From ce6698865046c2d5e5fae73a74323048036e7d44 Mon Sep 17 00:00:00 2001
From: tmk <hasu@tmk-kbd.com>
Date: Fri, 16 Jan 2015 08:26:59 +0900
Subject: hhkb_rn42: Move doc

---
 keyboard/hhkb_rn42/PowerSave.txt      | 115 ----------------------------------
 keyboard/hhkb_rn42/rn42/PowerSave.txt |  76 ++++++++++++++++++++++
 2 files changed, 76 insertions(+), 115 deletions(-)
 delete mode 100644 keyboard/hhkb_rn42/PowerSave.txt
 create mode 100644 keyboard/hhkb_rn42/rn42/PowerSave.txt

diff --git a/keyboard/hhkb_rn42/PowerSave.txt b/keyboard/hhkb_rn42/PowerSave.txt
deleted file mode 100644
index 9aa89f4416..0000000000
--- a/keyboard/hhkb_rn42/PowerSave.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-RN-42
-=====
-
-
-12/11
-Power Comsumption
-MCU+HHKB
---------
-Battery drive:
-    idle    18.9mA
-    active  35.8mA
-
-USB powered:
-    40.0mA
-
-
-HHKB key switch power control
------------------------------
-MOS FET Nch: BSS138 or IRLML6344T, either works and no apparent difference.
-Normally on(pull-up) or off(pull-down)? interms of power saving it prefers pull-down?
-
-Pull-down will be better for power saving, normally off.
-
-
-
-Used Timer
-----------
-
-8MHz clock
-----------
-1) 16MHz xtal with system prescaler div2: F_CPU=8MHz, F_USB=16MHz
-2) 8MHz xtal with div1: F_CPU=8MHz, F_USB=8MHz
-Hardware USART doesn't work at 115200bps with 8MHz(F_CPU).
-
-workaround:
-a) use Sotwre serial for communcation with RN-42
-b) reduce baud of RN-42 to lower rate;(factory default is 115200bps)
-10/03
-
-
-
-Slave mode
-----------
-Discovery/Inquire
-Connect/Page
-
-SI,0012
-SJ,0012
-InqWindw=0100
-PagWindw=0100
-
-
-Sniff mode
-----------
-0.625ms * <hex>
-SW,0320     Very sluggish. Type is not lost but very slow to register.
-SW,0160     Still sluggish. may transposed? can type but ...
-            Mouse point move intermittently
-SW,0020     feel a bit late like stumble(20ms)
-SW,0010     feel no latency(10ms)
-
-
-Deep sleep
-----------
-SW,8010
-
-
-TX power
---------
-SY,fff4
-
-
-IO pins
--------
-S%,1000         status led and connection control don't work
-                GPIO5: status LED
-                GPIO6: Connection control
-                GPIO2: linked status
-
-
-
-
-
-Ver 6.15 04/26/2013
-(c) Roving Networks
-***Settings***
-BTA=00066667BBE9
-BTName=tmkBT-BBE9
-Baudrt(SW4)=115K
-Mode  =DTR
-Authen=1
-Bonded=0
-Rem=001BDC06415B
-***ADVANCED Settings***
-SrvName= keyboard/mouse
-SrvClass=0000
-DevClass=1F00
-InqWindw=0012
-PagWindw=0012
-CfgTimer=255
-StatuStr=NULL
-HidFlags=3c
-DTRtimer=8
-KeySwapr=0
-***OTHER Settings***
-Profile= HID
-CfgChar= $
-SniffEna=8010
-LowPower=0          S|,
-TX Power=fff4       SY,
-IOPorts= 0
-IOValues=0
-Sleeptmr=0
-DebugMod=0
-RoleSwch=0
diff --git a/keyboard/hhkb_rn42/rn42/PowerSave.txt b/keyboard/hhkb_rn42/rn42/PowerSave.txt
new file mode 100644
index 0000000000..8aea1c6dd2
--- /dev/null
+++ b/keyboard/hhkb_rn42/rn42/PowerSave.txt
@@ -0,0 +1,76 @@
+Power Saving
+============
+
+
+MCU+HHKB Power Comsumption
+--------------------------
+Battery drive:
+    idle    18.9mA
+    active  35.8mA
+
+USB powered:
+    40.0mA
+
+
+HHKB key switch power control
+-----------------------------
+MOS FET Nch: BSS138 or IRLML6344T, either works and no apparent difference.
+Normally on(pull-up) or off(pull-down)? interms of power saving it prefers pull-down?
+
+Pull-down will be better for power saving, normally off.
+
+
+
+Used Timer
+----------
+
+8MHz clock
+----------
+1) 16MHz xtal with system prescaler div2: F_CPU=8MHz, F_USB=16MHz
+2) 8MHz xtal with div1: F_CPU=8MHz, F_USB=8MHz
+Hardware USART doesn't work at 115200bps with 8MHz(F_CPU).
+
+workaround:
+a) use Sotwre serial for communcation with RN-42
+b) reduce baud of RN-42 to lower rate;(factory default is 115200bps)
+10/03
+
+
+
+Slave mode
+----------
+Discovery/Inquire
+Connect/Page
+
+SI,0012
+SJ,0012
+InqWindw=0100
+PagWindw=0100
+
+
+Sniff mode
+----------
+0.625ms * <hex>
+SW,0320     Very sluggish. Type is not lost but very slow to register.
+SW,0160     Still sluggish. may transposed? can type but ...
+            Mouse point move intermittently
+SW,0020     feel a bit late like stumble(20ms)
+SW,0010     feel no latency(10ms)
+
+
+Deep sleep
+----------
+SW,8010
+
+
+TX power
+--------
+SY,fff4
+
+
+IO pins
+-------
+S%,1000         status led and connection control don't work
+                GPIO5: status LED
+                GPIO6: Connection control
+                GPIO2: linked status
-- 
cgit v1.2.1