From f090881aebbd7af74294b53fabdf55a35004f190 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 15 May 2022 04:24:35 -0700 Subject: [Feature] Add support for multiple switchs/solenoids to Haptic Feedback engine (#15657) --- docs/feature_haptic_feedback.md | 32 +++-- drivers/haptic/solenoid.c | 155 +++++++++++++++------ drivers/haptic/solenoid.h | 26 ++-- keyboards/handwired/onekey/blackpill_f411/config.h | 4 + keyboards/handwired/onekey/keymaps/haptic/keymap.c | 11 ++ keyboards/handwired/onekey/keymaps/haptic/rules.mk | 2 + quantum/haptic.c | 2 +- 7 files changed, 163 insertions(+), 69 deletions(-) create mode 100644 keyboards/handwired/onekey/keymaps/haptic/keymap.c create mode 100644 keyboards/handwired/onekey/keymaps/haptic/rules.mk diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index 63ac4305ff..f4546b6914 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -50,22 +50,28 @@ Not all keycodes below will work depending on which haptic mechanism you have ch ### Solenoids -First you will need a build a circuit to drive the solenoid through a mosfet as most MCU will not be able to provide the current needed to drive the coil in the solenoid. +The solenoid code supports relay switches, and similar hardware, as well as solenoids. -[Wiring diagram provided by Adafruit](https://cdn-shop.adafruit.com/product-files/412/solenoid_driver.pdf) +For a regular solenoid, you will need a build a circuit to drive the solenoid through a mosfet as most MCU will not be able to provide the current needed to drive the coil in the solenoid. +[Wiring diagram provided by Adafruit](https://cdn-shop.adafruit.com/product-files/412/solenoid_driver.pdf) -| Settings | Default | Description | -|----------------------------|----------------------|-------------------------------------------------------| -|`SOLENOID_PIN` | *Not defined* |Configures the pin that the Solenoid is connected to. | -|`SOLENOID_PIN_ACTIVE_LOW` | *Not defined* |If defined then the solenoid trigger pin is active low.| -|`SOLENOID_DEFAULT_DWELL` | `12` ms |Configures the default dwell time for the solenoid. | -|`SOLENOID_MIN_DWELL` | `4` ms |Sets the lower limit for the dwell. | -|`SOLENOID_MAX_DWELL` | `100` ms |Sets the upper limit for the dwell. | -|`SOLENOID_DWELL_STEP_SIZE` | `1` ms |The step size to use when `HPT_DWL*` keycodes are sent | -|`SOLENOID_DEFAULT_BUZZ` | `0` (disabled) |On HPT_RST buzz is set "on" if this is "1" | -|`SOLENOID_BUZZ_ACTUATED` | `SOLENOID_MIN_DWELL` |Actuated-time when the solenoid is in buzz mode | -|`SOLENOID_BUZZ_NONACTUATED` | `SOLENOID_MIN_DWELL` |Non-Actuated-time when the solenoid is in buzz mode | +For relay switches, the hardware may already contain all of that ciruitry, and just require VCC, GND and a data pin. + +| Settings | Default | Description | +|----------------------------|----------------------|--------------------------------------------------------------| +|`SOLENOID_PIN` | *Not defined* |Configures the pin that the switch is connected to. | +|`SOLENOID_PIN_ACTIVE_LOW` | *Not defined* |If defined then the switch trigger pin is active low. | +|`SOLENOID_PINS` | *Not defined* |Configures an array of pins to be used for switch activation. | +|`SOLENOID_PINS_ACTIVE_LOW` | *Not defined* |Allows you to specify how each pin is pulled for activation. | +|`SOLENOID_RANDOM_FIRE` | *Not defined* |When there are multiple solenoids, will select a random one to fire.| +|`SOLENOID_DEFAULT_DWELL` | `12` ms |Configures the default dwell time for the switch. | +|`SOLENOID_MIN_DWELL` | `4` ms |Sets the lower limit for the dwell. | +|`SOLENOID_MAX_DWELL` | `100` ms |Sets the upper limit for the dwell. | +|`SOLENOID_DWELL_STEP_SIZE` | `1` ms |The step size to use when `HPT_DWL*` keycodes are sent. | +|`SOLENOID_DEFAULT_BUZZ` | `0` (disabled) |On HPT_RST buzz is set "on" if this is "1" | +|`SOLENOID_BUZZ_ACTUATED` | `SOLENOID_MIN_DWELL` |Actuated-time when the switch is in buzz mode. | +|`SOLENOID_BUZZ_NONACTUATED` | `SOLENOID_MIN_DWELL` |Non-Actuated-time when the switch is in buzz mode. | * If solenoid buzz is off, then dwell time is how long the "plunger" stays activated. The dwell time changes how the solenoid sounds. * If solenoid buzz is on, then dwell time sets the length of the buzz, while `SOLENOID_BUZZ_ACTUATED` and `SOLENOID_BUZZ_NONACTUATED` set the (non-)actuation times withing the buzz period. diff --git a/drivers/haptic/solenoid.c b/drivers/haptic/solenoid.c index 14d868bffe..637a77da3d 100644 --- a/drivers/haptic/solenoid.c +++ b/drivers/haptic/solenoid.c @@ -20,11 +20,22 @@ #include "haptic.h" #include "gpio.h" #include "usb_device_state.h" - -bool solenoid_on = false; -bool solenoid_buzzing = false; -uint16_t solenoid_start = 0; -uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL; +#include + +uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL; +static pin_t solenoid_pads[] = SOLENOID_PINS; +#define NUMBER_OF_SOLENOIDS (sizeof(solenoid_pads) / sizeof(pin_t)) +bool solenoid_on[NUMBER_OF_SOLENOIDS] = {false}; +bool solenoid_buzzing[NUMBER_OF_SOLENOIDS] = {false}; +uint16_t solenoid_start[NUMBER_OF_SOLENOIDS] = {0}; +#ifdef SOLENOID_PIN_ACTIVE_LOW +# define low true +# define high false +#else +# define low false +# define high true +#endif +static bool solenoid_active_state[NUMBER_OF_SOLENOIDS]; extern haptic_config_t haptic_config; @@ -36,7 +47,7 @@ void solenoid_buzz_off(void) { haptic_set_buzz(0); } -void solenoid_set_buzz(int buzz) { +void solenoid_set_buzz(uint8_t buzz) { haptic_set_buzz(buzz); } @@ -44,59 +55,121 @@ void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; } -void solenoid_stop(void) { - SOLENOID_PIN_WRITE_INACTIVE(); - solenoid_on = false; - solenoid_buzzing = false; +/** + * @brief Stops a specific solenoid + * + * @param index select which solenoid to check/stop + */ +void solenoid_stop(uint8_t index) { + writePin(solenoid_pads[index], !solenoid_active_state[index]); + solenoid_on[index] = false; + solenoid_buzzing[index] = false; } -void solenoid_fire(void) { - if (!haptic_config.buzz && solenoid_on) return; - if (haptic_config.buzz && solenoid_buzzing) return; +/** + * @brief Fires off a specific solenoid + * + * @param index Selects which solenoid to fire + */ +void solenoid_fire(uint8_t index) { + if (!haptic_config.buzz && solenoid_on[index]) return; + if (haptic_config.buzz && solenoid_buzzing[index]) return; + + solenoid_on[index] = true; + solenoid_buzzing[index] = true; + solenoid_start[index] = timer_read(); + writePin(solenoid_pads[index], solenoid_active_state[index]); +} - solenoid_on = true; - solenoid_buzzing = true; - solenoid_start = timer_read(); - SOLENOID_PIN_WRITE_ACTIVE(); +/** + * @brief Handles selecting a non-active solenoid, and firing it. + * + */ +void solenoid_fire_handler(void) { +#ifndef SOLENOID_RANDOM_FIRE + if (NUMBER_OF_SOLENOIDS > 1) { + uint8_t i = rand() % NUMBER_OF_SOLENOIDS; + if (!solenoid_on[i]) { + solenoid_fire(i); + } + } else { + solenoid_fire(0); + } +#else + for (uint8_t i = 0; i < NUMBER_OF_SOLENOIDS; i++) { + if (!solenoid_on[i]) { + solenoid_fire(i); + break; + } + } +#endif } +/** + * @brief Checks active solenoid to stop them, and to handle buzz mode + * + */ void solenoid_check(void) { - uint16_t elapsed = 0; + uint16_t elapsed[NUMBER_OF_SOLENOIDS] = {0}; - if (!solenoid_on) return; + for (uint8_t i = 0; i < NUMBER_OF_SOLENOIDS; i++) { + if (!solenoid_on[i]) continue; - elapsed = timer_elapsed(solenoid_start); + elapsed[i] = timer_elapsed(solenoid_start[i]); - // Check if it's time to finish this solenoid click cycle - if (elapsed > solenoid_dwell) { - solenoid_stop(); - return; - } + // Check if it's time to finish this solenoid click cycle + if (elapsed[i] > solenoid_dwell) { + solenoid_stop(i); + continue; + } - // Check whether to buzz the solenoid on and off - if (haptic_config.buzz) { - if ((elapsed % (SOLENOID_BUZZ_ACTUATED + SOLENOID_BUZZ_NONACTUATED)) < SOLENOID_BUZZ_ACTUATED) { - if (!solenoid_buzzing) { - solenoid_buzzing = true; - SOLENOID_PIN_WRITE_ACTIVE(); - } - } else { - if (solenoid_buzzing) { - solenoid_buzzing = false; - SOLENOID_PIN_WRITE_INACTIVE(); + // Check whether to buzz the solenoid on and off + if (haptic_config.buzz) { + if ((elapsed[i] % (SOLENOID_BUZZ_ACTUATED + SOLENOID_BUZZ_NONACTUATED)) < SOLENOID_BUZZ_ACTUATED) { + if (!solenoid_buzzing[i]) { + solenoid_buzzing[i] = true; + writePin(solenoid_pads[i], solenoid_active_state[i]); + } + } else { + if (solenoid_buzzing[i]) { + solenoid_buzzing[i] = false; + writePin(solenoid_pads[i], !solenoid_active_state[i]); + } } } } } +/** + * @brief Initial configuration for solenoids + * + */ void solenoid_setup(void) { - SOLENOID_PIN_WRITE_INACTIVE(); - setPinOutput(SOLENOID_PIN); - if ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED)) { - solenoid_fire(); +#ifdef SOLENOID_PINS_ACTIVE_STATE + bool state_temp[] = SOLENOID_PINS_ACTIVE_STATE; + uint8_t bound_check = (sizeof(state_temp) / sizeof(bool)); +#endif + + for (uint8_t i = 0; i < NUMBER_OF_SOLENOIDS; i++) { +#ifdef SOLENOID_PINS_ACTIVE_STATE + solenoid_active_state[i] = (bound_check - i) ? state_temp[i] : high; +#else + solenoid_active_state[i] = high; +#endif + writePin(solenoid_pads[i], !solenoid_active_state[i]); + setPinOutput(solenoid_pads[i]); + if ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED)) { + solenoid_fire(i); + } } } +/** + * @brief stops solenoids prior to device reboot, to prevent them from being locked on + * + */ void solenoid_shutdown(void) { - SOLENOID_PIN_WRITE_INACTIVE(); + for (uint8_t i = 0; i < NUMBER_OF_SOLENOIDS; i++) { + writePin(solenoid_pads[i], !solenoid_active_state[i]); + } } diff --git a/drivers/haptic/solenoid.h b/drivers/haptic/solenoid.h index 653148154f..952f86e922 100644 --- a/drivers/haptic/solenoid.h +++ b/drivers/haptic/solenoid.h @@ -45,26 +45,24 @@ # define SOLENOID_BUZZ_NONACTUATED SOLENOID_MIN_DWELL #endif -#ifndef SOLENOID_PIN -# error SOLENOID_PIN not defined +#ifndef SOLENOID_PINS +# ifdef SOLENOID_PIN +# define SOLENOID_PINS \ + { SOLENOID_PIN } +# else +# error SOLENOID_PINS array not defined +# endif #endif -#ifdef SOLENOID_PIN_ACTIVE_LOW -# define SOLENOID_PIN_WRITE_ACTIVE() writePinLow(SOLENOID_PIN) -# define SOLENOID_PIN_WRITE_INACTIVE() writePinHigh(SOLENOID_PIN) -#else -# define SOLENOID_PIN_WRITE_ACTIVE() writePinHigh(SOLENOID_PIN) -# define SOLENOID_PIN_WRITE_INACTIVE() writePinLow(SOLENOID_PIN) -#endif - -void solenoid_buzz_on(void); +void solenoidbuzz_on(void); void solenoid_buzz_off(void); -void solenoid_set_buzz(int buzz); +void solenoid_set_buzz(uint8_t buzz); void solenoid_set_dwell(uint8_t dwell); -void solenoid_stop(void); -void solenoid_fire(void); +void solenoid_stop(uint8_t index); +void solenoid_fire(uint8_t index); +void solenoid_fire_handler(void); void solenoid_check(void); diff --git a/keyboards/handwired/onekey/blackpill_f411/config.h b/keyboards/handwired/onekey/blackpill_f411/config.h index 16e8f27924..3797217153 100644 --- a/keyboards/handwired/onekey/blackpill_f411/config.h +++ b/keyboards/handwired/onekey/blackpill_f411/config.h @@ -31,3 +31,7 @@ #define RGB_DI_PIN A1 #define ADC_PIN A0 + +#define SOLENOID_PIN B12 +#define SOLENOID_PINS { B12, B13, B14, B15 } +#define SOLENOID_PINS_ACTIVE_STATE { high, high, low } diff --git a/keyboards/handwired/onekey/keymaps/haptic/keymap.c b/keyboards/handwired/onekey/keymaps/haptic/keymap.c new file mode 100644 index 0000000000..e3b0093c18 --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/haptic/keymap.c @@ -0,0 +1,11 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_1x1(KC_A) +}; + +void haptic_enable(void); + +void keyboard_post_init_user(void) { + haptic_enable(); +} diff --git a/keyboards/handwired/onekey/keymaps/haptic/rules.mk b/keyboards/handwired/onekey/keymaps/haptic/rules.mk new file mode 100644 index 0000000000..802f7e5dde --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/haptic/rules.mk @@ -0,0 +1,2 @@ +HAPTIC_ENABLE = yes +HAPTIC_DRIVER = SOLENOID diff --git a/quantum/haptic.c b/quantum/haptic.c index 31d1114806..ad64fe2cc7 100644 --- a/quantum/haptic.c +++ b/quantum/haptic.c @@ -321,7 +321,7 @@ void haptic_play(void) { DRV_pulse(play_eff); #endif #ifdef SOLENOID_ENABLE - solenoid_fire(); + solenoid_fire_handler(); #endif } -- cgit v1.2.1