From b114b273737291ffec5a042ce58bf6d738e967d7 Mon Sep 17 00:00:00 2001 From: peepeetee <43021794+peepeetee@users.noreply.github.com> Date: Wed, 9 Feb 2022 13:49:53 +0800 Subject: [Keyboard] Idobao ID80 V3 (#15912) Co-authored-by: Drashna Jaelre --- keyboards/idobao/id80/v3/readme.md | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 keyboards/idobao/id80/v3/readme.md (limited to 'keyboards/idobao/id80/v3/readme.md') diff --git a/keyboards/idobao/id80/v3/readme.md b/keyboards/idobao/id80/v3/readme.md new file mode 100644 index 0000000000..dc6c67b4f4 --- /dev/null +++ b/keyboards/idobao/id80/v3/readme.md @@ -0,0 +1,27 @@ +# ID80v3 + +![ID80v3](https://i.imgur.com/PGvZfQj.jpg) + +A 75% hotswap in-switch RGB keyboard with an encoder. + +* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee) +* Hardware Supported: ID80v3 +* Hardware Availability: Not avaliable yet + +Make example for this keyboard (after setting up your build environment): + + make idobao/id80/v3:default + +Flashing example for this keyboard: + + make idobao/id80/v3:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available -- cgit v1.2.1