From 206a995ccd53b0843e72da606abebe06f39c9c28 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 31 Jul 2021 14:31:09 +0100 Subject: Move some led drivers to common folder (#13749) * Move some led drivers to common folder --- drivers/led/aw20216.c | 141 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 141 insertions(+) create mode 100644 drivers/led/aw20216.c (limited to 'drivers/led/aw20216.c') diff --git a/drivers/led/aw20216.c b/drivers/led/aw20216.c new file mode 100644 index 0000000000..c608c0ab44 --- /dev/null +++ b/drivers/led/aw20216.c @@ -0,0 +1,141 @@ +/* Copyright 2021 Jasper Chan + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "aw20216.h" +#include "spi_master.h" + +/* The AW20216 appears to be somewhat similar to the IS31FL743, although quite + * a few things are different, such as the command byte format and page ordering. + * The LED addresses start from 0x00 instead of 0x01. + */ +#define AWINIC_ID 0b1010 << 4 + +#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers +#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control +#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control +#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice? +#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control? + +#define AW_WRITE 0 +#define AW_READ 1 + +#define AW_REG_CONFIGURATION 0x00 // PG0 +#define AW_REG_GLOBALCURRENT 0x01 // PG0 + +// Default value of AW_REG_CONFIGURATION +// D7:D4 = 1011, SWSEL (SW1~SW12 active) +// D3 = 0?, reserved (apparently this should be 1 but it doesn't seem to matter) +// D2:D1 = 00, OSDE (open/short detection enable) +// D0 = 0, CHIPEN (write 1 to enable LEDs when hardware enable pulled high) +#define AW_CONFIG_DEFAULT 0b10110000 +#define AW_CHIPEN 1 + +#define AW_PWM_REGISTER_COUNT 216 + +#ifndef AW_SCALING_MAX +# define AW_SCALING_MAX 150 +#endif + +#ifndef AW_GLOBAL_CURRENT_MAX +# define AW_GLOBAL_CURRENT_MAX 150 +#endif + +#ifndef AW_SPI_DIVISOR +# define AW_SPI_DIVISOR 4 +#endif + +uint8_t g_pwm_buffer[DRIVER_COUNT][AW_PWM_REGISTER_COUNT]; +bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false}; + +bool AW20216_write(pin_t cs_pin, uint8_t page, uint8_t reg, uint8_t* data, uint8_t len) { + static uint8_t s_spi_transfer_buffer[2] = {0}; + + if (!spi_start(cs_pin, false, 0, AW_SPI_DIVISOR)) { + spi_stop(); + return false; + } + + s_spi_transfer_buffer[0] = (AWINIC_ID | page | AW_WRITE); + s_spi_transfer_buffer[1] = reg; + + if (spi_transmit(s_spi_transfer_buffer, 2) != SPI_STATUS_SUCCESS) { + spi_stop(); + return false; + } + + if (spi_transmit(data, len) != SPI_STATUS_SUCCESS) { + spi_stop(); + return false; + } + + spi_stop(); + return true; +} + +static inline bool AW20216_write_register(pin_t cs_pin, uint8_t page, uint8_t reg, uint8_t value) { + // Little wrapper so callers need not care about sending a buffer + return AW20216_write(cs_pin, page, reg, &value, 1); +} + +static void AW20216_init_scaling(pin_t cs_pin) { + // Set constant current to the max, control brightness with PWM + for (uint8_t i = 0; i < AW_PWM_REGISTER_COUNT; i++) { + AW20216_write_register(cs_pin, AW_PAGE_SCALING, i, AW_SCALING_MAX); + } +} + +static inline void AW20216_init_current_limit(pin_t cs_pin) { + // Push config + AW20216_write_register(cs_pin, AW_PAGE_FUNCTION, AW_REG_GLOBALCURRENT, AW_GLOBAL_CURRENT_MAX); +} + +static inline void AW20216_soft_enable(pin_t cs_pin) { + // Push config + AW20216_write_register(cs_pin, AW_PAGE_FUNCTION, AW_REG_CONFIGURATION, AW_CONFIG_DEFAULT | AW_CHIPEN); +} + +void AW20216_init(pin_t cs_pin, pin_t en_pin) { + setPinOutput(en_pin); + writePinHigh(en_pin); + + // Drivers should start with all scaling and PWM registers as off + AW20216_init_current_limit(cs_pin); + AW20216_init_scaling(cs_pin); + + AW20216_soft_enable(cs_pin); +} + +void AW20216_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + aw_led led = g_aw_leds[index]; + + g_pwm_buffer[led.driver][led.r] = red; + g_pwm_buffer[led.driver][led.g] = green; + g_pwm_buffer[led.driver][led.b] = blue; + g_pwm_buffer_update_required[led.driver] = true; +} + +void AW20216_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { + for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) { + AW20216_set_color(i, red, green, blue); + } +} + +void AW20216_update_pwm_buffers(pin_t cs_pin, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + AW20216_write(cs_pin, AW_PAGE_PWM, 0, g_pwm_buffer[index], AW_PWM_REGISTER_COUNT); + } + g_pwm_buffer_update_required[index] = false; +} -- cgit v1.2.1