From 63646e8906e062d1c1de3925cba70c4e3426a855 Mon Sep 17 00:00:00 2001 From: QMK Bot Date: Sat, 12 Feb 2022 10:29:31 -0800 Subject: Format code according to conventions (#16322) --- drivers/led/apa102.c | 10 ++++++---- drivers/led/aw20216.c | 14 +++++++------- drivers/led/issi/is31fl3731-simple.c | 6 +++--- drivers/led/issi/is31fl3731.c | 6 +++--- drivers/led/issi/is31fl3733-simple.c | 20 ++++++++++---------- drivers/led/issi/is31fl3733-simple.h | 14 +++++++------- drivers/led/issi/is31fl3733.c | 20 ++++++++++---------- drivers/led/issi/is31fl3733.h | 14 +++++++------- drivers/led/issi/is31fl3736.c | 20 ++++++++++---------- drivers/led/issi/is31fl3736.h | 16 ++++++++-------- drivers/led/issi/is31fl3737.c | 20 ++++++++++---------- drivers/led/issi/is31fl3737.h | 16 ++++++++-------- drivers/led/issi/is31fl3741.c | 20 ++++++++++---------- drivers/led/issi/is31fl3741.h | 16 ++++++++-------- 14 files changed, 107 insertions(+), 105 deletions(-) (limited to 'drivers/led') diff --git a/drivers/led/apa102.c b/drivers/led/apa102.c index 00e7eb4505..f291948975 100644 --- a/drivers/led/apa102.c +++ b/drivers/led/apa102.c @@ -20,15 +20,15 @@ #ifndef APA102_NOPS # if defined(__AVR__) -# define APA102_NOPS 0 // AVR at 16 MHz already spends 62.5 ns per clock, so no extra delay is needed +# define APA102_NOPS 0 // AVR at 16 MHz already spends 62.5 ns per clock, so no extra delay is needed # elif defined(PROTOCOL_CHIBIOS) # include "hal.h" # if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) || defined(GD32VF103) -# define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns +# define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns # else # error("APA102_NOPS configuration required") -# define APA102_NOPS 0 // this just pleases the compile so the above error is easier to spot +# define APA102_NOPS 0 // this just pleases the compile so the above error is easier to spot # endif # endif #endif @@ -72,7 +72,9 @@ void apa102_setleds(LED_TYPE *start_led, uint16_t num_leds) { } // Overwrite the default rgblight_call_driver to use apa102 driver -void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) { apa102_setleds(start_led, num_leds); } +void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) { + apa102_setleds(start_led, num_leds); +} void static apa102_init(void) { setPinOutput(RGB_DI_PIN); diff --git a/drivers/led/aw20216.c b/drivers/led/aw20216.c index 2c7ff8f088..59389cdcd6 100644 --- a/drivers/led/aw20216.c +++ b/drivers/led/aw20216.c @@ -23,17 +23,17 @@ */ #define AWINIC_ID 0b1010 << 4 -#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers -#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control -#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control -#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice? -#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control? +#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers +#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control +#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control +#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice? +#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control? #define AW_WRITE 0 #define AW_READ 1 -#define AW_REG_CONFIGURATION 0x00 // PG0 -#define AW_REG_GLOBALCURRENT 0x01 // PG0 +#define AW_REG_CONFIGURATION 0x00 // PG0 +#define AW_REG_GLOBALCURRENT 0x01 // PG0 // Default value of AW_REG_CONFIGURATION // D7:D4 = 1011, SWSEL (SW1~SW12 active) diff --git a/drivers/led/issi/is31fl3731-simple.c b/drivers/led/issi/is31fl3731-simple.c index f51e2e38af..3abe9ea337 100644 --- a/drivers/led/issi/is31fl3731-simple.c +++ b/drivers/led/issi/is31fl3731-simple.c @@ -42,13 +42,13 @@ #define ISSI_REG_PICTUREFRAME 0x01 // Not defined in the datasheet -- See AN for IC -#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 #define ISSI_COMMANDREGISTER 0xFD -#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 @@ -148,7 +148,7 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); -#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); #endif diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c index e6190a6b90..9c6c29f081 100644 --- a/drivers/led/issi/is31fl3731.c +++ b/drivers/led/issi/is31fl3731.c @@ -41,13 +41,13 @@ #define ISSI_REG_PICTUREFRAME 0x01 // Not defined in the datasheet -- See AN for IC -#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 #define ISSI_COMMANDREGISTER 0xFD -#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 @@ -136,7 +136,7 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); -#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); #endif diff --git a/drivers/led/issi/is31fl3733-simple.c b/drivers/led/issi/is31fl3733-simple.c index 777895bf89..af006f756d 100644 --- a/drivers/led/issi/is31fl3733-simple.c +++ b/drivers/led/issi/is31fl3733-simple.c @@ -39,16 +39,16 @@ #define ISSI_INTERRUPTMASKREGISTER 0xF0 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1 -#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 -#define ISSI_PAGE_PWM 0x01 // PG1 -#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 -#define ISSI_PAGE_FUNCTION 0x03 // PG3 +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 -#define ISSI_REG_CONFIGURATION 0x00 // PG3 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 -#define ISSI_REG_RESET 0x11 // PG3 -#define ISSI_REG_SWPULLUP 0x0F // PG3 -#define ISSI_REG_CSPULLUP 0x10 // PG3 +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 @@ -59,7 +59,7 @@ #endif #ifndef ISSI_PWM_FREQUENCY -# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only #endif #ifndef ISSI_SWPULLUP diff --git a/drivers/led/issi/is31fl3733-simple.h b/drivers/led/issi/is31fl3733-simple.h index f071db5e40..f5253e3101 100644 --- a/drivers/led/issi/is31fl3733-simple.h +++ b/drivers/led/issi/is31fl3733-simple.h @@ -47,13 +47,13 @@ void IS31FL3733_set_led_control_register(uint8_t index, bool value); void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL -#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time -#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time -#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time -#define PUR_16KR 0x06 // 16k Ohm resistor on all the time -#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL +#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time +#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time +#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time +#define PUR_16KR 0x06 // 16k Ohm resistor on all the time +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL #define A_1 0x00 #define A_2 0x01 diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c index 696491d070..a2fdaa90fa 100644 --- a/drivers/led/issi/is31fl3733.c +++ b/drivers/led/issi/is31fl3733.c @@ -38,16 +38,16 @@ #define ISSI_INTERRUPTMASKREGISTER 0xF0 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1 -#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 -#define ISSI_PAGE_PWM 0x01 // PG1 -#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 -#define ISSI_PAGE_FUNCTION 0x03 // PG3 +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 -#define ISSI_REG_CONFIGURATION 0x00 // PG3 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 -#define ISSI_REG_RESET 0x11 // PG3 -#define ISSI_REG_SWPULLUP 0x0F // PG3 -#define ISSI_REG_CSPULLUP 0x10 // PG3 +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 @@ -58,7 +58,7 @@ #endif #ifndef ISSI_PWM_FREQUENCY -# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only #endif #ifndef ISSI_SWPULLUP diff --git a/drivers/led/issi/is31fl3733.h b/drivers/led/issi/is31fl3733.h index c5d62fed85..7653dd17c0 100644 --- a/drivers/led/issi/is31fl3733.h +++ b/drivers/led/issi/is31fl3733.h @@ -48,13 +48,13 @@ void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bo void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL -#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time -#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time -#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time -#define PUR_16KR 0x06 // 16k Ohm resistor on all the time -#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL +#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time +#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time +#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time +#define PUR_16KR 0x06 // 16k Ohm resistor on all the time +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL #define A_1 0x00 #define A_2 0x01 diff --git a/drivers/led/issi/is31fl3736.c b/drivers/led/issi/is31fl3736.c index c9a871118d..7752a3f6cb 100644 --- a/drivers/led/issi/is31fl3736.c +++ b/drivers/led/issi/is31fl3736.c @@ -36,16 +36,16 @@ #define ISSI_INTERRUPTMASKREGISTER 0xF0 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1 -#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 -#define ISSI_PAGE_PWM 0x01 // PG1 -#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 -#define ISSI_PAGE_FUNCTION 0x03 // PG3 - -#define ISSI_REG_CONFIGURATION 0x00 // PG3 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 -#define ISSI_REG_RESET 0x11 // PG3 -#define ISSI_REG_SWPULLUP 0x0F // PG3 -#define ISSI_REG_CSPULLUP 0x10 // PG3 +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 + +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 diff --git a/drivers/led/issi/is31fl3736.h b/drivers/led/issi/is31fl3736.h index 9fbe1cc577..f126034615 100644 --- a/drivers/led/issi/is31fl3736.h +++ b/drivers/led/issi/is31fl3736.h @@ -61,14 +61,14 @@ void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled); void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2); void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x01 // 0.5k Ohm resistor -#define PUR_1KR 0x02 // 1.0k Ohm resistor -#define PUR_2KR 0x03 // 2.0k Ohm resistor -#define PUR_4KR 0x04 // 4.0k Ohm resistor -#define PUR_8KR 0x05 // 8.0k Ohm resistor -#define PUR_16KR 0x06 // 16k Ohm resistor -#define PUR_32KR 0x07 // 32k Ohm resistor +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor +#define PUR_1KR 0x02 // 1.0k Ohm resistor +#define PUR_2KR 0x03 // 2.0k Ohm resistor +#define PUR_4KR 0x04 // 4.0k Ohm resistor +#define PUR_8KR 0x05 // 8.0k Ohm resistor +#define PUR_16KR 0x06 // 16k Ohm resistor +#define PUR_32KR 0x07 // 32k Ohm resistor #define A_1 0x00 #define A_2 0x02 diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c index 0722e18869..9f2a13de45 100644 --- a/drivers/led/issi/is31fl3737.c +++ b/drivers/led/issi/is31fl3737.c @@ -38,16 +38,16 @@ #define ISSI_INTERRUPTMASKREGISTER 0xF0 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1 -#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 -#define ISSI_PAGE_PWM 0x01 // PG1 -#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 -#define ISSI_PAGE_FUNCTION 0x03 // PG3 - -#define ISSI_REG_CONFIGURATION 0x00 // PG3 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 -#define ISSI_REG_RESET 0x11 // PG3 -#define ISSI_REG_SWPULLUP 0x0F // PG3 -#define ISSI_REG_CSPULLUP 0x10 // PG3 +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 + +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 diff --git a/drivers/led/issi/is31fl3737.h b/drivers/led/issi/is31fl3737.h index 31b1a22267..ddb70a9df5 100644 --- a/drivers/led/issi/is31fl3737.h +++ b/drivers/led/issi/is31fl3737.h @@ -48,14 +48,14 @@ void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bo void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2); void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL -#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL -#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL -#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL -#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL -#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL -#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL +#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL +#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL +#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL +#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL +#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL #define A_1 0x00 #define A_2 0x01 diff --git a/drivers/led/issi/is31fl3741.c b/drivers/led/issi/is31fl3741.c index 8d347a5e60..393b0179b5 100644 --- a/drivers/led/issi/is31fl3741.c +++ b/drivers/led/issi/is31fl3741.c @@ -42,16 +42,16 @@ #define ISSI_INTERRUPTSTATUSREGISTER 0xF1 #define ISSI_IDREGISTER 0xFC -#define ISSI_PAGE_PWM0 0x00 // PG0 -#define ISSI_PAGE_PWM1 0x01 // PG1 -#define ISSI_PAGE_SCALING_0 0x02 // PG2 -#define ISSI_PAGE_SCALING_1 0x03 // PG3 -#define ISSI_PAGE_FUNCTION 0x04 // PG4 - -#define ISSI_REG_CONFIGURATION 0x00 // PG4 -#define ISSI_REG_GLOBALCURRENT 0x01 // PG4 -#define ISSI_REG_PULLDOWNUP 0x02 // PG4 -#define ISSI_REG_RESET 0x3F // PG4 +#define ISSI_PAGE_PWM0 0x00 // PG0 +#define ISSI_PAGE_PWM1 0x01 // PG1 +#define ISSI_PAGE_SCALING_0 0x02 // PG2 +#define ISSI_PAGE_SCALING_1 0x03 // PG3 +#define ISSI_PAGE_FUNCTION 0x04 // PG4 + +#define ISSI_REG_CONFIGURATION 0x00 // PG4 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG4 +#define ISSI_REG_PULLDOWNUP 0x02 // PG4 +#define ISSI_REG_RESET 0x3F // PG4 #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 diff --git a/drivers/led/issi/is31fl3741.h b/drivers/led/issi/is31fl3741.h index 8154f8be70..3bdb23bd2d 100644 --- a/drivers/led/issi/is31fl3741.h +++ b/drivers/led/issi/is31fl3741.h @@ -51,14 +51,14 @@ void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue); -#define PUR_0R 0x00 // No PUR resistor -#define PUR_05KR 0x01 // 0.5k Ohm resistor -#define PUR_1KR 0x02 // 1.0k Ohm resistor -#define PUR_2KR 0x03 // 2.0k Ohm resistor -#define PUR_4KR 0x04 // 4.0k Ohm resistor -#define PUR_8KR 0x05 // 8.0k Ohm resistor -#define PUR_16KR 0x06 // 16k Ohm resistor -#define PUR_32KR 0x07 // 32k Ohm resistor +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor +#define PUR_1KR 0x02 // 1.0k Ohm resistor +#define PUR_2KR 0x03 // 2.0k Ohm resistor +#define PUR_4KR 0x04 // 4.0k Ohm resistor +#define PUR_8KR 0x05 // 8.0k Ohm resistor +#define PUR_16KR 0x06 // 16k Ohm resistor +#define PUR_32KR 0x07 // 32k Ohm resistor #define CS1_SW1 0x00 #define CS2_SW1 0x01 -- cgit v1.2.1