From f2e1609801a2588a459673347ffab50662660c20 Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Sun, 18 Jun 2017 12:33:14 -0400
Subject: remove hardware files, move arrow pad

---
 keyboards/handwired/arrow_pad/readme.md | 133 ++++++++++++++++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644 keyboards/handwired/arrow_pad/readme.md

(limited to 'keyboards/handwired/arrow_pad/readme.md')

diff --git a/keyboards/handwired/arrow_pad/readme.md b/keyboards/handwired/arrow_pad/readme.md
new file mode 100644
index 0000000000..d0d172272e
--- /dev/null
+++ b/keyboards/handwired/arrow_pad/readme.md
@@ -0,0 +1,133 @@
+arrow_pad keyboard firmware
+======================
+
+## Keyboard Info
+
+The ArrowPad is a wired conversion that can be made to any stand-alone keypad. It uses two main layers - a standard numpad, and a more advanced arrow cluster navigator.
+
+The first 24-key ArrowPad was handwired, but the PCB was wired as listed below.
+
+```
+<Chip Ref Des> pin <Pin #>
+<Keycap Name> (Silkscreen Name if different) - <Switch Pin #>
+
+
+Note:
+U2 pin 2 is the Num Lock LED and is  active low.
+
+U2 pin 1
+Clear (Num Lock) - 1
+Enter - 2
+Esc (ESC) - 2
+
+
+U2 pin 3
+- - 1
+
+U2 pin 4
+7 - 2
+8 - 2
+9 - 2
+
+U2 pin 5
+* - 2
+Delete (BACK SPACE) -  2
+
+U2 pin 6
+1 - 2
+0 - 2
+. - 2
+, - 2
+
+U2 pin 7
+4 - 2
+5 - 2
+6 - 2
+
+U2 pin 8
+Tab - 2
+= (/) - 2
+
+U2 pin 13
+Delete (BACK SPACE) -  1
+9 - 1
+6 - 1
+3 - 1
+. - 1
+
+U2 pin 14
+Tab - 1
+8 - 1
+5 - 1
+2 - 1
+0 - 1
+
+U2 pin 15
+Esc (ESC) - 1
+= (/) - 1
+/ (*) - 1
+7 - 1
+4 - 1
+1 - 1
++ - 1
+
+U2 pin 16
+Enter - 1
+* (<--) - 1
+, - 1
+
+U2 pin 17
+Fn (#NAME?) - 1
+- - 2
+Clear (Num Lock) - 2
+
+U2 pin 18
+Fn (#NAME?) - 2
+* (<--) - 2
++ - 2
+3 - 2
+2 - 2
+```
+
+More info can be found on [GeekHack](https://geekhack.org/index.php?topic=73632.msg1802497#msg1802497)
+
+The second ArrowPad was a conversion from a 21-key Genovation keypad. It used a 2 row x 11 column matrix.
+
+```
+#define KEYMAP( \
+    KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
+    KM_NUM, KM_FSL, KM_AST, KM_MIN, \
+    KM___7, KM___8, KM___9, ___PLS, \
+    KM___4, KM___5, KM___6, KM_PLS, \
+    KM___1, KM___2, KM___3, ___ENT, \
+    KM___0, _____0, KM_DOT, KM_ENT  \
+) { \
+    { KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \
+    { KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO,  KM___0, KM_DOT, }, \
+}
+```
+
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/arrow_pad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+To build with the default keymap, simply run `make default`.
+
+### Other Keymaps
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
+```
+$ make [default|pad_21|pad_24|<name>]
+```
+
+Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
-- 
cgit v1.2.1