From a21e487fbc8bf81d66f32224477f0db52b34a3f3 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 10 Jul 2020 13:15:37 +1000 Subject: Consolidate udev rules into a single file --- docs/faq_build.md | 123 +++++++++++++++++++----------------------------------- 1 file changed, 43 insertions(+), 80 deletions(-) diff --git a/docs/faq_build.md b/docs/faq_build.md index e2d0f9b27a..990ebe3aff 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -13,63 +13,66 @@ An example of using `sudo`, when your controller is ATMega32u4: or just: - $ sudo make ::dfu + $ sudo make ::flash Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible. ### Linux `udev` Rules -On Linux, you'll need proper privileges to access the MCU. You can either use -`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. Once added run the following: -```console -sudo udevadm control --reload-rules -sudo udevadm trigger -``` -**/etc/udev/rules.d/50-atmel-dfu.rules:** -``` -# Atmel ATMega32U4 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess", RUN{builtin}+="uaccess" -# Atmel USBKEY AT90USB1287 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess", RUN{builtin}+="uaccess" -# Atmel ATMega32U2 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess", RUN{builtin}+="uaccess" +On Linux, you'll need proper privileges to communicate with the bootloader device. You can either use `sudo` when flashing firmware, or place this file in `/etc/udev/rules.d/`: + +**/etc/udev/rules.d/50-qmk.rules:** ``` +# Atmel DFU +# ATmega16U2 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess" +# ATmega32U2 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess" +# ATmega16U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess" +# ATmega32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess" +# AT90USB128 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess" +# AT90USB128 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess" -**/etc/udev/rules.d/54-input-club-keyboard.rules:** +# Input Club +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess" -``` -# Input Club keyboard bootloader -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess", RUN{builtin}+="uaccess" -``` +# STM32duino +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1EAF", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess" +# STM32 DFU +SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="DF11", TAG+="uaccess", RUN{builtin}+="uaccess" + +# BootloadHID +SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DF", TAG+="uaccess", RUN{builtin}+="uaccess" + +# USBAspLoader +SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uaccess", RUN{builtin}+="uaccess" -**/etc/udev/rules.d/55-caterina.rules:** -``` # ModemManager should ignore the following devices -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +# Atmel SAM-BA (Massdrop) +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB" ATTRS{idProduct}=="6124" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +# Caterina +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" ``` -**Note:** With older (before 1.12) ModemManager, filtering only works when not in strict mode, the following commands can update that settings: -```console -printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf -sudo systemctl daemon-reload -sudo systemctl restart ModemManager -``` +Once added, run the following: -**/etc/udev/rules.d/56-dfu-util.rules:** ``` -# stm32duino -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess" -# Generic stm32 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess", RUN{builtin}+="uaccess" +sudo udevadm control --reload-rules +sudo udevadm trigger ``` -**/etc/udev/rules.d/57-bootloadhid.rules:** +**Note:** With older versions of ModemManager (< 1.12), filtering only works when not in strict mode. The following commands can update that setting: + ``` -# bootloadHID -SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess", RUN{builtin}+="uaccess" +printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf +sudo systemctl daemon-reload +sudo systemctl restart ModemManager ``` ### Serial device is not detected in bootloader mode on Linux @@ -96,46 +99,6 @@ You can buy a really unique VID:PID here. I don't think you need this for person - http://www.obdev.at/products/vusb/license.html - http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1 -## BOOTLOADER_SIZE for AVR -Note that Teensy2.0++ bootloader size is 2048byte. Some Makefiles may have wrong comment. - -``` -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 2048 -# Atmel DFU loader 4096 (TMK Alt Controller) -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=2048 -``` - -## `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` on MacOS - -This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled. - -The solution is to remove and reinstall all affected modules. - -``` -brew rm avr-gcc avr-gcc@8 dfu-programmer dfu-util gcc-arm-none-eabi arm-gcc-bin@8 avrdude qmk -brew install qmk/qmk/qmk -brew link --force avr-gcc@8 -brew link --force arm-gcc-bin@8 -``` - -### `avr-gcc` and LUFA - -If you updated your `avr-gcc` and you see errors involving LUFA, for example: - -`lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'` - -For now, you need to rollback `avr-gcc` to 8 in Homebrew. - -``` -brew uninstall --force avr-gcc -brew install avr-gcc@8 -brew link --force avr-gcc@8 -``` - ### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019) Due to how EEPROM works on ARM based chips, saved settings may no longer be valid. This affects the default layers, and *may*, under certain circumstances we are still figuring out, make the keyboard unusable. Resetting the EEPROM will correct this. -- cgit v1.2.1 From 07e37c857c76154325774d56af53d94d99016cff Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sat, 11 Jul 2020 12:37:01 +1000 Subject: Update rules in doctor.py --- docs/faq_build.md | 4 ++-- lib/python/qmk/cli/doctor.py | 33 ++++++++++++++++++++++++--------- 2 files changed, 26 insertions(+), 11 deletions(-) diff --git a/docs/faq_build.md b/docs/faq_build.md index 990ebe3aff..41a11bb58d 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -32,7 +32,7 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uacc SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U4 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess" -# AT90USB128 +# AT90USB64 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB128 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess" @@ -54,7 +54,7 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uacc # ModemManager should ignore the following devices # Atmel SAM-BA (Massdrop) SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB" ATTRS{idProduct}=="6124" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" -# Caterina +# Caterina (Pro Micro) SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index 4d7ba52181..46a2180b22 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -149,15 +149,30 @@ def check_udev_rules(): ok = True udev_dir = Path("/etc/udev/rules.d/") desired_rules = { - 'dfu': {_udev_rule("03eb", "2ff4"), _udev_rule("03eb", "2ffb"), _udev_rule("03eb", "2ff0")}, - 'input_club': {_udev_rule("1c11", "b007")}, - 'stm32': {_udev_rule("1eaf", "0003"), _udev_rule("0483", "df11")}, - 'bootloadhid': {_udev_rule("16c0", "05df")}, - 'caterina': { - _udev_rule("2341", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), - _udev_rule("1b4f", "9205", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), - _udev_rule("1b4f", "9203", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), - _udev_rule("2a03", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"') + 'qmk': { + # Atmel DFU + _udev_rule("03EB", "2FEF"), # ATmega16U2 + _udev_rule("03EB", "2FF0"), # ATmega32U2 + _udev_rule("03EB", "2FF3"), # ATmega16U4 + _udev_rule("03EB", "2FF4"), # ATmega32U4 + _udev_rule("03EB", "2FF9"), # AT90USB64 + _udev_rule("03EB", "2FFB"), # AT90USB128 + # Kiibohd bootloader + _udev_rule("1C11", "B007"), + # STM32duino + _udev_rule("1EAF", "0003"), + # STM32 DFU + _udev_rule("0483", "DF11"), + # BootloadHID + _udev_rule("16C0", "05DF"), + # USBAspLoader + _udev_rule("16C0", "05DC"), + # Atmel SAM-Ba (Massdrop) + _udev_rule("03EB", "6124"), + # Caterina (Pro Micro) + _udev_rule("1B4F", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Sparkfun + _udev_rule("2341", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Arduino SA + _udev_rule("2A03", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"') # dog hunter AG } } -- cgit v1.2.1 From 510138f525a5ba216a170a0e0e94a4cf940a0c67 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sat, 11 Jul 2020 12:52:36 +1000 Subject: Simplify doctor rule checking --- lib/python/qmk/cli/doctor.py | 67 +++++++++++++++++++++----------------------- 1 file changed, 32 insertions(+), 35 deletions(-) diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index 46a2180b22..81b27216ef 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -149,31 +149,29 @@ def check_udev_rules(): ok = True udev_dir = Path("/etc/udev/rules.d/") desired_rules = { - 'qmk': { - # Atmel DFU - _udev_rule("03EB", "2FEF"), # ATmega16U2 - _udev_rule("03EB", "2FF0"), # ATmega32U2 - _udev_rule("03EB", "2FF3"), # ATmega16U4 - _udev_rule("03EB", "2FF4"), # ATmega32U4 - _udev_rule("03EB", "2FF9"), # AT90USB64 - _udev_rule("03EB", "2FFB"), # AT90USB128 - # Kiibohd bootloader - _udev_rule("1C11", "B007"), - # STM32duino - _udev_rule("1EAF", "0003"), - # STM32 DFU - _udev_rule("0483", "DF11"), - # BootloadHID - _udev_rule("16C0", "05DF"), - # USBAspLoader - _udev_rule("16C0", "05DC"), - # Atmel SAM-Ba (Massdrop) - _udev_rule("03EB", "6124"), - # Caterina (Pro Micro) - _udev_rule("1B4F", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Sparkfun - _udev_rule("2341", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Arduino SA - _udev_rule("2A03", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"') # dog hunter AG - } + # Atmel DFU + _udev_rule("03EB", "2FEF"), # ATmega16U2 + _udev_rule("03EB", "2FF0"), # ATmega32U2 + _udev_rule("03EB", "2FF3"), # ATmega16U4 + _udev_rule("03EB", "2FF4"), # ATmega32U4 + _udev_rule("03EB", "2FF9"), # AT90USB64 + _udev_rule("03EB", "2FFB"), # AT90USB128 + # Kiibohd bootloader + _udev_rule("1C11", "B007"), + # STM32duino + _udev_rule("1EAF", "0003"), + # STM32 DFU + _udev_rule("0483", "DF11"), + # BootloadHID + _udev_rule("16C0", "05DF"), + # USBAspLoader + _udev_rule("16C0", "05DC"), + # Atmel SAM-Ba (Massdrop) + _udev_rule("03EB", "6124"), + # Caterina (Pro Micro) + _udev_rule("1B4F", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Sparkfun + _udev_rule("2341", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Arduino SA + _udev_rule("2A03", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"') # dog hunter AG } # These rules are no longer recommended, only use them to check for their presence. @@ -197,18 +195,17 @@ def check_udev_rules(): current_rules.add(line) # Check if the desired rules are among the currently present rules - for bootloader, rules in desired_rules.items(): + for rules in desired_rules.items(): # For caterina, check if ModemManager is running - if bootloader == "caterina": - if check_modem_manager(): - ok = False - cli.log.warn("{bg_yellow}Detected ModemManager without the necessary udev rules. Please either disable it or set the appropriate udev rules if you are using a Pro Micro.") + if check_modem_manager(): + ok = False + cli.log.warn("{bg_yellow}Detected ModemManager without the necessary udev rules. Please either disable it or set the appropriate udev rules if you are using a Pro Micro.") if not rules.issubset(current_rules): - deprecated_rule = deprecated_rules.get(bootloader) - if deprecated_rule and deprecated_rule.issubset(current_rules): - cli.log.warn("{bg_yellow}Found old, deprecated udev rules for '%s' boards. The new rules on https://docs.qmk.fm/#/faq_build?id=linux-udev-rules offer better security with the same functionality.", bootloader) - else: - cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. You'll need to use `sudo` in order to flash them.", bootloader) + for bootloader, rules in deprecated_rules.items(): + if deprecated_rule and deprecated_rule.issubset(current_rules): + cli.log.warn("{bg_yellow}Found old, deprecated udev rules for '%s' boards. The new rules on https://docs.qmk.fm/#/faq_build?id=linux-udev-rules offer better security with the same functionality.", bootloader) + else: + cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. You'll need to use `sudo` in order to flash them.", bootloader) return ok -- cgit v1.2.1 From eee6dd35446542c40c0f2a7827d9754aefd248e9 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sat, 11 Jul 2020 21:05:26 +1000 Subject: Fix errors --- lib/python/qmk/cli/doctor.py | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index 81b27216ef..89ac7c82a0 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -150,12 +150,12 @@ def check_udev_rules(): udev_dir = Path("/etc/udev/rules.d/") desired_rules = { # Atmel DFU - _udev_rule("03EB", "2FEF"), # ATmega16U2 - _udev_rule("03EB", "2FF0"), # ATmega32U2 - _udev_rule("03EB", "2FF3"), # ATmega16U4 - _udev_rule("03EB", "2FF4"), # ATmega32U4 - _udev_rule("03EB", "2FF9"), # AT90USB64 - _udev_rule("03EB", "2FFB"), # AT90USB128 + _udev_rule("03EB", "2FEF"), # ATmega16U2 + _udev_rule("03EB", "2FF0"), # ATmega32U2 + _udev_rule("03EB", "2FF3"), # ATmega16U4 + _udev_rule("03EB", "2FF4"), # ATmega32U4 + _udev_rule("03EB", "2FF9"), # AT90USB64 + _udev_rule("03EB", "2FFB"), # AT90USB128 # Kiibohd bootloader _udev_rule("1C11", "B007"), # STM32duino @@ -169,9 +169,9 @@ def check_udev_rules(): # Atmel SAM-Ba (Massdrop) _udev_rule("03EB", "6124"), # Caterina (Pro Micro) - _udev_rule("1B4F", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Sparkfun - _udev_rule("2341", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Arduino SA - _udev_rule("2A03", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"') # dog hunter AG + _udev_rule("1B4F", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Sparkfun + _udev_rule("2341", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Arduino SA + _udev_rule("2A03", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"') # dog hunter AG } # These rules are no longer recommended, only use them to check for their presence. @@ -201,8 +201,8 @@ def check_udev_rules(): ok = False cli.log.warn("{bg_yellow}Detected ModemManager without the necessary udev rules. Please either disable it or set the appropriate udev rules if you are using a Pro Micro.") if not rules.issubset(current_rules): - for bootloader, rules in deprecated_rules.items(): - if deprecated_rule and deprecated_rule.issubset(current_rules): + for bootloader, rule in deprecated_rules.items(): + if rule and rule.issubset(current_rules): cli.log.warn("{bg_yellow}Found old, deprecated udev rules for '%s' boards. The new rules on https://docs.qmk.fm/#/faq_build?id=linux-udev-rules offer better security with the same functionality.", bootloader) else: cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. You'll need to use `sudo` in order to flash them.", bootloader) -- cgit v1.2.1 From 72b1ff5899763cf76b1cc1669c684fbc45cee7c4 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Mon, 13 Jul 2020 01:24:28 +1000 Subject: Add TMK "FEED" VID to list of deprecated udev rules --- docs/faq_debug.md | 14 -------------- lib/python/qmk/cli/doctor.py | 1 + 2 files changed, 1 insertion(+), 14 deletions(-) diff --git a/docs/faq_debug.md b/docs/faq_debug.md index 08c84fe4fd..7d5473678b 100644 --- a/docs/faq_debug.md +++ b/docs/faq_debug.md @@ -31,20 +31,6 @@ Check: - try using 'print' function instead of debug print. See **common/print.h**. - disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97). -## Linux or UNIX Like System Requires Super User Privilege -Just use 'sudo' to execute *hid_listen* with privilege. -``` -$ sudo hid_listen -``` - -Or add an *udev rule* for TMK devices with placing a file in rules directory. The directory may vary on each system. - -File: /etc/udev/rules.d/52-tmk-keyboard.rules(in case of Ubuntu) -``` -# tmk keyboard products https://github.com/tmk/tmk_keyboard -SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666" -``` - *** # Miscellaneous diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index 89ac7c82a0..1bfec6349b 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -181,6 +181,7 @@ def check_udev_rules(): 'stm32': {_deprecated_udev_rule("1eaf", "0003"), _deprecated_udev_rule("0483", "df11")}, 'bootloadhid': {_deprecated_udev_rule("16c0", "05df")}, 'caterina': {'ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"', 'ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"'} + 'tmk': {_deprecated_udev_rule("feed")} } if udev_dir.exists(): -- cgit v1.2.1 From 7921c5d9b8d5726a916a89e01e7aa92d82fed067 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Mon, 13 Jul 2020 01:26:46 +1000 Subject: A comma would be nice --- lib/python/qmk/cli/doctor.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index 1bfec6349b..a431a160cc 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -180,7 +180,7 @@ def check_udev_rules(): 'input_club': {_deprecated_udev_rule("1c11")}, 'stm32': {_deprecated_udev_rule("1eaf", "0003"), _deprecated_udev_rule("0483", "df11")}, 'bootloadhid': {_deprecated_udev_rule("16c0", "05df")}, - 'caterina': {'ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"', 'ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"'} + 'caterina': {'ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"', 'ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"'}, 'tmk': {_deprecated_udev_rule("feed")} } -- cgit v1.2.1 From 4bee445c2f086a31e34135c2a08cf4fbfe7daf94 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Mon, 13 Jul 2020 01:33:43 +1000 Subject: Split rules back up into bootloaders --- lib/python/qmk/cli/doctor.py | 75 ++++++++++++++++++++++++-------------------- 1 file changed, 41 insertions(+), 34 deletions(-) diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index a431a160cc..dac1533ac6 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -149,35 +149,41 @@ def check_udev_rules(): ok = True udev_dir = Path("/etc/udev/rules.d/") desired_rules = { - # Atmel DFU - _udev_rule("03EB", "2FEF"), # ATmega16U2 - _udev_rule("03EB", "2FF0"), # ATmega32U2 - _udev_rule("03EB", "2FF3"), # ATmega16U4 - _udev_rule("03EB", "2FF4"), # ATmega32U4 - _udev_rule("03EB", "2FF9"), # AT90USB64 - _udev_rule("03EB", "2FFB"), # AT90USB128 - # Kiibohd bootloader - _udev_rule("1C11", "B007"), - # STM32duino - _udev_rule("1EAF", "0003"), - # STM32 DFU - _udev_rule("0483", "DF11"), - # BootloadHID - _udev_rule("16C0", "05DF"), - # USBAspLoader - _udev_rule("16C0", "05DC"), - # Atmel SAM-Ba (Massdrop) - _udev_rule("03EB", "6124"), - # Caterina (Pro Micro) - _udev_rule("1B4F", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Sparkfun - _udev_rule("2341", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Arduino SA - _udev_rule("2A03", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"') # dog hunter AG + 'atmel-dfu': { + _udev_rule("03EB", "2FEF"), # ATmega16U2 + _udev_rule("03EB", "2FF0"), # ATmega32U2 + _udev_rule("03EB", "2FF3"), # ATmega16U4 + _udev_rule("03EB", "2FF4"), # ATmega32U4 + _udev_rule("03EB", "2FF9"), # AT90USB64 + _udev_rule("03EB", "2FFB") # AT90USB128 + }, + 'kiibohd': { + _udev_rule("1C11", "B007") + }, + 'stm32': { + _udev_rule("1EAF", "0003"), # STM32duino + _udev_rule("0483", "DF11") # STM32 DFU + }, + 'bootloadhid': { + _udev_rule("16C0", "05DF") + }, + 'usbasploader': { + _udev_rule("16C0", "05DC") + }, + 'massdrop': { + _udev_rule("03EB", "6124") + }, + 'caterina': { + _udev_rule("1B4F", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Sparkfun + _udev_rule("2341", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Arduino SA + _udev_rule("2A03", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"') # dog hunter AG + } } # These rules are no longer recommended, only use them to check for their presence. deprecated_rules = { - 'dfu': {_deprecated_udev_rule("03eb", "2ff4"), _deprecated_udev_rule("03eb", "2ffb"), _deprecated_udev_rule("03eb", "2ff0")}, - 'input_club': {_deprecated_udev_rule("1c11")}, + 'atmel-dfu': {_deprecated_udev_rule("03eb", "2ff4"), _deprecated_udev_rule("03eb", "2ffb"), _deprecated_udev_rule("03eb", "2ff0")}, + 'kiibohd': {_deprecated_udev_rule("1c11")}, 'stm32': {_deprecated_udev_rule("1eaf", "0003"), _deprecated_udev_rule("0483", "df11")}, 'bootloadhid': {_deprecated_udev_rule("16c0", "05df")}, 'caterina': {'ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"', 'ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"'}, @@ -196,17 +202,18 @@ def check_udev_rules(): current_rules.add(line) # Check if the desired rules are among the currently present rules - for rules in desired_rules.items(): + for bootloader, rules in desired_rules.items(): # For caterina, check if ModemManager is running - if check_modem_manager(): - ok = False - cli.log.warn("{bg_yellow}Detected ModemManager without the necessary udev rules. Please either disable it or set the appropriate udev rules if you are using a Pro Micro.") + if bootloader == "caterina": + if check_modem_manager(): + ok = False + cli.log.warn("{bg_yellow}Detected ModemManager without the necessary udev rules. Please either disable it or set the appropriate udev rules if you are using a Pro Micro.") if not rules.issubset(current_rules): - for bootloader, rule in deprecated_rules.items(): - if rule and rule.issubset(current_rules): - cli.log.warn("{bg_yellow}Found old, deprecated udev rules for '%s' boards. The new rules on https://docs.qmk.fm/#/faq_build?id=linux-udev-rules offer better security with the same functionality.", bootloader) - else: - cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. You'll need to use `sudo` in order to flash them.", bootloader) + deprecated_rule = deprecated_rules.get(bootloader) + if deprecated_rule and deprecated_rule.issubset(current_rules): + cli.log.warn("{bg_yellow}Found old, deprecated udev rules for '%s' boards. The new rules on https://docs.qmk.fm/#/faq_build?id=linux-udev-rules offer better security with the same functionality.", bootloader) + else: + cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. You'll need to use `sudo` in order to flash them.", bootloader) return ok -- cgit v1.2.1 From ef1b050b32b7a6ec5037489503caa92a527f6ab3 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Mon, 13 Jul 2020 01:37:31 +1000 Subject: Link to docs page in "missing" case --- lib/python/qmk/cli/doctor.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index dac1533ac6..beb884a36f 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -213,7 +213,7 @@ def check_udev_rules(): if deprecated_rule and deprecated_rule.issubset(current_rules): cli.log.warn("{bg_yellow}Found old, deprecated udev rules for '%s' boards. The new rules on https://docs.qmk.fm/#/faq_build?id=linux-udev-rules offer better security with the same functionality.", bootloader) else: - cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. You'll need to use `sudo` in order to flash them.", bootloader) + cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. See https://docs.qmk.fm/#/faq_build?id=linux-udev-rules for more details.", bootloader) return ok -- cgit v1.2.1 From c2a0cebf8b8e42323d913c5c4b536578c07e0864 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Thu, 27 Aug 2020 13:13:30 +1000 Subject: Add Pololu VID --- docs/faq_build.md | 8 +++++--- lib/python/qmk/cli/doctor.py | 4 +++- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/docs/faq_build.md b/docs/faq_build.md index 41a11bb58d..7429446f29 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -55,9 +55,11 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uacc # Atmel SAM-BA (Massdrop) SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB" ATTRS{idProduct}=="6124" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Caterina (Pro Micro) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Spark Fun Electronics +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pololu Electronics +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Arduino SA +SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Adafruit Industries LLC +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # dog hunter AG ``` Once added, run the following: diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index beb884a36f..c1284bb898 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -174,8 +174,10 @@ def check_udev_rules(): _udev_rule("03EB", "6124") }, 'caterina': { - _udev_rule("1B4F", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Sparkfun + _udev_rule("1B4F", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Spark Fun Electronics + _udev_rule("1FFB", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Pololu Electronics _udev_rule("2341", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Arduino SA + _udev_rule("239A", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Adafruit Industries LLC _udev_rule("2A03", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"') # dog hunter AG } } -- cgit v1.2.1 From a0305f5e7e1ffc19ef2dba077d000915f2fdf35b Mon Sep 17 00:00:00 2001 From: fauxpark Date: Sat, 19 Sep 2020 05:40:25 +1000 Subject: Be more specific about Caterina devices, and add LilyPad PID --- docs/faq_build.md | 42 ++++++++++++++++++++++++------------------ lib/python/qmk/cli/doctor.py | 21 ++++++++++++++++----- 2 files changed, 40 insertions(+), 23 deletions(-) diff --git a/docs/faq_build.md b/docs/faq_build.md index 7429446f29..131844a2b7 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -24,18 +24,12 @@ On Linux, you'll need proper privileges to communicate with the bootloader devic **/etc/udev/rules.d/50-qmk.rules:** ``` # Atmel DFU -# ATmega16U2 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess" -# ATmega32U2 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess" -# ATmega16U4 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess" -# ATmega32U4 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess" -# AT90USB64 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess" -# AT90USB128 -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess" +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega16U2 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U2 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega16U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB64 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB128 # Input Club SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess" @@ -53,13 +47,25 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uacc # ModemManager should ignore the following devices # Atmel SAM-BA (Massdrop) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB" ATTRS{idProduct}=="6124" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" +SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" + # Caterina (Pro Micro) -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Spark Fun Electronics -SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pololu Electronics -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Arduino SA -SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Adafruit Industries LLC -SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03" TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # dog hunter AG +# Spark Fun Electronics +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pro Micro 3V3/8MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pro Micro 5V/16MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # LilyPad 3V3/8MHz (and some Pro Micro clones) +# Pololu Electronics +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # A-Star 32U4 +# Arduino SA +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Leonardo +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Micro +# Adafruit Industries LLC +SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Feather 32U4 +SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # ItsyBitsy 32U4 3V3/8MHz +SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # ItsyBitsy 32U4 5V/16MHz +# dog hunter AG +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Leonardo +SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Micro ``` Once added, run the following: diff --git a/lib/python/qmk/cli/doctor.py b/lib/python/qmk/cli/doctor.py index c1284bb898..57ac0835b3 100755 --- a/lib/python/qmk/cli/doctor.py +++ b/lib/python/qmk/cli/doctor.py @@ -174,11 +174,22 @@ def check_udev_rules(): _udev_rule("03EB", "6124") }, 'caterina': { - _udev_rule("1B4F", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Spark Fun Electronics - _udev_rule("1FFB", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Pololu Electronics - _udev_rule("2341", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Arduino SA - _udev_rule("239A", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Adafruit Industries LLC - _udev_rule("2A03", None, 'ENV{ID_MM_DEVICE_IGNORE}="1"') # dog hunter AG + # Spark Fun Electronics + _udev_rule("1B4F", "9203", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Pro Micro 3V3/8MHz + _udev_rule("1B4F", "9205", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Pro Micro 5V/16MHz + _udev_rule("1B4F", "9207", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # LilyPad 3V3/8MHz (and some Pro Micro clones) + # Pololu Electronics + _udev_rule("1FFB", "0101", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # A-Star 32U4 + # Arduino SA + _udev_rule("2341", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Leonardo + _udev_rule("2341", "0037", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Micro + # Adafruit Industries LLC + _udev_rule("239A", "000C", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Feather 32U4 + _udev_rule("239A", "000D", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # ItsyBitsy 32U4 3V3/8MHz + _udev_rule("239A", "000E", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # ItsyBitsy 32U4 5V/16MHz + # dog hunter AG + _udev_rule("2A03", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Leonardo + _udev_rule("2A03", "0037", 'ENV{ID_MM_DEVICE_IGNORE}="1"') # Micro } } -- cgit v1.2.1