From 2c5d3ac76f0ef3c72aa0416aef8b775864b50eb1 Mon Sep 17 00:00:00 2001
From: tmk <nobody@nowhere>
Date: Sat, 30 Jun 2012 13:26:09 +0900
Subject: Add Makefile.lufa to keyboard/hhkb and hbkb.

---
 keyboard/hbkb/Makefile | 57 +-------------------------------------------------
 1 file changed, 1 insertion(+), 56 deletions(-)
 mode change 100644 => 120000 keyboard/hbkb/Makefile

(limited to 'keyboard/hbkb/Makefile')

diff --git a/keyboard/hbkb/Makefile b/keyboard/hbkb/Makefile
deleted file mode 100644
index 26be322e01..0000000000
--- a/keyboard/hbkb/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-# Target file name (without extension).
-TARGET = hbk
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =	main.c \
-	keymap.c \
-	matrix.c \
-	led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-#   comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes	# Mouse keys
-#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-#NKRO_ENABLE = yes	# USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
-	      /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
-	      /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
-
-
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hbkb/Makefile b/keyboard/hbkb/Makefile
new file mode 120000
index 0000000000..f00d036da3
--- /dev/null
+++ b/keyboard/hbkb/Makefile
@@ -0,0 +1 @@
+Makefile.lufa
\ No newline at end of file
-- 
cgit v1.2.1