From 995c3141a674a0311786cc713ea96d39330a9b48 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sat, 10 Jun 2017 14:58:55 -0400 Subject: convert docs to lowercase and underscores --- docs/_summary.md | 28 +++ docs/pcb_guide.md | 151 +++++++++++++ docs/porting_your_keyboard_to_qmk.md | 59 +++++ ...keyboard_to_qmk_(arm_and_other_chibios_cpus).md | 70 ++++++ docs/power.txt | 62 ++++++ docs/previously_asked_questions.asciidoc | 14 ++ docs/qmk_overview.md | 75 +++++++ docs/report_descriptor.md | 1 + docs/space_cadet_shift.md | 24 ++ docs/tap_dance.md | 144 ++++++++++++ docs/test_for_asciidoc.asciidoc | 17 ++ docs/tmk_based_projects.md | 34 +++ docs/tmk_own_projects.md | 69 ++++++ docs/tmk_readme.md | 243 +++++++++++++++++++++ docs/unicode_and_additional_language_support.md | 54 +++++ docs/unit_testing.md | 68 ++++++ docs/usb_hid.md | 11 + docs/usb_nkro.txt | 160 ++++++++++++++ docs/vagrant_guide.md | 27 +++ 19 files changed, 1311 insertions(+) create mode 100644 docs/_summary.md create mode 100644 docs/pcb_guide.md create mode 100644 docs/porting_your_keyboard_to_qmk.md create mode 100644 docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md create mode 100644 docs/power.txt create mode 100644 docs/previously_asked_questions.asciidoc create mode 100644 docs/qmk_overview.md create mode 100644 docs/report_descriptor.md create mode 100644 docs/space_cadet_shift.md create mode 100644 docs/tap_dance.md create mode 100644 docs/test_for_asciidoc.asciidoc create mode 100644 docs/tmk_based_projects.md create mode 100644 docs/tmk_own_projects.md create mode 100644 docs/tmk_readme.md create mode 100644 docs/unicode_and_additional_language_support.md create mode 100644 docs/unit_testing.md create mode 100644 docs/usb_hid.md create mode 100644 docs/usb_nkro.txt create mode 100644 docs/vagrant_guide.md diff --git a/docs/_summary.md b/docs/_summary.md new file mode 100644 index 0000000000..420003996f --- /dev/null +++ b/docs/_summary.md @@ -0,0 +1,28 @@ + +### Getting started +* [Introduction](home.md) +* [QMK Overview](qmk_overview.md) +* [Build Environment Setup](build_environment_setup.md) + +### Making a keymap +* [Keymap overview](keymap.md) +* [Custom Quantum Functions](custom_quantum_functions.md) +* [Keycodes](keycodes.md) +* [Layer switching](key_functions.md) +* [Leader Key](leader_key.md) +* [Macros](macros.md) +* [Dynamic Macros](dynamic_macros.md) +* [Space Cadet](space_cadet_shift.md) +* [Tap Dance](tap_dance.md) +* [Mouse keys](mouse_keys.md) +* [FAQ: Creating a Keymap](faq_keymap.md) +* [FAQ: Compiling QMK](faq_build.md) + +### For hardware makers and modders +* [Modding your keyboard](modding_your_keyboard.md) +* [Porting your keyboard to QMK](porting_your_keyboard_to_qmk.md) +* [Adding features to QMK](adding_features_to_qmk.md) + +### Other topics +* [General FAQ](faq.md) +* [Differences from TMK](differences_from_tmk.md) diff --git a/docs/pcb_guide.md b/docs/pcb_guide.md new file mode 100644 index 0000000000..e07a114888 --- /dev/null +++ b/docs/pcb_guide.md @@ -0,0 +1,151 @@ +# Planck Firmware Guide + +## Setting up the environment + +### Windows +1. Install [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Disable smatch, but **be sure to leave the option to add the tools to the PATH checked**. +2. Install [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). During installation, uncheck the option to install a graphical user interface. **DO NOT change the default installation folder.** The scripts depend on the default location. +3. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/qmk/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer. +4. Right-click on the 1-setup-path-win batch script, select "Run as administrator", and accept the User Account Control prompt. Press the spacebar to dismiss the success message in the command prompt that pops up. +5. Right-click on the 2-setup-environment-win batch script, select "Run as administrator", and accept the User Account Control prompt. This part may take a couple of minutes, and you'll need to approve a driver installation, but once it finishes, your environment is complete! + + +### Mac + +If you're using homebrew, you can use the following commands: + + brew tap osx-cross/avr + brew install avr-libc + brew install dfu-programmer + +Otherwise, these instructions will work: + +1. Install Xcode from the App Store. +2. Install the Command Line Tools from `Xcode->Preferences->Downloads`. +3. Install [DFU-Programmer][dfu-prog]. + +### Linux +1. Install AVR GCC with your favorite package manager. +2. Install [DFU-Programmer][dfu-prog]. + +Note that, since it will be directly accessing USB hardware, the +`dfu-programmer` program needs to be run as root. + +## Verify Your Installation +1. Clone the following repository: https://github.com/qmk/qmk_firmware +2. Open a Terminal and `cd` into `qmk_firmware/keyboards/planck` +3. Run `make`. This should output a lot of information about the build process. + +## Using the built-in functions + +Here is a list of some of the functions available from the command line: + +* `make clean`: clean the environment - may be required in-between builds +* `make`: compile the code +* `make KEYMAP=`: compile with the extended keymap file `extended_keymaps/extended_keymap_.c` +* `make dfu`: build and flash the layout to the PCB +* `make dfu-force`: build and force-flash the layout to the PCB (may be require for first flash) + +Generally, the instructions to flash the PCB are as follows: + +1. Make changes to the appropriate keymap file +2. Save the file +3. `make clean` +4. Press the reset button on the PCB/press the key with the `RESET` keycode +5. `make dfu` - use the necessary `KEYMAP=` and/or `COMMON=true` arguments here. + +## Troubleshooting +If you see something like this + + 0 [main] sh 13384 sync_with_child: child 9716(0x178) died before initialization with status code 0xC0000142 + 440 [main] sh 13384 sync_with_child: *** child state waiting for longjmp + /usr/bin/sh: fork: Resource temporarily unavailable + +after running 'make' on Windows than you are encountering a very popular issue with WinAVR on Windows 8.1 and 10. +You can easily fix this problem by replacing msys-1.0.dll in WinAVR/utils/bin with [this one](http://www.madwizard.org/download/electronics/msys-1.0-vista64.zip). +Restart your system and everything should work fine! + + +If you see this + + dfu-programmer atmega32u4 erase + process_begin: CreateProcess(NULL, dfu-programmer atmega32u4 erase, ...) failed. + make (e=2): The system cannot find the file specified. + make: *** [dfu] Error 2 + +when trying to 'make dfu' on Windows you need to copy the dfu-programmer.exe to qmk_firmware/keyboards/planck. + + +## Quantum MK Firmware + +### Keymap + +Unlike the other keymaps, prefixing the keycodes with `KC_` is required. A full list of the keycodes is available [here](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/doc/keycode.txt). For the keycodes available only in the extended keymap, see this [header file](https://github.com/qmk/qmk_firmware/blob/master/quantum/keymap_common.h). + +You can use modifiers with keycodes like this: + + LCTL(KC_C) + +Which will generate Ctrl+c. These are daisy-chainable, meaning you can do things like: + + LCTL(LALT(KC_C)) + +That will generate Ctrl+Alt+c. The entire list of these functions is here: + +* `LCTL()`: Left control +* `LSFT()` / `S()`: Left shift +* `LALT()`: Left alt/opt +* `LGUI()`: Left win/cmd +* `RCTL()`: Right control +* `RSFT()`: Right shift +* `RALT()`: Right alt/opt +* `RGUI()`: Right win/cmd + +`S(KC_1)`-like entries are useful in writing keymaps for the Planck. + +### Other keycodes + +A number of other keycodes have been added that you may find useful: + +* `CM_`: the Colemak equivalent of a key (in place of `KC_`), when using Colemak in software (`CM_O` generates `KC_SCLN`) +* `RESET`: jump to bootloader for flashing (same as press the reset button) +* `BL_STEP`: step through the backlight brightnesses +* `BL_<0-15>`: set backlight brightness to 0-15 +* `BL_DEC`: lower the backlight brightness +* `BL_INC`: raise the backlight brightness +* `BL_TOGG`: toggle the backlight on/off + +### Function layers + +The extended keymap extends the number of function layers from 32 to the near-infinite value of 256. Rather than using `FN` notation (still available, but limited to `FN0`-`FN31`), you can use the `FUNC()` notation. `F()` is a shortcut for this. + +The function actions are unchanged, and you can see the full list of them [here](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action_code.h). They are explained in detail [here](keymap.md#2-action). + +### Macros + +Macros have been setup in the `keymaps/keymap_default.c` file so that you can use `M()` to access a macro in the `action_get_macro` section on your keymap. The switch/case structure you see here is required, and is setup for `M(0)` - you'll need to copy and paste the code to look like this (e.g. to support `M(3)`): + + switch(id) { + case 0: + return MACRODOWN(TYPE(KC_A), END); + break; + case 1: + return MACRODOWN(TYPE(KC_B), END); + break; + case 2: + return MACRODOWN(TYPE(KC_C), END); + break; + case 3: + return MACRODOWN(TYPE(KC_D), END); + break; + } + return MACRO_NONE; + +`MACRODOWN()` is a shortcut for `(record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)` which tells the macro to execute when the key is pressed. Without this, the macro will be executed on both the down and up stroke. + +[cygwin]: https://www.cygwin.com/ +[mingw]: http://www.mingw.org/ +[mhv]: https://infernoembedded.com/products/avr-tools +[winavr]: http://winavr.sourceforge.net/ +[crosspack]: http://www.obdev.at/products/crosspack/index.html +[dfu-prog]: http://dfu-programmer.sourceforge.net/ diff --git a/docs/porting_your_keyboard_to_qmk.md b/docs/porting_your_keyboard_to_qmk.md new file mode 100644 index 0000000000..6f291a432d --- /dev/null +++ b/docs/porting_your_keyboard_to_qmk.md @@ -0,0 +1,59 @@ +If your keyboard is running an Atmega chip (atmega32u4 and others), it's pretty easy to get things setup for compiling your own firmware to flash onto your board. There is a `/util/new_project.sh ` script to help get you started - you can simply pass your keyboard's name into the script, and all of the necessary files will be created. The components of each are described below. + +## `/keyboards//config.h` + +The `USB Device descriptor parameter` block contains parameters are used to uniquely identify your keyboard, but they don't really matter to the machine. + +Your `MATRIX_ROWS` and `MATRIX_COLS` are the numbers of rows and cols in your keyboard matrix - this may be different than the number of actual rows and columns on your keyboard. There are some tricks you can pull to increase the number of keys in a given matrix, but most keyboards are pretty straight-forward. + +The `MATRIX_ROW_PINS` and `MATRIX_COL_PINS` are the pins your MCU uses on each row/column. Your schematic (if you have one) will have this information on it, and the values will vary depending on your setup. This is one of the most important things to double-check in getting your keyboard setup correctly. + +For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the diodes in the `COL2ROW` position, but it's possible that they are in the other - people coming from EasyAVR often use `ROW2COL`. Nothing will function if this is incorrect. + +`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported. + +`BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap. + +`BACKLIGHT_LEVELS` is how many levels exist for your backlight - max is 15, and they are computed automatically from this number. + +## `/keyboards//Makefile` + +The values at the top likely won't need to be changed, since most boards use the `atmega32u4` chip. The `BOOTLOADER_SIZE` will need to be adjusted based on your MCU type. It's defaulted to the Teensy, since that's the most common controller. Below is quoted from the `Makefile`. + +``` +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 +``` + +At the bottom of the file, you'll find lots of features to turn on and off - all of these options should be set with `?=` to allow for the keymap overrides. `?=` only assigns if the variable was previously undefined. For the full documenation of these features, see the [Makefile options](#makefile-options). + +## `/keyboards//readme.md` + +This is where you'll describe your keyboard - please write as much as you can about it! Talking about default functionality/features is useful here. Feel free to link to external pages/sites if necessary. Images can be included here as well. This file will be rendered into a webpage at qmk.fm/keyboards//. + +## `/keyboards//.c` + +This is where all of the custom logic for your keyboard goes - you may not need to put anything in this file, since a lot of things are configured automatically. All of the `*_kb()` functions are defined here. If you modify them, remember to keep the calls to `*_user()`, or things in the keymaps might not work. You can read more about the functions [here](#custom-quantum-functions-for-keyboards-and-keymaps) + +## `/keyboards//.h` + +Here is where you can (optionally) define your `KEYMAP` function to remap your matrix into a more readable format. With ortholinear boards, this isn't always necessary, but it can help to accomodate the dead spots on your matrix, where there are keys that take up more than one space (2u, staggering, 6.25u, etc). The example shows the difference between the physical keys, and the matrix design: + +``` +#define KEYMAP( \ + k00, k01, k02, \ + k10, k11 \ +) \ +{ \ + { k00, k01, k02 }, \ + { k10, KC_NO, k11 }, \ +} +``` + +Each of the `kxx` variables needs to be unique, and usually follows the format `k`. You can place `KC_NO` where your dead keys are in your matrix. + diff --git a/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md b/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md new file mode 100644 index 0000000000..436c73cb76 --- /dev/null +++ b/docs/porting_your_keyboard_to_qmk_(arm_and_other_chibios_cpus).md @@ -0,0 +1,70 @@ +Setting up your ARM based PCB is a little more involved than an Atmel MCU, but is easy enough. Start by using `util/new_project.sh ` to create a new project: + +``` +$ util/new_project.sh simontester +###################################################### +# /keyboards/simontester project created. To start +# working on things, cd into keyboards/simontester +###################################################### +``` + + + +# END OF NEW ARM DOC, OLD ATMEL DOC FOLLOWS + +## `/keyboards//config.h` + +The `USB Device descriptor parameter` block contains parameters are used to uniquely identify your keyboard, but they don't really matter to the machine. + +Your `MATRIX_ROWS` and `MATRIX_COLS` are the numbers of rows and cols in your keyboard matrix - this may be different than the number of actual rows and columns on your keyboard. There are some tricks you can pull to increase the number of keys in a given matrix, but most keyboards are pretty straight-forward. + +The `MATRIX_ROW_PINS` and `MATRIX_COL_PINS` are the pins your MCU uses on each row/column. Your schematic (if you have one) will have this information on it, and the values will vary depending on your setup. This is one of the most important things to double-check in getting your keyboard setup correctly. + +For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the diodes in the `COL2ROW` position, but it's possible that they are in the other - people coming from EasyAVR often use `ROW2COL`. Nothing will function if this is incorrect. + +`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported. + +`BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap. + +`BACKLIGHT_LEVELS` is how many levels exist for your backlight - max is 15, and they are computed automatically from this number. + +## `/keyboards//Makefile` + +The values at the top likely won't need to be changed, since most boards use the `atmega32u4` chip. The `BOOTLOADER_SIZE` will need to be adjusted based on your MCU type. It's defaulted to the Teensy, since that's the most common controller. Below is quoted from the `Makefile`. + +``` +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 +``` + +At the bottom of the file, you'll find lots of features to turn on and off - all of these options should be set with `?=` to allow for the keymap overrides. `?=` only assigns if the variable was previously undefined. For the full documenation of these features, see the [Makefile options](#makefile-options). + +## `/keyboards//readme.md` + +This is where you'll describe your keyboard - please write as much as you can about it! Talking about default functionality/features is useful here. Feel free to link to external pages/sites if necessary. Images can be included here as well. This file will be rendered into a webpage at qmk.fm/keyboards//. + +## `/keyboards//.c` + +This is where all of the custom logic for your keyboard goes - you may not need to put anything in this file, since a lot of things are configured automatically. All of the `*_kb()` functions are defined here. If you modify them, remember to keep the calls to `*_user()`, or things in the keymaps might not work. You can read more about the functions [here](#custom-quantum-functions-for-keyboards-and-keymaps) + +## `/keyboards//.h` + +Here is where you can (optionally) define your `KEYMAP` function to remap your matrix into a more readable format. With ortholinear boards, this isn't always necessary, but it can help to accomodate the dead spots on your matrix, where there are keys that take up more than one space (2u, staggering, 6.25u, etc). The example shows the difference between the physical keys, and the matrix design: + +``` +#define KEYMAP( \ + k00, k01, k02, \ + k10, k11 \ +) \ +{ \ + { k00, k01, k02 }, \ + { k10, KC_NO, k11 }, \ +} +``` + +Each of the `kxx` variables needs to be unique, and usually follows the format `k`. You can place `KC_NO` where your dead keys are in your matrix. diff --git a/docs/power.txt b/docs/power.txt new file mode 100644 index 0000000000..0abbbe48e8 --- /dev/null +++ b/docs/power.txt @@ -0,0 +1,62 @@ +Time to Sleep +============= +USB suspend no activity on USB line for 3ms +No Interaction no user interaction + matrix has no change + matrix has no switch on + + +AVR Power Management +==================== + +V-USB suspend + USB suspend + http://vusb.wikidot.com/examples + +MCUSR MCU Status Register + WDRF Watchdog Reset Flag + BORF + EXTRF + PORF Power-on Reset Flag + +SMCR Sleep Mode Control Register + SE Sleep Enable + SM2:0 + #define set_sleep_mode(mode) \ + #define SLEEP_MODE_IDLE (0) + #define SLEEP_MODE_ADC _BV(SM0) + #define SLEEP_MODE_PWR_DOWN _BV(SM1) + #define SLEEP_MODE_PWR_SAVE (_BV(SM0) | _BV(SM1)) + #define SLEEP_MODE_STANDBY (_BV(SM1) | _BV(SM2)) + #define SLEEP_MODE_EXT_STANDBY (_BV(SM0) | _BV(SM1) | _BV(SM2)) + + +ACSR Analog Comparator Control and Status Register + To disable Analog Comparator + ACSR = 0x80; + or + ACSR &= ~_BV(ACIE); + ACSR |= _BV(ACD); + + ACD: Analog Comparator Disable + When this bit is written logic one, the power to the Analog Comparator is + switched off. This bit can be set at any time to turn off the Analog + Comparator. This will reduce power consumption in Active and Idle mode. + When changing the ACD bit, the Analog Comparator Interrupt must be disabled + by clearing the ACIE bit in ACSR. Otherwise an interrupt can occur when + the bit is changed. + +DIDR1 Digital Input Disable Register 1 + AIN1D + AIN0D + When this bit is written logic one, the digital input buffer on the AIN1/0 pin is disabled. The corresponding PIN Register bit will always read as zero when this bit is set. When an analog signal is applied to the AIN1/0 pin and the digital input from this pin is not needed, this bit should be written logic one to reduce power consumption in the digital input buffer. + + +PRR Power Reduction Register + PRTWI + PRTIM2 + PRTIM0 + PRTIM1 + PRSPI + PRUSART0 + PRADC diff --git a/docs/previously_asked_questions.asciidoc b/docs/previously_asked_questions.asciidoc new file mode 100644 index 0000000000..36af1f2035 --- /dev/null +++ b/docs/previously_asked_questions.asciidoc @@ -0,0 +1,14 @@ += Previously Asked Questions +:toc: +:toc-placement: preamble + +toc::[] + += Question thread +http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177-270.html + += Questions +== Columns beyond 16(uint16_t) cannot be read +* https://github.com/tmk/tmk_keyboard/wiki/FAQ#cant-read-comlumn-of-matrix-beyond-16 +* http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177-270.html#p247051 +* http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 diff --git a/docs/qmk_overview.md b/docs/qmk_overview.md new file mode 100644 index 0000000000..6fdb68c49f --- /dev/null +++ b/docs/qmk_overview.md @@ -0,0 +1,75 @@ +# QMK Overview + +This page attempts to explain the basic information you need to know to work with the QMK project. It assumes that you are familiar with navigating a UNIX shell, but does not assume you are familiar with C or with compiling using make. + +# Basic QMK structure + +QMK is a fork of @tmk's [tmk_keyboard](https://github.com/tmk/tmk_keyboard) project. The original TMK code, with modifications, can be found in the `tmk` folder. The QMK additions to the project may be found in the `quantum` folder. Keyboard projects may be found in the `handwired` and `keyboard` folders. + +## Keyboard project structure + +Within the `handwired` and `keyboard` folders is a directory for each keyboard project, for example `qmk_firmware/keyboards/clueboard`. Within you'll find the following structure: + +* `keymaps/`: Different keymaps that can be built +* `rules.mk`: The file that sets the default "make" options. Do not edit this file directly, instead use a keymap specific `Makefile`. +* `config.h`: The file that sets the default compile time options. Do not edit this file directly, instead use a keymap specific `config.h`. + +### Keymap structure + +In every keymap folder, the following files may be found. Only `keymap.c` is required, if the rest of the files are not found the default options will be chosen. + +* `config.h`: the options to configure your keymap +* `keymap.c`: all of your keymap code, required +* `Makefile`: the features of QMK that are enabled, required to run `make` in your keymap folder +* `readme.md`: a description of your keymap, how others might use it, and explanations of features +* Other files: Some people choose to include an image depicting the layout, and other files that help people to use or understand a particular keymap. + +# The `make` command + +The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). It it recommended that you always run make from within the `root` folder. + +**NOTE:** To abort a make command press `Ctrl-c` + +For more details on the QMK build process see [Make Instructions](make_instructions.md). + +### Simple instructions for building and uploading a keyboard + +**Most keyboards have more specific instructions in the keyboard specific readme.md file, so please check that first** + +1. Enter the `root` folder +2. Run `make ---` + +In the above commands, replace: + +* `` with the name of your keyboard +* `` with the name of your keymap +* `` with the name of the subproject (revision or sub-model of your keyboard). For example, for Ergodox it can be `ez` or `infinity`, and for Planck `rev3` or `rev4`. + * If the keyboard doesn't have a subproject, or if you are happy with the default (defined in `rules.mk` file of the `keyboard` folder), you can leave it out. But remember to also remove the dash (`-`) from the command. +* `` The programmer to use. Most keyboards use `dfu`, but some use `teensy`. Infinity keyboards use `dfu-util`. Check the readme file in the keyboard folder to find out which programmer to use. + * If you don't add `-/`) +* keymap (`/keyboards//keymaps//`) + +The keyboard `config.h` is included only if the keymap one doesn't exist. The format to use for your custom one [is here](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap_config_h_example.h). If you want to override a setting from the parent `config.h` file, you need to do this: + +```c +#undef MY_SETTING +#define MY_SETTING 4 +``` + +For a value of `4` for this imaginary setting. So we `undef` it first, then `define` it. + +You can then override any settings, rather than having to copy and paste the whole thing. \ No newline at end of file diff --git a/docs/report_descriptor.md b/docs/report_descriptor.md new file mode 100644 index 0000000000..fd5e96c67d --- /dev/null +++ b/docs/report_descriptor.md @@ -0,0 +1 @@ +# Get Report Descriptor with lsusb \ No newline at end of file diff --git a/docs/space_cadet_shift.md b/docs/space_cadet_shift.md new file mode 100644 index 0000000000..a1ec256def --- /dev/null +++ b/docs/space_cadet_shift.md @@ -0,0 +1,24 @@ +## Space Cadet Shift: The future, built in + +Steve Losh [described](http://stevelosh.com/blog/2012/10/a-modern-space-cadet/) the Space Cadet Shift quite well. Essentially, you hit the left Shift on its own, and you get an opening parenthesis; hit the right Shift on its own, and you get the closing one. When hit with other keys, the Shift key keeps working as it always does. Yes, it's as cool as it sounds. + +To use it, use `KC_LSPO` (Left Shift, Parens Open) for your left Shift on your keymap, and `KC_RSPC` (Right Shift, Parens Close) for your right Shift. + +It's defaulted to work on US keyboards, but if your layout uses different keys for parenthesis, you can define those in your `config.h` like this: + + #define LSPO_KEY KC_9 + #define RSPC_KEY KC_0 + +You can also choose between different rollover behaviors of the shift keys by defining: + + #define DISABLE_SPACE_CADET_ROLLOVER + +in your `config.h`. Disabling rollover allows you to use the opposite shift key to cancel the space cadet state in the event of an erroneous press instead of emitting a pair of parentheses when the keys are released. + +The only other thing you're going to want to do is create a `Makefile` in your keymap directory and set the following: + +``` +COMMAND_ENABLE = no # Commands for debug and configuration +``` + +This is just to keep the keyboard from going into command mode when you hold both Shift keys at the same time. diff --git a/docs/tap_dance.md b/docs/tap_dance.md new file mode 100644 index 0000000000..25827a6485 --- /dev/null +++ b/docs/tap_dance.md @@ -0,0 +1,144 @@ +# Tap Dance: A single key can do 3, 5, or 100 different things + +Hit the semicolon key once, send a semicolon. Hit it twice, rapidly -- send a colon. Hit it three times, and your keyboard's LEDs do a wild dance. That's just one example of what Tap Dance can do. It's one of the nicest community-contributed features in the firmware, conceived and created by [algernon](https://github.com/algernon) in [#451](https://github.com/qmk/qmk_firmware/pull/451). Here's how algernon describes the feature: + +With this feature one can specify keys that behave differently, based on the amount of times they have been tapped, and when interrupted, they get handled before the interrupter. + +To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets explore a certain setup! We want one key to send `Space` on single tap, but `Enter` on double-tap. + +With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and has the problem that when the sequence is interrupted, the interrupting key will be send first. Thus, `SPC a` will result in `a SPC` being sent, if they are typed within `TAPPING_TERM`. With the tap dance feature, that'll come out as `SPC a`, correctly. + +The implementation hooks into two parts of the system, to achieve this: into `process_record_quantum()`, and the matrix scan. We need the latter to be able to time out a tap sequence even when a key is not being pressed, so `SPC` alone will time out and register after `TAPPING_TERM` time. + +But lets start with how to use it, first! + +First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because the feature is disabled by default. This adds a little less than 1k to the firmware size. Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that - similar to `F()`, takes a number, which will later be used as an index into the `tap_dance_actions` array. + +This array specifies what actions shall be taken when a tap-dance key is in action. Currently, there are three possible options: + +* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held. +* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action. +* `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function on when the dance action finishes (like the previous option), and the last function when the tap dance action resets. + +The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. + +And that's the bulk of it! + +And now, on to the explanation of how it works! + +The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and the timer. + +This means that you have `TAPPING_TERM` time to tap the key again, you do not have to input all the taps within that timeframe. This allows for longer tap counts, with minimal impact on responsiveness. + +Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of tap-dance keys. + +For the sake of flexibility, tap-dance actions can be either a pair of keycodes, or a user function. The latter allows one to handle higher tap counts, or do extra things, like blink the LEDs, fiddle with the backlighting, and so on. This is accomplished by using an union, and some clever macros. + +### Examples + +Here's a simple example for a single definition: + +1. In your `makefile`, add `TAP_DANCE_ENABLE = yes` +2. In your `config.h` (which you can copy from `qmk_firmware/keyboards/planck/config.h` to your keymap directory), add `#define TAPPING_TERM 200` +3. In your `keymap.c` file, define the variables and definitions, then add to your keymap: + +```c +//Tap Dance Declarations +enum { + TD_ESC_CAPS = 0 +}; + +//Tap Dance Definitions +qk_tap_dance_action_t tap_dance_actions[] = { + //Tap once for Esc, twice for Caps Lock + [TD_ESC_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_CAPS) +// Other declarations would go here, separated by commas, if you have them +}; + +//In Layer declaration, add tap dance item in place of a key code +TD(TD_ESC_CAPS) +``` + +Here's a more complex example involving custom actions: + +```c +enum { + CT_SE = 0, + CT_CLN, + CT_EGG, + CT_FLSH, +}; + +/* Have the above three on the keymap, TD(CT_SE), etc... */ + +void dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + register_code (KC_RSFT); + register_code (KC_SCLN); + } else { + register_code (KC_SCLN); + } +} + +void dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + unregister_code (KC_RSFT); + unregister_code (KC_SCLN); + } else { + unregister_code (KC_SCLN); + } +} + +void dance_egg (qk_tap_dance_state_t *state, void *user_data) { + if (state->count >= 100) { + SEND_STRING ("Safety dance!"); + reset_tap_dance (state); + } +} + +// on each tap, light up one led, from right to left +// on the forth tap, turn them off from right to left +void dance_flsh_each(qk_tap_dance_state_t *state, void *user_data) { + switch (state->count) { + case 1: + ergodox_right_led_3_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_1_on(); + break; + case 4: + ergodox_right_led_3_off(); + _delay_ms(50); + ergodox_right_led_2_off(); + _delay_ms(50); + ergodox_right_led_1_off(); + } +} + +// on the fourth tap, set the keyboard on flash state +void dance_flsh_finished(qk_tap_dance_state_t *state, void *user_data) { + if (state->count >= 4) { + reset_keyboard(); + reset_tap_dance(state); + } +} + +// if the flash state didnt happen, then turn off leds, left to right +void dance_flsh_reset(qk_tap_dance_state_t *state, void *user_data) { + ergodox_right_led_1_off(); + _delay_ms(50); + ergodox_right_led_2_off(); + _delay_ms(50); + ergodox_right_led_3_off(); +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT) + ,[CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_cln_finished, dance_cln_reset) + ,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg) + ,[CT_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED (dance_flsh_each, dance_flsh_finished, dance_flsh_reset) +}; +``` diff --git a/docs/test_for_asciidoc.asciidoc b/docs/test_for_asciidoc.asciidoc new file mode 100644 index 0000000000..ce57d2781b --- /dev/null +++ b/docs/test_for_asciidoc.asciidoc @@ -0,0 +1,17 @@ + + + +.Makefile +[source,Makefile] +---- +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +---- \ No newline at end of file diff --git a/docs/tmk_based_projects.md b/docs/tmk_based_projects.md new file mode 100644 index 0000000000..0597b04c38 --- /dev/null +++ b/docs/tmk_based_projects.md @@ -0,0 +1,34 @@ +## TMK based projects +Add your project here! +See https://github.com/tmk/tmk_keyboard/issues/173 + +### keyboards +**S60-X**: [DIY 60% keyboard](https://www.massdrop.com/buy/sentraq-60-diy-keyboard-kit?mode=guest_open) designed by [VinnyCordeiro](https://github.com/VinnyCordeiro) for Sentraq: +- https://github.com/VinnyCordeiro/tmk_keyboard + +**Octagon V1**: Korean custom keyboard designed by Duck. +- https://github.com/xauser/tmk_keyboard/tree/xauser + +**Compact L3**: Custom keyboard designed by LifeZone and LeeKu. +- https://github.com/xauser/tmk_keyboard/tree/xauser + +**KMAC, 1,2 and Happy**: Custom keyboard designed by kbdmania. +- https://github.com/ageaenes/tmk_keyboard + +**P60**: [DIY wired 60% keyboard](https://imgur.com/a/zwsDN) by [p3lim](https://github.com/p3lim). +- https://github.com/p3lim/keyboard_firmware + +**Nerd, Kitten Paw, Lightsaber, Phantom, Lightpad, Ergodox** on [xauser](https://github.com/xauser)'s repository +- https://github.com/xauser/tmk_keyboard/tree/xauser + +**ErgoDox** on [cub-unanic](https://github.com/cub-uanic)'s repository +- https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox + +**Atreus** by [technomancy](https://atreus.technomancy.us) +- https://github.com/technomancy/tmk_keyboard/tree/atreus/keyboard/atreus + +**[mcdox](https://github.com/DavidMcEwan/mcdox)** +- https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox + + +### converters \ No newline at end of file diff --git a/docs/tmk_own_projects.md b/docs/tmk_own_projects.md new file mode 100644 index 0000000000..fb5b2c9906 --- /dev/null +++ b/docs/tmk_own_projects.md @@ -0,0 +1,69 @@ +## TMK own projects by hasu +Located in [tmk_keyboard](https://github.com/tmk/tmk_keyboard/tree/master/) repository. + +### converter +* [ps2_usb] - [PS/2 keyboard to USB][GH_ps2] +* [adb_usb] - [ADB keyboard to USB][GH_adb] +* [m0110_usb] - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110] +* [terminal_usb] - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal] +* [news_usb] - [Sony NEWS keyboard to USB][GH_news] +* [x68k_usb] - [Sharp X68000 keyboard to USB][GH_x68k] +* [sun_usb] - [Sun] to USB(type4, 5 and 3?) +* [pc98_usb] - [PC98] to USB +* [usb_usb] - USB to USB(experimental) +* [ascii_usb] - ASCII(Serial console terminal) to USB +* [ibm4704_usb] - [IBM 4704 keyboard Converter][GH_ibm4704] + +### keyboard +* [hhkb] - [Happy Hacking Keyboard pro][GH_hhkb] +* [gh60] - [GH60][GH60_diy] DIY 60% keyboard [prototype][GH60_proto] +* [hbkb] - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod) +* [hid_liber] - [HID liberation][HID_liber] controller (by alaricljs) +* [phantom] - [Phantom] keyboard (by Tranquilite) +* [IIgs_Standard] - Apple [IIGS] keyboard mod(by JeffreySung) +* [macway] - [Compact keyboard mod][GH_macway] [retired] +* [KMAC] - Korean custom keyboard +* [Lightsaber] - Korean custom keyboard + +[ps2_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/ps2_usb/ +[adb_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/adb_usb/ +[m0110_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/m0110_usb +[terminal_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/terminal_usb/ +[news_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/news_usb/ +[x68k_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/x68k_usb/ +[sun_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/sun_usb/ +[pc98_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/pc98_usb/ +[usb_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb/ +[ascii_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/ascii_usb/ +[ibm4704_usb]: https://github.com/tmk/tmk_keyboard/tree/master/converter/ibm4704_usb +[hhkb]: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/hhkb/ +[gh60]: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/gh60/ +[hbkb]: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/hbkb/ +[hid_liber]: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/hid_liber/ +[phantom]: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/phantom/ +[IIgs_Standard]: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/IIgs/ +[macway]: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/macway/ +[KMAC]: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/kmac/ +[Lightsaber]: https://github.com/tmk/tmk_keyboard/tree/master/keyboard/lightsaber/ + +[GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930 +[GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047 +[GH_ps2]: http://geekhack.org/showwiki.php?title=Island:14618 +[GH_adb]: http://geekhack.org/showwiki.php?title=Island:14290 +[GH_hhkb_bt]: http://geekhack.org/showwiki.php?title=Island:20851 +[GH_m0110]: http://geekhack.org/showwiki.php?title=Island:24965 +[GH_news]: http://geekhack.org/showwiki.php?title=Island:25759 +[GH_terminal]: http://geekhack.org/showwiki.php?title=Island:27272 +[GH_x68k]: http://geekhack.org/showwiki.php?title=Island:29060 +[GH_hbkb]: http://geekhack.org/showwiki.php?title=Island:29483 +[GH_ibm4704]: http://geekhack.org/index.php?topic=54706.0 +[HID_liber]: http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions +[Phantom]: http://geekhack.org/index.php?topic=26742 +[GH60_diy]: http://geekhack.org/index.php?topic=34959 +[GH60_proto]: http://geekhack.org/index.php?topic=37570.0 +[PC98]: http://en.wikipedia.org/wiki/NEC_PC-9801 +[Sun]: http://en.wikipedia.org/wiki/Sun-3 +[IIGS]: http://en.wikipedia.org/wiki/Apple_IIGS + + +See other [[TMK Based Projects]] \ No newline at end of file diff --git a/docs/tmk_readme.md b/docs/tmk_readme.md new file mode 100644 index 0000000000..85cf68d571 --- /dev/null +++ b/docs/tmk_readme.md @@ -0,0 +1,243 @@ +# TMK Documenation + +Features +-------- +These features can be used in your keyboard. + +* Multi-layer Keymap - Multiple keyboard layouts with layer switching +* Mouse key - Mouse control with keyboard +* System Control Key - Power Down, Sleep, Wake Up and USB Remote Wake up +* Media Control Key - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc +* USB NKRO - 120 keys(+ 8 modifiers) simultaneously +* PS/2 mouse support - PS/2 mouse(TrackPoint) as composite device +* Keyboard protocols - PS/2, ADB, M0110, Sun and other old keyboard protocols +* User Function - Customizable function of key with writing code +* Macro - Very primitive at this time +* Keyboard Tricks - Oneshot modifier and modifier with tapping feature +* Debug Console - Messages for debug and interaction with firmware +* Virtual DIP Switch - Configurations stored EEPROM(Boot Magic) +* Locking CapsLock - Mechanical switch support for CapsLock +* Breathing Sleep LED - Sleep indicator with charm during USB suspend +* Backlight - Control backlight levels + + + +Projects +-------- +You can find some keyboard specific projects under `converter` and `keyboard` directory. + +## Main projects + +### OLKB products +* [planck](keyboards/planck/) - [Planck] Ortholinear 40% keyboard +* [preonic](keyboards/preonic/) - [Preonic] Ortholinear 50% keyboard +* [atomic](keyboards/atomic/) - [Atomic] Ortholinear 60% keyboard + +### Ergodox EZ +* [ergodox_ez](keyboards/ergodox/ez) - [Ergodox_EZ] Assembled split keyboard + +## Other projects + +### converter +* [ps2_usb](converter/ps2_usb/) - [PS/2 keyboard to USB][GH_ps2] +* [adb_usb](converter/adb_usb/) - [ADB keyboard to USB][GH_adb] +* [m0110_usb](converter/m0110_usb) - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110] +* [terminal_usb](converter/terminal_usb/) - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal] +* [news_usb](converter/news_usb/) - [Sony NEWS keyboard to USB][GH_news] +* [x68k_usb](converter/x68k_usb/) - [Sharp X68000 keyboard to USB][GH_x68k] +* [sun_usb](converter/sun_usb/) - [Sun] to USB(type4, 5 and 3?) +* [pc98_usb](converter/pc98_usb/) - [PC98] to USB +* [usb_usb](converter/usb_usb/) - USB to USB(experimental) +* [ascii_usb](converter/ascii_usb/) - ASCII(Serial console terminal) to USB +* [ibm4704_usb](converter/ibm4704_usb) - [IBM 4704 keyboard Converter][GH_ibm4704] + +### keyboard +* [hhkb](keyboards/hhkb/) - [Happy Hacking Keyboard pro][GH_hhkb] hasu's main board +* [gh60](keyboards/gh60/) - [GH60] DIY 60% keyboard [prototype][GH60_proto] hasu's second board +* [hbkb](keyboards/hbkb/) - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod) +* [hid_liber](keyboards/hid_liber/) - [HID liberation][HID_liber] controller (by alaricljs) +* [phantom](keyboards/phantom/) - [Phantom] keyboard (by Tranquilite) +* [IIgs_Standard](keyboards/IIgs/) - Apple [IIGS] keyboard mod(by JeffreySung) +* [macway](keyboards/macway/) - [Compact keyboard mod][GH_macway] [retired] +* [KMAC](keyboards/kmac/) - Korean custom keyboard +* [Lightsaber](keyboards/lightsaber/) - Korean custom keyboard +* [Infinity](keyboards/infinity/) - Massdrop [Infinity keyboard][Infinity] +* [NerD](keyboards/nerd/) - Korean custom keyboard +* [KittenPaw](keyboards/kitten_paw) - Custom Majestouch controller +* [Lightpad](keyboards/lightpad) - Korean custom keypad +* [ghost_squid](keyboards/ghost_squid/) - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt] + +### Extenal projects using tmk_keyboard +* [ErgoDox_cub-uanic][cub-uanic] - Split Ergonomic Keyboard [ErgoDox][ergodox_org] +* [mcdox][mcdox_tmk] - [mcdox][mcdox] + + +[GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930 +[GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047 +[GH_ps2]: http://geekhack.org/showwiki.php?title=Island:14618 +[GH_adb]: http://geekhack.org/showwiki.php?title=Island:14290 +[GH_hhkb_bt]: http://geekhack.org/showwiki.php?title=Island:20851 +[GH_m0110]: http://geekhack.org/showwiki.php?title=Island:24965 +[GH_news]: http://geekhack.org/showwiki.php?title=Island:25759 +[GH_terminal]: http://geekhack.org/showwiki.php?title=Island:27272 +[GH_x68k]: http://geekhack.org/showwiki.php?title=Island:29060 +[GH_hbkb]: http://geekhack.org/showwiki.php?title=Island:29483 +[GH_ibm4704]: http://geekhack.org/index.php?topic=54706.0 +[HID_liber]: http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions +[Phantom]: http://geekhack.org/index.php?topic=26742 +[GH60]: http://geekhack.org/index.php?topic=34959 +[GH60_proto]: http://geekhack.org/index.php?topic=37570.0 +[PC98]: http://en.wikipedia.org/wiki/NEC_PC-9801 +[Sun]: http://en.wikipedia.org/wiki/Sun-3 +[IIGS]: http://en.wikipedia.org/wiki/Apple_IIGS +[Infinity]: https://www.massdrop.com/buy/infinity-keyboard-kit +[ghost_squid]: http://deskthority.net/wiki/Costar_replacement_controllers#The_Ghost_Squid +[cmxt]: http://gaming.coolermaster.com/en/products/keyboard/quickfirext/ +[ergodox_org]: http://ergodox.org/ +[cub-uanic]: https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox +[mcdox]: https://github.com/DavidMcEwan/mcdox +[mcdox_tmk]: https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox +[Planck]: http://olkb.co/planck +[Preonic]: http://olkb.co/preonic +[Atomic]: http://olkb.co/atomic +[Ergodox_EZ]: https://www.indiegogo.com/projects/ergodox-ez-an-incredible-mechanical-keyboard + + +License +------- +**GPLv2** or later. Some protocol files are under **Modified BSD License**. + +Third party libraries like LUFA, PJRC and V-USB have their own license respectively. + + + +Build Firmware and Program Controller +------------------------------------- +See [build environment setup](build_environment_setup.md), or the readme in the particular keyboards/* folder. + + + +Change your keymap +------------------ +See [keymap.md](keymap.md). + + + +Magic Commands +-------------- +To see help press `Magic` + `H`. + +`Magic` key combination is `LShift` + `RShift` in many project, but `Power` key on ADB converter. +`Magic` keybind can be vary on each project, check `config.h` in project directory. + +Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed. + + ----- Command Help ----- + c: enter console mode + d: toggle debug enable + x: toggle matrix debug + k: toggle keyboard debug + m: toggle mouse debug + v: print device version & info + t: print timer count + s: print status + e: print eeprom config + n: toggle NKRO + 0/F10: switch to Layer0 + 1/F1: switch to Layer1 + 2/F2: switch to Layer2 + 3/F3: switch to Layer3 + 4/F4: switch to Layer4 + PScr: power down/remote wake-up + Caps: Lock Keyboard(Child Proof) + Paus: jump to bootloader + + + +Boot Magic Configuration - Virtual DIP Switch +--------------------------------------------- +Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable. +Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles. + +To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [tmk_core/common/bootmagic.h](/tmk_core/common/bootmagic.h). + +#### General +- Skip reading EEPROM to start with default configuration(`ESC`) +- Clear configuration stored in EEPROM to reset configuration(`Backspace`) + +#### Bootloader +- Kick up Bootloader(`B`) + +#### Debug +- Debug enable(`D`) +- Debug matrix enable(`D`+`X`) +- Debug keyboard enable(`D`+`K`) +- Debug mouse enable(`D`+`M`) + +#### Keymap +- Swap Control and CapsLock(`Left Control`) +- Change CapsLock to Control(`Caps Lock`) +- Swap LeftAlt and Gui(`Left Alt`) +- Swap RightAlt and Gui(`Right Alt`) +- Disable Gui(`Left Gui`) +- Swap Grave and Escape(`Grave`) +- Swap BackSlash and BackSpace(`Back Slash`) +- Enable NKRO on boot(`N`) + +#### Default Layer +- Set Default Layer to 0(`0`) +- Set Default Layer to 1(`1`) +- Set Default Layer to 2(`2`) +- Set Default Layer to 3(`3`) +- Set Default Layer to 4(`4`) +- Set Default Layer to 5(`5`) +- Set Default Layer to 6(`6`) +- Set Default Layer to 7(`7`) + + + +Mechanical Locking support +-------------------------- +This feature makes it possible for you to use mechanical locking switch for `CapsLock`, `NumLock` +or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LN +UM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Res +ync option tries to keep switch state consistent with keyboard LED state. + + #define LOCKING_SUPPORT_ENABLE + #define LOCKING_RESYNC_ENABLE + + + +Start Your Own Project +----------------------- +**TBD** + + + +Debugging +-------- +Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack. + +You can use xprintf() to display debug info on `hid_listen`, see `tmk_core/common/xprintf.h`. + + + +Files and Directories +------------------- +### Top +* tmk_core/ - core library +* keyboards/ - keyboard projects +* converter/ - protocol converter projects +* doc/ - documents + + + +Coding Style +------------- +- Doesn't use Tab to indent, use 4-spaces instead. + + + +Other Keyboard Firmware Projects +------------------ +You can learn a lot about keyboard firmware from these. See [docs/other_projects.md](other_projects.md). diff --git a/docs/unicode_and_additional_language_support.md b/docs/unicode_and_additional_language_support.md new file mode 100644 index 0000000000..562dae4b5c --- /dev/null +++ b/docs/unicode_and_additional_language_support.md @@ -0,0 +1,54 @@ +## Unicode support + +There are three Unicode keymap definition method available in QMK: + +### UNICODE_ENABLE + +Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in +keymap file, where *n* is a 4 digit hexadecimal. + +### UNICODEMAP_ENABLE + +Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping +table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. +The keycode function is `X(n)` where *n* is the array index of the mapping +table. + +### UCIS_ENABLE + +TBD + +Unicode input in QMK works by inputing a sequence of characters to the OS, +sort of like macro. Unfortunately, each OS has different ideas on how Unicode is inputted. + +This is the current list of Unicode input method in QMK: + +* UC_OSX: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex. +* UC_LNX: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else. +* UC_WIN: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead. +* UC_WINC: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows. + +## Additional language support + +In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware. + +## International Characters on Windows + +[AutoHotkey](https://autohotkey.com) allows Windows users to create custom hotkeys among others. + +The method does not require Unicode support in the keyboard itself but depends instead of AutoHotkey running in the background. + +First you need to select a modifier combination that is not in use by any of your programs. +CtrlAltWin is not used very widely and should therefore be perfect for this. +There is a macro defined for a mod-tab combo `LCAG_T`. +Add this mod-tab combo to a key on your keyboard, e.g.: `LCAG_T(KC_TAB)`. +This makes the key behave like a tab key if pressed and released immediately but changes it to the modifier if used with another key. + +In the default script of AutoHotkey you can define custom hotkeys. + + <^