From 6809f154c9b8a405444c1a32839e7e3687ddb8e2 Mon Sep 17 00:00:00 2001 From: Cao Thai Duong <57068549+KD-MM2@users.noreply.github.com> Date: Mon, 26 Sep 2022 14:42:04 +0900 Subject: [Keyboard] Add Handwired 87 keys (#17682) Co-authored-by: Drashna Jaelre Co-authored-by: Joel Challis --- keyboards/handwired/hwpm87/readme.md | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 keyboards/handwired/hwpm87/readme.md (limited to 'keyboards/handwired/hwpm87/readme.md') diff --git a/keyboards/handwired/hwpm87/readme.md b/keyboards/handwired/hwpm87/readme.md new file mode 100644 index 0000000000..f0f4b3db2e --- /dev/null +++ b/keyboards/handwired/hwpm87/readme.md @@ -0,0 +1,35 @@ +# Handwired 87 keys + +![hwpm87](https://i.imgur.com/DLqdtAWh.jpeg) + +Repaired from 87 keys keyboard using a Pro Micro + +* Keyboard Maintainer: [KD-MM2](https://github.com/KD-MM2) +* Hardware Supported: Pro Micro(need to solder more pins) or any board with ATMega32u4 +* Hardware Availability: N/A (private board, might open source) + +First, if you have Pro Micro + Checkout these image for more: ![Pin map](https://i.imgur.com/SvZ9rGQ.jpeg) ![Usabled Pins](https://i.imgur.com/Nr4cWP5.jpeg) + Keymaps/Handwiring: ![Handwiring](https://i.imgur.com/G1izHd6.png) +If you have 25 GPIOs board, there is nothing to do. + +Second, if you are using a Capslock LED, define LED pin in: [config.h#34](https://github.com/KD-MM2/qmk_firmware/blob/hwpm87/keyboards/hwpm87/config.h#L34), +and check the LED_PIN_ON_STATE if you get reversed led state: [config.h#35](https://github.com/KD-MM2/qmk_firmware/blob/hwpm87/keyboards/hwpm87/config.h#L35) + +Make example for this keyboard (after setting up your build environment): + + make handwired/hwpm87:default + +Flashing example for this keyboard: + + make handwired/hwpm87:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Plug cable, open QMK Toolbox and short RST pin and GND pin, then you will see it in flashmode +* **Keycode in layout**: Press the key mapped to `RESET` if it is available -- cgit v1.2.1