 @@ +#include "splittest.h" diff --git a/keyboards/handwired/splittest/splittest.h b/keyboards/handwired/splittest/splittest.h new file mode 100644 index 0000000000..17b7081a02 --- /dev/null +++ b/keyboards/handwired/splittest/splittest.h @@ -0,0 +1,5 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT(L1, R1) {{L1}, {R1}} -- cgit v1.2.1