From 7d685956cc616a8d76aa7866f42bf569a9ca3fca Mon Sep 17 00:00:00 2001 From: Ryan Date: Mon, 31 Jan 2022 04:29:42 +1100 Subject: Rename `AdafruitBLE` to `BluefruitLE` (#16127) --- drivers/bluetooth/adafruit_ble.cpp | 699 ------------------------------------- drivers/bluetooth/adafruit_ble.h | 59 ---- drivers/bluetooth/bluefruit_le.cpp | 699 +++++++++++++++++++++++++++++++++++++ drivers/bluetooth/bluefruit_le.h | 59 ++++ drivers/bluetooth/outputselect.c | 8 +- 5 files changed, 762 insertions(+), 762 deletions(-) delete mode 100644 drivers/bluetooth/adafruit_ble.cpp delete mode 100644 drivers/bluetooth/adafruit_ble.h create mode 100644 drivers/bluetooth/bluefruit_le.cpp create mode 100644 drivers/bluetooth/bluefruit_le.h (limited to 'drivers/bluetooth') diff --git a/drivers/bluetooth/adafruit_ble.cpp b/drivers/bluetooth/adafruit_ble.cpp deleted file mode 100644 index 34a780e9a5..0000000000 --- a/drivers/bluetooth/adafruit_ble.cpp +++ /dev/null @@ -1,699 +0,0 @@ -#include "adafruit_ble.h" - -#include -#include -#include -#include "debug.h" -#include "timer.h" -#include "action_util.h" -#include "ringbuffer.hpp" -#include -#include "spi_master.h" -#include "wait.h" -#include "analog.h" -#include "progmem.h" - -// These are the pin assignments for the 32u4 boards. -// You may define them to something else in your config.h -// if yours is wired up differently. -#ifndef ADAFRUIT_BLE_RST_PIN -# define ADAFRUIT_BLE_RST_PIN D4 -#endif - -#ifndef ADAFRUIT_BLE_CS_PIN -# define ADAFRUIT_BLE_CS_PIN B4 -#endif - -#ifndef ADAFRUIT_BLE_IRQ_PIN -# define ADAFRUIT_BLE_IRQ_PIN E6 -#endif - -#ifndef ADAFRUIT_BLE_SCK_DIVISOR -# define ADAFRUIT_BLE_SCK_DIVISOR 2 // 4MHz SCK/8MHz CPU, calculated for Feather 32U4 BLE -#endif - -#define SAMPLE_BATTERY -#define ConnectionUpdateInterval 1000 /* milliseconds */ - -#ifndef BATTERY_LEVEL_PIN -# define BATTERY_LEVEL_PIN B5 -#endif - -static struct { - bool is_connected; - bool initialized; - bool configured; - -#define ProbedEvents 1 -#define UsingEvents 2 - bool event_flags; - -#ifdef SAMPLE_BATTERY - uint16_t last_battery_update; - uint32_t vbat; -#endif - uint16_t last_connection_update; -} state; - -// Commands are encoded using SDEP and sent via SPI -// https://github.com/adafruit/Adafruit_BluefruitLE_nRF51/blob/master/SDEP.md - -#define SdepMaxPayload 16 -struct sdep_msg { - uint8_t type; - uint8_t cmd_low; - uint8_t cmd_high; - struct __attribute__((packed)) { - uint8_t len : 7; - uint8_t more : 1; - }; - uint8_t payload[SdepMaxPayload]; -} __attribute__((packed)); - -// The recv latency is relatively high, so when we're hammering keys quickly, -// we want to avoid waiting for the responses in the matrix loop. We maintain -// a short queue for that. Since there is quite a lot of space overhead for -// the AT command representation wrapped up in SDEP, we queue the minimal -// information here. - -enum queue_type { - QTKeyReport, // 1-byte modifier + 6-byte key report - QTConsumer, // 16-bit key code -#ifdef MOUSE_ENABLE - QTMouseMove, // 4-byte mouse report -#endif -}; - -struct queue_item { - enum queue_type queue_type; - uint16_t added; - union __attribute__((packed)) { - struct __attribute__((packed)) { - uint8_t modifier; - uint8_t keys[6]; - } key; - - uint16_t consumer; - struct __attribute__((packed)) { - int8_t x, y, scroll, pan; - uint8_t buttons; - } mousemove; - }; -}; - -// Items that we wish to send -static RingBuffer send_buf; -// Pending response; while pending, we can't send any more requests. -// This records the time at which we sent the command for which we -// are expecting a response. -static RingBuffer resp_buf; - -static bool process_queue_item(struct queue_item *item, uint16_t timeout); - -enum sdep_type { - SdepCommand = 0x10, - SdepResponse = 0x20, - SdepAlert = 0x40, - SdepError = 0x80, - SdepSlaveNotReady = 0xFE, // Try again later - SdepSlaveOverflow = 0xFF, // You read more data than is available -}; - -enum ble_cmd { - BleInitialize = 0xBEEF, - BleAtWrapper = 0x0A00, - BleUartTx = 0x0A01, - BleUartRx = 0x0A02, -}; - -enum ble_system_event_bits { - BleSystemConnected = 0, - BleSystemDisconnected = 1, - BleSystemUartRx = 8, - BleSystemMidiRx = 10, -}; - -#define SdepTimeout 150 /* milliseconds */ -#define SdepShortTimeout 10 /* milliseconds */ -#define SdepBackOff 25 /* microseconds */ -#define BatteryUpdateInterval 10000 /* milliseconds */ - -static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout = SdepTimeout); -static bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose = false); - -// Send a single SDEP packet -static bool sdep_send_pkt(const struct sdep_msg *msg, uint16_t timeout) { - spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); - uint16_t timerStart = timer_read(); - bool success = false; - bool ready = false; - - do { - ready = spi_write(msg->type) != SdepSlaveNotReady; - if (ready) { - break; - } - - // Release it and let it initialize - spi_stop(); - wait_us(SdepBackOff); - spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); - } while (timer_elapsed(timerStart) < timeout); - - if (ready) { - // Slave is ready; send the rest of the packet - spi_transmit(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload)) + msg->len); - success = true; - } - - spi_stop(); - - return success; -} - -static inline void sdep_build_pkt(struct sdep_msg *msg, uint16_t command, const uint8_t *payload, uint8_t len, bool moredata) { - msg->type = SdepCommand; - msg->cmd_low = command & 0xFF; - msg->cmd_high = command >> 8; - msg->len = len; - msg->more = (moredata && len == SdepMaxPayload) ? 1 : 0; - - static_assert(sizeof(*msg) == 20, "msg is correctly packed"); - - memcpy(msg->payload, payload, len); -} - -// Read a single SDEP packet -static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) { - bool success = false; - uint16_t timerStart = timer_read(); - bool ready = false; - - do { - ready = readPin(ADAFRUIT_BLE_IRQ_PIN); - if (ready) { - break; - } - wait_us(1); - } while (timer_elapsed(timerStart) < timeout); - - if (ready) { - spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); - - do { - // Read the command type, waiting for the data to be ready - msg->type = spi_read(); - if (msg->type == SdepSlaveNotReady || msg->type == SdepSlaveOverflow) { - // Release it and let it initialize - spi_stop(); - wait_us(SdepBackOff); - spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); - continue; - } - - // Read the rest of the header - spi_receive(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload))); - - // and get the payload if there is any - if (msg->len <= SdepMaxPayload) { - spi_receive(msg->payload, msg->len); - } - success = true; - break; - } while (timer_elapsed(timerStart) < timeout); - - spi_stop(); - } - return success; -} - -static void resp_buf_read_one(bool greedy) { - uint16_t last_send; - if (!resp_buf.peek(last_send)) { - return; - } - - if (readPin(ADAFRUIT_BLE_IRQ_PIN)) { - struct sdep_msg msg; - - again: - if (sdep_recv_pkt(&msg, SdepTimeout)) { - if (!msg.more) { - // We got it; consume this entry - resp_buf.get(last_send); - dprintf("recv latency %dms\n", TIMER_DIFF_16(timer_read(), last_send)); - } - - if (greedy && resp_buf.peek(last_send) && readPin(ADAFRUIT_BLE_IRQ_PIN)) { - goto again; - } - } - - } else if (timer_elapsed(last_send) > SdepTimeout * 2) { - dprintf("waiting_for_result: timeout, resp_buf size %d\n", (int)resp_buf.size()); - - // Timed out: consume this entry - resp_buf.get(last_send); - } -} - -static void send_buf_send_one(uint16_t timeout = SdepTimeout) { - struct queue_item item; - - // Don't send anything more until we get an ACK - if (!resp_buf.empty()) { - return; - } - - if (!send_buf.peek(item)) { - return; - } - if (process_queue_item(&item, timeout)) { - // commit that peek - send_buf.get(item); - dprintf("send_buf_send_one: have %d remaining\n", (int)send_buf.size()); - } else { - dprint("failed to send, will retry\n"); - wait_ms(SdepTimeout); - resp_buf_read_one(true); - } -} - -static void resp_buf_wait(const char *cmd) { - bool didPrint = false; - while (!resp_buf.empty()) { - if (!didPrint) { - dprintf("wait on buf for %s\n", cmd); - didPrint = true; - } - resp_buf_read_one(true); - } -} - -static bool ble_init(void) { - state.initialized = false; - state.configured = false; - state.is_connected = false; - - setPinInput(ADAFRUIT_BLE_IRQ_PIN); - - spi_init(); - - // Perform a hardware reset - setPinOutput(ADAFRUIT_BLE_RST_PIN); - writePinHigh(ADAFRUIT_BLE_RST_PIN); - writePinLow(ADAFRUIT_BLE_RST_PIN); - wait_ms(10); - writePinHigh(ADAFRUIT_BLE_RST_PIN); - - wait_ms(1000); // Give it a second to initialize - - state.initialized = true; - return state.initialized; -} - -static inline uint8_t min(uint8_t a, uint8_t b) { return a < b ? a : b; } - -static bool read_response(char *resp, uint16_t resplen, bool verbose) { - char *dest = resp; - char *end = dest + resplen; - - while (true) { - struct sdep_msg msg; - - if (!sdep_recv_pkt(&msg, 2 * SdepTimeout)) { - dprint("sdep_recv_pkt failed\n"); - return false; - } - - if (msg.type != SdepResponse) { - *resp = 0; - return false; - } - - uint8_t len = min(msg.len, end - dest); - if (len > 0) { - memcpy(dest, msg.payload, len); - dest += len; - } - - if (!msg.more) { - // No more data is expected! - break; - } - } - - // Ensure the response is NUL terminated - *dest = 0; - - // "Parse" the result text; we want to snip off the trailing OK or ERROR line - // Rewind past the possible trailing CRLF so that we can strip it - --dest; - while (dest > resp && (dest[0] == '\n' || dest[0] == '\r')) { - *dest = 0; - --dest; - } - - // Look back for start of preceeding line - char *last_line = strrchr(resp, '\n'); - if (last_line) { - ++last_line; - } else { - last_line = resp; - } - - bool success = false; - static const char kOK[] PROGMEM = "OK"; - - success = !strcmp_P(last_line, kOK); - - if (verbose || !success) { - dprintf("result: %s\n", resp); - } - return success; -} - -static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout) { - const char * end = cmd + strlen(cmd); - struct sdep_msg msg; - - if (verbose) { - dprintf("ble send: %s\n", cmd); - } - - if (resp) { - // They want to decode the response, so we need to flush and wait - // for all pending I/O to finish before we start this one, so - // that we don't confuse the results - resp_buf_wait(cmd); - *resp = 0; - } - - // Fragment the command into a series of SDEP packets - while (end - cmd > SdepMaxPayload) { - sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, SdepMaxPayload, true); - if (!sdep_send_pkt(&msg, timeout)) { - return false; - } - cmd += SdepMaxPayload; - } - - sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, end - cmd, false); - if (!sdep_send_pkt(&msg, timeout)) { - return false; - } - - if (resp == NULL) { - uint16_t now = timer_read(); - while (!resp_buf.enqueue(now)) { - resp_buf_read_one(false); - } - uint16_t later = timer_read(); - if (TIMER_DIFF_16(later, now) > 0) { - dprintf("waited %dms for resp_buf\n", TIMER_DIFF_16(later, now)); - } - return true; - } - - return read_response(resp, resplen, verbose); -} - -bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) { - char *cmdbuf = (char *)alloca(strlen_P(cmd) + 1); - strcpy_P(cmdbuf, cmd); - return at_command(cmdbuf, resp, resplen, verbose); -} - -bool adafruit_ble_is_connected(void) { return state.is_connected; } - -bool adafruit_ble_enable_keyboard(void) { - char resbuf[128]; - - if (!state.initialized && !ble_init()) { - return false; - } - - state.configured = false; - - // Disable command echo - static const char kEcho[] PROGMEM = "ATE=0"; - // Make the advertised name match the keyboard - static const char kGapDevName[] PROGMEM = "AT+GAPDEVNAME=" STR(PRODUCT); - // Turn on keyboard support - static const char kHidEnOn[] PROGMEM = "AT+BLEHIDEN=1"; - - // Adjust intervals to improve latency. This causes the "central" - // system (computer/tablet) to poll us every 10-30 ms. We can't - // set a smaller value than 10ms, and 30ms seems to be the natural - // processing time on my macbook. Keeping it constrained to that - // feels reasonable to type to. - static const char kGapIntervals[] PROGMEM = "AT+GAPINTERVALS=10,30,,"; - - // Reset the device so that it picks up the above changes - static const char kATZ[] PROGMEM = "ATZ"; - - // Turn down the power level a bit - static const char kPower[] PROGMEM = "AT+BLEPOWERLEVEL=-12"; - static PGM_P const configure_commands[] PROGMEM = { - kEcho, kGapIntervals, kGapDevName, kHidEnOn, kPower, kATZ, - }; - - uint8_t i; - for (i = 0; i < sizeof(configure_commands) / sizeof(configure_commands[0]); ++i) { - PGM_P cmd; - memcpy_P(&cmd, configure_commands + i, sizeof(cmd)); - - if (!at_command_P(cmd, resbuf, sizeof(resbuf))) { - dprintf("failed BLE command: %S: %s\n", cmd, resbuf); - goto fail; - } - } - - state.configured = true; - - // Check connection status in a little while; allow the ATZ time - // to kick in. - state.last_connection_update = timer_read(); -fail: - return state.configured; -} - -static void set_connected(bool connected) { - if (connected != state.is_connected) { - if (connected) { - dprint("BLE connected\n"); - } else { - dprint("BLE disconnected\n"); - } - state.is_connected = connected; - - // TODO: if modifiers are down on the USB interface and - // we cut over to BLE or vice versa, they will remain stuck. - // This feels like a good point to do something like clearing - // the keyboard and/or generating a fake all keys up message. - // However, I've noticed that it takes a couple of seconds - // for macOS to to start recognizing key presses after BLE - // is in the connected state, so I worry that doing that - // here may not be good enough. - } -} - -void adafruit_ble_task(void) { - char resbuf[48]; - - if (!state.configured && !adafruit_ble_enable_keyboard()) { - return; - } - resp_buf_read_one(true); - send_buf_send_one(SdepShortTimeout); - - if (resp_buf.empty() && (state.event_flags & UsingEvents) && readPin(ADAFRUIT_BLE_IRQ_PIN)) { - // Must be an event update - if (at_command_P(PSTR("AT+EVENTSTATUS"), resbuf, sizeof(resbuf))) { - uint32_t mask = strtoul(resbuf, NULL, 16); - - if (mask & BleSystemConnected) { - set_connected(true); - } else if (mask & BleSystemDisconnected) { - set_connected(false); - } - } - } - - if (timer_elapsed(state.last_connection_update) > ConnectionUpdateInterval) { - bool shouldPoll = true; - if (!(state.event_flags & ProbedEvents)) { - // Request notifications about connection status changes. - // This only works in SPIFRIEND firmware > 0.6.7, which is why - // we check for this conditionally here. - // Note that at the time of writing, HID reports only work correctly - // with Apple products on firmware version 0.6.7! - // https://forums.adafruit.com/viewtopic.php?f=8&t=104052 - if (at_command_P(PSTR("AT+EVENTENABLE=0x1"), resbuf, sizeof(resbuf))) { - at_command_P(PSTR("AT+EVENTENABLE=0x2"), resbuf, sizeof(resbuf)); - state.event_flags |= UsingEvents; - } - state.event_flags |= ProbedEvents; - - // leave shouldPoll == true so that we check at least once - // before relying solely on events - } else { - shouldPoll = false; - } - - static const char kGetConn[] PROGMEM = "AT+GAPGETCONN"; - state.last_connection_update = timer_read(); - - if (at_command_P(kGetConn, resbuf, sizeof(resbuf))) { - set_connected(atoi(resbuf)); - } - } - -#ifdef SAMPLE_BATTERY - if (timer_elapsed(state.last_battery_update) > BatteryUpdateInterval && resp_buf.empty()) { - state.last_battery_update = timer_read(); - - state.vbat = analogReadPin(BATTERY_LEVEL_PIN); - } -#endif -} - -static bool process_queue_item(struct queue_item *item, uint16_t timeout) { - char cmdbuf[48]; - char fmtbuf[64]; - - // Arrange to re-check connection after keys have settled - state.last_connection_update = timer_read(); - -#if 1 - if (TIMER_DIFF_16(state.last_connection_update, item->added) > 0) { - dprintf("send latency %dms\n", TIMER_DIFF_16(state.last_connection_update, item->added)); - } -#endif - - switch (item->queue_type) { - case QTKeyReport: - strcpy_P(fmtbuf, PSTR("AT+BLEKEYBOARDCODE=%02x-00-%02x-%02x-%02x-%02x-%02x-%02x")); - snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->key.modifier, item->key.keys[0], item->key.keys[1], item->key.keys[2], item->key.keys[3], item->key.keys[4], item->key.keys[5]); - return at_command(cmdbuf, NULL, 0, true, timeout); - - case QTConsumer: - strcpy_P(fmtbuf, PSTR("AT+BLEHIDCONTROLKEY=0x%04x")); - snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->consumer); - return at_command(cmdbuf, NULL, 0, true, timeout); - -#ifdef MOUSE_ENABLE - case QTMouseMove: - strcpy_P(fmtbuf, PSTR("AT+BLEHIDMOUSEMOVE=%d,%d,%d,%d")); - snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->mousemove.x, item->mousemove.y, item->mousemove.scroll, item->mousemove.pan); - if (!at_command(cmdbuf, NULL, 0, true, timeout)) { - return false; - } - strcpy_P(cmdbuf, PSTR("AT+BLEHIDMOUSEBUTTON=")); - if (item->mousemove.buttons & MOUSE_BTN1) { - strcat(cmdbuf, "L"); - } - if (item->mousemove.buttons & MOUSE_BTN2) { - strcat(cmdbuf, "R"); - } - if (item->mousemove.buttons & MOUSE_BTN3) { - strcat(cmdbuf, "M"); - } - if (item->mousemove.buttons == 0) { - strcat(cmdbuf, "0"); - } - return at_command(cmdbuf, NULL, 0, true, timeout); -#endif - default: - return true; - } -} - -void adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys) { - struct queue_item item; - bool didWait = false; - - item.queue_type = QTKeyReport; - item.key.modifier = hid_modifier_mask; - item.added = timer_read(); - - while (nkeys >= 0) { - item.key.keys[0] = keys[0]; - item.key.keys[1] = nkeys >= 1 ? keys[1] : 0; - item.key.keys[2] = nkeys >= 2 ? keys[2] : 0; - item.key.keys[3] = nkeys >= 3 ? keys[3] : 0; - item.key.keys[4] = nkeys >= 4 ? keys[4] : 0; - item.key.keys[5] = nkeys >= 5 ? keys[5] : 0; - - if (!send_buf.enqueue(item)) { - if (!didWait) { - dprint("wait for buf space\n"); - didWait = true; - } - send_buf_send_one(); - continue; - } - - if (nkeys <= 6) { - return; - } - - nkeys -= 6; - keys += 6; - } -} - -void adafruit_ble_send_consumer_key(uint16_t usage) { - struct queue_item item; - - item.queue_type = QTConsumer; - item.consumer = usage; - - while (!send_buf.enqueue(item)) { - send_buf_send_one(); - } -} - -#ifdef MOUSE_ENABLE -void adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons) { - struct queue_item item; - - item.queue_type = QTMouseMove; - item.mousemove.x = x; - item.mousemove.y = y; - item.mousemove.scroll = scroll; - item.mousemove.pan = pan; - item.mousemove.buttons = buttons; - - while (!send_buf.enqueue(item)) { - send_buf_send_one(); - } -} -#endif - -uint32_t adafruit_ble_read_battery_voltage(void) { return state.vbat; } - -bool adafruit_ble_set_mode_leds(bool on) { - if (!state.configured) { - return false; - } - - // The "mode" led is the red blinky one - at_command_P(on ? PSTR("AT+HWMODELED=1") : PSTR("AT+HWMODELED=0"), NULL, 0); - - // Pin 19 is the blue "connected" LED; turn that off too. - // When turning LEDs back on, don't turn that LED on if we're - // not connected, as that would be confusing. - at_command_P(on && state.is_connected ? PSTR("AT+HWGPIO=19,1") : PSTR("AT+HWGPIO=19,0"), NULL, 0); - return true; -} - -// https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/ble-generic#at-plus-blepowerlevel -bool adafruit_ble_set_power_level(int8_t level) { - char cmd[46]; - if (!state.configured) { - return false; - } - snprintf(cmd, sizeof(cmd), "AT+BLEPOWERLEVEL=%d", level); - return at_command(cmd, NULL, 0, false); -} diff --git a/drivers/bluetooth/adafruit_ble.h b/drivers/bluetooth/adafruit_ble.h deleted file mode 100644 index b43e0771d9..0000000000 --- a/drivers/bluetooth/adafruit_ble.h +++ /dev/null @@ -1,59 +0,0 @@ -/* Bluetooth Low Energy Protocol for QMK. - * Author: Wez Furlong, 2016 - * Supports the Adafruit BLE board built around the nRF51822 chip. - */ - -#pragma once - -#include -#include -#include - -#include "config_common.h" - -#ifdef __cplusplus -extern "C" { -#endif - -/* Instruct the module to enable HID keyboard support and reset */ -extern bool adafruit_ble_enable_keyboard(void); - -/* Query to see if the BLE module is connected */ -extern bool adafruit_ble_query_is_connected(void); - -/* Returns true if we believe that the BLE module is connected. - * This uses our cached understanding that is maintained by - * calling ble_task() periodically. */ -extern bool adafruit_ble_is_connected(void); - -/* Call this periodically to process BLE-originated things */ -extern void adafruit_ble_task(void); - -/* Generates keypress events for a set of keys. - * The hid modifier mask specifies the state of the modifier keys for - * this set of keys. - * Also sends a key release indicator, so that the keys do not remain - * held down. */ -extern void adafruit_ble_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys); - -/* Send a consumer usage. - * (milliseconds) */ -extern void adafruit_ble_send_consumer_key(uint16_t usage); - -#ifdef MOUSE_ENABLE -/* Send a mouse/wheel movement report. - * The parameters are signed and indicate positive or negative direction - * change. */ -extern void adafruit_ble_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons); -#endif - -/* Compute battery voltage by reading an analog pin. - * Returns the integer number of millivolts */ -extern uint32_t adafruit_ble_read_battery_voltage(void); - -extern bool adafruit_ble_set_mode_leds(bool on); -extern bool adafruit_ble_set_power_level(int8_t level); - -#ifdef __cplusplus -} -#endif diff --git a/drivers/bluetooth/bluefruit_le.cpp b/drivers/bluetooth/bluefruit_le.cpp new file mode 100644 index 0000000000..86581a1a48 --- /dev/null +++ b/drivers/bluetooth/bluefruit_le.cpp @@ -0,0 +1,699 @@ +#include "bluefruit_le.h" + +#include +#include +#include +#include "debug.h" +#include "timer.h" +#include "action_util.h" +#include "ringbuffer.hpp" +#include +#include "spi_master.h" +#include "wait.h" +#include "analog.h" +#include "progmem.h" + +// These are the pin assignments for the 32u4 boards. +// You may define them to something else in your config.h +// if yours is wired up differently. +#ifndef BLUEFRUIT_LE_RST_PIN +# define BLUEFRUIT_LE_RST_PIN D4 +#endif + +#ifndef BLUEFRUIT_LE_CS_PIN +# define BLUEFRUIT_LE_CS_PIN B4 +#endif + +#ifndef BLUEFRUIT_LE_IRQ_PIN +# define BLUEFRUIT_LE_IRQ_PIN E6 +#endif + +#ifndef BLUEFRUIT_LE_SCK_DIVISOR +# define BLUEFRUIT_LE_SCK_DIVISOR 2 // 4MHz SCK/8MHz CPU, calculated for Feather 32U4 BLE +#endif + +#define SAMPLE_BATTERY +#define ConnectionUpdateInterval 1000 /* milliseconds */ + +#ifndef BATTERY_LEVEL_PIN +# define BATTERY_LEVEL_PIN B5 +#endif + +static struct { + bool is_connected; + bool initialized; + bool configured; + +#define ProbedEvents 1 +#define UsingEvents 2 + bool event_flags; + +#ifdef SAMPLE_BATTERY + uint16_t last_battery_update; + uint32_t vbat; +#endif + uint16_t last_connection_update; +} state; + +// Commands are encoded using SDEP and sent via SPI +// https://github.com/adafruit/Adafruit_BluefruitLE_nRF51/blob/master/SDEP.md + +#define SdepMaxPayload 16 +struct sdep_msg { + uint8_t type; + uint8_t cmd_low; + uint8_t cmd_high; + struct __attribute__((packed)) { + uint8_t len : 7; + uint8_t more : 1; + }; + uint8_t payload[SdepMaxPayload]; +} __attribute__((packed)); + +// The recv latency is relatively high, so when we're hammering keys quickly, +// we want to avoid waiting for the responses in the matrix loop. We maintain +// a short queue for that. Since there is quite a lot of space overhead for +// the AT command representation wrapped up in SDEP, we queue the minimal +// information here. + +enum queue_type { + QTKeyReport, // 1-byte modifier + 6-byte key report + QTConsumer, // 16-bit key code +#ifdef MOUSE_ENABLE + QTMouseMove, // 4-byte mouse report +#endif +}; + +struct queue_item { + enum queue_type queue_type; + uint16_t added; + union __attribute__((packed)) { + struct __attribute__((packed)) { + uint8_t modifier; + uint8_t keys[6]; + } key; + + uint16_t consumer; + struct __attribute__((packed)) { + int8_t x, y, scroll, pan; + uint8_t buttons; + } mousemove; + }; +}; + +// Items that we wish to send +static RingBuffer send_buf; +// Pending response; while pending, we can't send any more requests. +// This records the time at which we sent the command for which we +// are expecting a response. +static RingBuffer resp_buf; + +static bool process_queue_item(struct queue_item *item, uint16_t timeout); + +enum sdep_type { + SdepCommand = 0x10, + SdepResponse = 0x20, + SdepAlert = 0x40, + SdepError = 0x80, + SdepSlaveNotReady = 0xFE, // Try again later + SdepSlaveOverflow = 0xFF, // You read more data than is available +}; + +enum ble_cmd { + BleInitialize = 0xBEEF, + BleAtWrapper = 0x0A00, + BleUartTx = 0x0A01, + BleUartRx = 0x0A02, +}; + +enum ble_system_event_bits { + BleSystemConnected = 0, + BleSystemDisconnected = 1, + BleSystemUartRx = 8, + BleSystemMidiRx = 10, +}; + +#define SdepTimeout 150 /* milliseconds */ +#define SdepShortTimeout 10 /* milliseconds */ +#define SdepBackOff 25 /* microseconds */ +#define BatteryUpdateInterval 10000 /* milliseconds */ + +static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout = SdepTimeout); +static bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose = false); + +// Send a single SDEP packet +static bool sdep_send_pkt(const struct sdep_msg *msg, uint16_t timeout) { + spi_start(BLUEFRUIT_LE_CS_PIN, false, 0, BLUEFRUIT_LE_SCK_DIVISOR); + uint16_t timerStart = timer_read(); + bool success = false; + bool ready = false; + + do { + ready = spi_write(msg->type) != SdepSlaveNotReady; + if (ready) { + break; + } + + // Release it and let it initialize + spi_stop(); + wait_us(SdepBackOff); + spi_start(BLUEFRUIT_LE_CS_PIN, false, 0, BLUEFRUIT_LE_SCK_DIVISOR); + } while (timer_elapsed(timerStart) < timeout); + + if (ready) { + // Slave is ready; send the rest of the packet + spi_transmit(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload)) + msg->len); + success = true; + } + + spi_stop(); + + return success; +} + +static inline void sdep_build_pkt(struct sdep_msg *msg, uint16_t command, const uint8_t *payload, uint8_t len, bool moredata) { + msg->type = SdepCommand; + msg->cmd_low = command & 0xFF; + msg->cmd_high = command >> 8; + msg->len = len; + msg->more = (moredata && len == SdepMaxPayload) ? 1 : 0; + + static_assert(sizeof(*msg) == 20, "msg is correctly packed"); + + memcpy(msg->payload, payload, len); +} + +// Read a single SDEP packet +static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) { + bool success = false; + uint16_t timerStart = timer_read(); + bool ready = false; + + do { + ready = readPin(BLUEFRUIT_LE_IRQ_PIN); + if (ready) { + break; + } + wait_us(1); + } while (timer_elapsed(timerStart) < timeout); + + if (ready) { + spi_start(BLUEFRUIT_LE_CS_PIN, false, 0, BLUEFRUIT_LE_SCK_DIVISOR); + + do { + // Read the command type, waiting for the data to be ready + msg->type = spi_read(); + if (msg->type == SdepSlaveNotReady || msg->type == SdepSlaveOverflow) { + // Release it and let it initialize + spi_stop(); + wait_us(SdepBackOff); + spi_start(BLUEFRUIT_LE_CS_PIN, false, 0, BLUEFRUIT_LE_SCK_DIVISOR); + continue; + } + + // Read the rest of the header + spi_receive(&msg->cmd_low, sizeof(*msg) - (1 + sizeof(msg->payload))); + + // and get the payload if there is any + if (msg->len <= SdepMaxPayload) { + spi_receive(msg->payload, msg->len); + } + success = true; + break; + } while (timer_elapsed(timerStart) < timeout); + + spi_stop(); + } + return success; +} + +static void resp_buf_read_one(bool greedy) { + uint16_t last_send; + if (!resp_buf.peek(last_send)) { + return; + } + + if (readPin(BLUEFRUIT_LE_IRQ_PIN)) { + struct sdep_msg msg; + + again: + if (sdep_recv_pkt(&msg, SdepTimeout)) { + if (!msg.more) { + // We got it; consume this entry + resp_buf.get(last_send); + dprintf("recv latency %dms\n", TIMER_DIFF_16(timer_read(), last_send)); + } + + if (greedy && resp_buf.peek(last_send) && readPin(BLUEFRUIT_LE_IRQ_PIN)) { + goto again; + } + } + + } else if (timer_elapsed(last_send) > SdepTimeout * 2) { + dprintf("waiting_for_result: timeout, resp_buf size %d\n", (int)resp_buf.size()); + + // Timed out: consume this entry + resp_buf.get(last_send); + } +} + +static void send_buf_send_one(uint16_t timeout = SdepTimeout) { + struct queue_item item; + + // Don't send anything more until we get an ACK + if (!resp_buf.empty()) { + return; + } + + if (!send_buf.peek(item)) { + return; + } + if (process_queue_item(&item, timeout)) { + // commit that peek + send_buf.get(item); + dprintf("send_buf_send_one: have %d remaining\n", (int)send_buf.size()); + } else { + dprint("failed to send, will retry\n"); + wait_ms(SdepTimeout); + resp_buf_read_one(true); + } +} + +static void resp_buf_wait(const char *cmd) { + bool didPrint = false; + while (!resp_buf.empty()) { + if (!didPrint) { + dprintf("wait on buf for %s\n", cmd); + didPrint = true; + } + resp_buf_read_one(true); + } +} + +static bool ble_init(void) { + state.initialized = false; + state.configured = false; + state.is_connected = false; + + setPinInput(BLUEFRUIT_LE_IRQ_PIN); + + spi_init(); + + // Perform a hardware reset + setPinOutput(BLUEFRUIT_LE_RST_PIN); + writePinHigh(BLUEFRUIT_LE_RST_PIN); + writePinLow(BLUEFRUIT_LE_RST_PIN); + wait_ms(10); + writePinHigh(BLUEFRUIT_LE_RST_PIN); + + wait_ms(1000); // Give it a second to initialize + + state.initialized = true; + return state.initialized; +} + +static inline uint8_t min(uint8_t a, uint8_t b) { return a < b ? a : b; } + +static bool read_response(char *resp, uint16_t resplen, bool verbose) { + char *dest = resp; + char *end = dest + resplen; + + while (true) { + struct sdep_msg msg; + + if (!sdep_recv_pkt(&msg, 2 * SdepTimeout)) { + dprint("sdep_recv_pkt failed\n"); + return false; + } + + if (msg.type != SdepResponse) { + *resp = 0; + return false; + } + + uint8_t len = min(msg.len, end - dest); + if (len > 0) { + memcpy(dest, msg.payload, len); + dest += len; + } + + if (!msg.more) { + // No more data is expected! + break; + } + } + + // Ensure the response is NUL terminated + *dest = 0; + + // "Parse" the result text; we want to snip off the trailing OK or ERROR line + // Rewind past the possible trailing CRLF so that we can strip it + --dest; + while (dest > resp && (dest[0] == '\n' || dest[0] == '\r')) { + *dest = 0; + --dest; + } + + // Look back for start of preceeding line + char *last_line = strrchr(resp, '\n'); + if (last_line) { + ++last_line; + } else { + last_line = resp; + } + + bool success = false; + static const char kOK[] PROGMEM = "OK"; + + success = !strcmp_P(last_line, kOK); + + if (verbose || !success) { + dprintf("result: %s\n", resp); + } + return success; +} + +static bool at_command(const char *cmd, char *resp, uint16_t resplen, bool verbose, uint16_t timeout) { + const char * end = cmd + strlen(cmd); + struct sdep_msg msg; + + if (verbose) { + dprintf("ble send: %s\n", cmd); + } + + if (resp) { + // They want to decode the response, so we need to flush and wait + // for all pending I/O to finish before we start this one, so + // that we don't confuse the results + resp_buf_wait(cmd); + *resp = 0; + } + + // Fragment the command into a series of SDEP packets + while (end - cmd > SdepMaxPayload) { + sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, SdepMaxPayload, true); + if (!sdep_send_pkt(&msg, timeout)) { + return false; + } + cmd += SdepMaxPayload; + } + + sdep_build_pkt(&msg, BleAtWrapper, (uint8_t *)cmd, end - cmd, false); + if (!sdep_send_pkt(&msg, timeout)) { + return false; + } + + if (resp == NULL) { + uint16_t now = timer_read(); + while (!resp_buf.enqueue(now)) { + resp_buf_read_one(false); + } + uint16_t later = timer_read(); + if (TIMER_DIFF_16(later, now) > 0) { + dprintf("waited %dms for resp_buf\n", TIMER_DIFF_16(later, now)); + } + return true; + } + + return read_response(resp, resplen, verbose); +} + +bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) { + char *cmdbuf = (char *)alloca(strlen_P(cmd) + 1); + strcpy_P(cmdbuf, cmd); + return at_command(cmdbuf, resp, resplen, verbose); +} + +bool bluefruit_le_is_connected(void) { return state.is_connected; } + +bool bluefruit_le_enable_keyboard(void) { + char resbuf[128]; + + if (!state.initialized && !ble_init()) { + return false; + } + + state.configured = false; + + // Disable command echo + static const char kEcho[] PROGMEM = "ATE=0"; + // Make the advertised name match the keyboard + static const char kGapDevName[] PROGMEM = "AT+GAPDEVNAME=" STR(PRODUCT); + // Turn on keyboard support + static const char kHidEnOn[] PROGMEM = "AT+BLEHIDEN=1"; + + // Adjust intervals to improve latency. This causes the "central" + // system (computer/tablet) to poll us every 10-30 ms. We can't + // set a smaller value than 10ms, and 30ms seems to be the natural + // processing time on my macbook. Keeping it constrained to that + // feels reasonable to type to. + static const char kGapIntervals[] PROGMEM = "AT+GAPINTERVALS=10,30,,"; + + // Reset the device so that it picks up the above changes + static const char kATZ[] PROGMEM = "ATZ"; + + // Turn down the power level a bit + static const char kPower[] PROGMEM = "AT+BLEPOWERLEVEL=-12"; + static PGM_P const configure_commands[] PROGMEM = { + kEcho, kGapIntervals, kGapDevName, kHidEnOn, kPower, kATZ, + }; + + uint8_t i; + for (i = 0; i < sizeof(configure_commands) / sizeof(configure_commands[0]); ++i) { + PGM_P cmd; + memcpy_P(&cmd, configure_commands + i, sizeof(cmd)); + + if (!at_command_P(cmd, resbuf, sizeof(resbuf))) { + dprintf("failed BLE command: %S: %s\n", cmd, resbuf); + goto fail; + } + } + + state.configured = true; + + // Check connection status in a little while; allow the ATZ time + // to kick in. + state.last_connection_update = timer_read(); +fail: + return state.configured; +} + +static void set_connected(bool connected) { + if (connected != state.is_connected) { + if (connected) { + dprint("BLE connected\n"); + } else { + dprint("BLE disconnected\n"); + } + state.is_connected = connected; + + // TODO: if modifiers are down on the USB interface and + // we cut over to BLE or vice versa, they will remain stuck. + // This feels like a good point to do something like clearing + // the keyboard and/or generating a fake all keys up message. + // However, I've noticed that it takes a couple of seconds + // for macOS to to start recognizing key presses after BLE + // is in the connected state, so I worry that doing that + // here may not be good enough. + } +} + +void bluefruit_le_task(void) { + char resbuf[48]; + + if (!state.configured && !bluefruit_le_enable_keyboard()) { + return; + } + resp_buf_read_one(true); + send_buf_send_one(SdepShortTimeout); + + if (resp_buf.empty() && (state.event_flags & UsingEvents) && readPin(BLUEFRUIT_LE_IRQ_PIN)) { + // Must be an event update + if (at_command_P(PSTR("AT+EVENTSTATUS"), resbuf, sizeof(resbuf))) { + uint32_t mask = strtoul(resbuf, NULL, 16); + + if (mask & BleSystemConnected) { + set_connected(true); + } else if (mask & BleSystemDisconnected) { + set_connected(false); + } + } + } + + if (timer_elapsed(state.last_connection_update) > ConnectionUpdateInterval) { + bool shouldPoll = true; + if (!(state.event_flags & ProbedEvents)) { + // Request notifications about connection status changes. + // This only works in SPIFRIEND firmware > 0.6.7, which is why + // we check for this conditionally here. + // Note that at the time of writing, HID reports only work correctly + // with Apple products on firmware version 0.6.7! + // https://forums.adafruit.com/viewtopic.php?f=8&t=104052 + if (at_command_P(PSTR("AT+EVENTENABLE=0x1"), resbuf, sizeof(resbuf))) { + at_command_P(PSTR("AT+EVENTENABLE=0x2"), resbuf, sizeof(resbuf)); + state.event_flags |= UsingEvents; + } + state.event_flags |= ProbedEvents; + + // leave shouldPoll == true so that we check at least once + // before relying solely on events + } else { + shouldPoll = false; + } + + static const char kGetConn[] PROGMEM = "AT+GAPGETCONN"; + state.last_connection_update = timer_read(); + + if (at_command_P(kGetConn, resbuf, sizeof(resbuf))) { + set_connected(atoi(resbuf)); + } + } + +#ifdef SAMPLE_BATTERY + if (timer_elapsed(state.last_battery_update) > BatteryUpdateInterval && resp_buf.empty()) { + state.last_battery_update = timer_read(); + + state.vbat = analogReadPin(BATTERY_LEVEL_PIN); + } +#endif +} + +static bool process_queue_item(struct queue_item *item, uint16_t timeout) { + char cmdbuf[48]; + char fmtbuf[64]; + + // Arrange to re-check connection after keys have settled + state.last_connection_update = timer_read(); + +#if 1 + if (TIMER_DIFF_16(state.last_connection_update, item->added) > 0) { + dprintf("send latency %dms\n", TIMER_DIFF_16(state.last_connection_update, item->added)); + } +#endif + + switch (item->queue_type) { + case QTKeyReport: + strcpy_P(fmtbuf, PSTR("AT+BLEKEYBOARDCODE=%02x-00-%02x-%02x-%02x-%02x-%02x-%02x")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->key.modifier, item->key.keys[0], item->key.keys[1], item->key.keys[2], item->key.keys[3], item->key.keys[4], item->key.keys[5]); + return at_command(cmdbuf, NULL, 0, true, timeout); + + case QTConsumer: + strcpy_P(fmtbuf, PSTR("AT+BLEHIDCONTROLKEY=0x%04x")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->consumer); + return at_command(cmdbuf, NULL, 0, true, timeout); + +#ifdef MOUSE_ENABLE + case QTMouseMove: + strcpy_P(fmtbuf, PSTR("AT+BLEHIDMOUSEMOVE=%d,%d,%d,%d")); + snprintf(cmdbuf, sizeof(cmdbuf), fmtbuf, item->mousemove.x, item->mousemove.y, item->mousemove.scroll, item->mousemove.pan); + if (!at_command(cmdbuf, NULL, 0, true, timeout)) { + return false; + } + strcpy_P(cmdbuf, PSTR("AT+BLEHIDMOUSEBUTTON=")); + if (item->mousemove.buttons & MOUSE_BTN1) { + strcat(cmdbuf, "L"); + } + if (item->mousemove.buttons & MOUSE_BTN2) { + strcat(cmdbuf, "R"); + } + if (item->mousemove.buttons & MOUSE_BTN3) { + strcat(cmdbuf, "M"); + } + if (item->mousemove.buttons == 0) { + strcat(cmdbuf, "0"); + } + return at_command(cmdbuf, NULL, 0, true, timeout); +#endif + default: + return true; + } +} + +void bluefruit_le_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys) { + struct queue_item item; + bool didWait = false; + + item.queue_type = QTKeyReport; + item.key.modifier = hid_modifier_mask; + item.added = timer_read(); + + while (nkeys >= 0) { + item.key.keys[0] = keys[0]; + item.key.keys[1] = nkeys >= 1 ? keys[1] : 0; + item.key.keys[2] = nkeys >= 2 ? keys[2] : 0; + item.key.keys[3] = nkeys >= 3 ? keys[3] : 0; + item.key.keys[4] = nkeys >= 4 ? keys[4] : 0; + item.key.keys[5] = nkeys >= 5 ? keys[5] : 0; + + if (!send_buf.enqueue(item)) { + if (!didWait) { + dprint("wait for buf space\n"); + didWait = true; + } + send_buf_send_one(); + continue; + } + + if (nkeys <= 6) { + return; + } + + nkeys -= 6; + keys += 6; + } +} + +void bluefruit_le_send_consumer_key(uint16_t usage) { + struct queue_item item; + + item.queue_type = QTConsumer; + item.consumer = usage; + + while (!send_buf.enqueue(item)) { + send_buf_send_one(); + } +} + +#ifdef MOUSE_ENABLE +void bluefruit_le_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons) { + struct queue_item item; + + item.queue_type = QTMouseMove; + item.mousemove.x = x; + item.mousemove.y = y; + item.mousemove.scroll = scroll; + item.mousemove.pan = pan; + item.mousemove.buttons = buttons; + + while (!send_buf.enqueue(item)) { + send_buf_send_one(); + } +} +#endif + +uint32_t bluefruit_le_read_battery_voltage(void) { return state.vbat; } + +bool bluefruit_le_set_mode_leds(bool on) { + if (!state.configured) { + return false; + } + + // The "mode" led is the red blinky one + at_command_P(on ? PSTR("AT+HWMODELED=1") : PSTR("AT+HWMODELED=0"), NULL, 0); + + // Pin 19 is the blue "connected" LED; turn that off too. + // When turning LEDs back on, don't turn that LED on if we're + // not connected, as that would be confusing. + at_command_P(on && state.is_connected ? PSTR("AT+HWGPIO=19,1") : PSTR("AT+HWGPIO=19,0"), NULL, 0); + return true; +} + +// https://learn.adafruit.com/adafruit-feather-32u4-bluefruit-le/ble-generic#at-plus-blepowerlevel +bool bluefruit_le_set_power_level(int8_t level) { + char cmd[46]; + if (!state.configured) { + return false; + } + snprintf(cmd, sizeof(cmd), "AT+BLEPOWERLEVEL=%d", level); + return at_command(cmd, NULL, 0, false); +} diff --git a/drivers/bluetooth/bluefruit_le.h b/drivers/bluetooth/bluefruit_le.h new file mode 100644 index 0000000000..de301c6167 --- /dev/null +++ b/drivers/bluetooth/bluefruit_le.h @@ -0,0 +1,59 @@ +/* Bluetooth Low Energy Protocol for QMK. + * Author: Wez Furlong, 2016 + * Supports the Adafruit BLE board built around the nRF51822 chip. + */ + +#pragma once + +#include +#include +#include + +#include "config_common.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* Instruct the module to enable HID keyboard support and reset */ +extern bool bluefruit_le_enable_keyboard(void); + +/* Query to see if the BLE module is connected */ +extern bool bluefruit_le_query_is_connected(void); + +/* Returns true if we believe that the BLE module is connected. + * This uses our cached understanding that is maintained by + * calling ble_task() periodically. */ +extern bool bluefruit_le_is_connected(void); + +/* Call this periodically to process BLE-originated things */ +extern void bluefruit_le_task(void); + +/* Generates keypress events for a set of keys. + * The hid modifier mask specifies the state of the modifier keys for + * this set of keys. + * Also sends a key release indicator, so that the keys do not remain + * held down. */ +extern void bluefruit_le_send_keys(uint8_t hid_modifier_mask, uint8_t *keys, uint8_t nkeys); + +/* Send a consumer usage. + * (milliseconds) */ +extern void bluefruit_le_send_consumer_key(uint16_t usage); + +#ifdef MOUSE_ENABLE +/* Send a mouse/wheel movement report. + * The parameters are signed and indicate positive or negative direction + * change. */ +extern void bluefruit_le_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, uint8_t buttons); +#endif + +/* Compute battery voltage by reading an analog pin. + * Returns the integer number of millivolts */ +extern uint32_t bluefruit_le_read_battery_voltage(void); + +extern bool bluefruit_le_set_mode_leds(bool on); +extern bool bluefruit_le_set_power_level(int8_t level); + +#ifdef __cplusplus +} +#endif diff --git a/drivers/bluetooth/outputselect.c b/drivers/bluetooth/outputselect.c index f758c65280..cdd2e64cfd 100644 --- a/drivers/bluetooth/outputselect.c +++ b/drivers/bluetooth/outputselect.c @@ -18,8 +18,8 @@ along with this program. If not, see . # include "lufa.h" #endif -#ifdef MODULE_ADAFRUIT_BLE -# include "adafruit_ble.h" +#ifdef BLUETOOTH_BLUEFRUIT_LE +# include "bluefruit_le.h" #endif uint8_t desired_output = OUTPUT_DEFAULT; @@ -54,8 +54,8 @@ uint8_t auto_detect_output(void) { return OUTPUT_USB; } -#ifdef MODULE_ADAFRUIT_BLE - if (adafruit_ble_is_connected()) { +#ifdef BLUETOOTH_BLUEFRUIT_LE + if (bluefruit_le_is_connected()) { return OUTPUT_BLUETOOTH; } #endif -- cgit v1.2.1