From 28e92536d46298229593c12406b503bf3bcbbede Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20A=2E=20Volpato?= Date: Tue, 7 Dec 2021 11:48:12 -0300 Subject: Iron180 LED fix (#15411) --- keyboards/iron180/readme.md | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) (limited to 'keyboards/iron180/readme.md') diff --git a/keyboards/iron180/readme.md b/keyboards/iron180/readme.md index 5f340c4251..1dbffae1d4 100644 --- a/keyboards/iron180/readme.md +++ b/keyboards/iron180/readme.md @@ -1,4 +1,6 @@ -# Iron180 QMK folder +# Iron180 QMK firmware folder + +![iron180](https://i.imgur.com/zHcZoxa.png) ## Introduction @@ -6,13 +8,26 @@ This is the QMK Firmware repository for the Iron180 PCB, a keyboard designed by The Iron180 PCB is a F13 TKL PCB with ALPS switches support. It also supports in-switch single-color LEDs and a multi-layout design for default or 7U bottom row, ISO layout, split backspace and right shift. -As of November 2020, the only way to obtain an Iron180 was through the [Group Buy](https://geekhack.org/index.php?topic=109513) which is already over and all spots were filled. +As of november 2021, the Group Buy of Iron180 is already over and extras were not sold yet. See the [GB page](https://geekhack.org/index.php?topic=109513) for more information. + +## How to flash + +### Enter bootloader + +The DFU state in the bootloader can be accessed in 3 ways: -## How to compile +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard with the key pressed; +* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds; +* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESCAPE key in layer 1 of the default layout); -After setting up your build environment, you can compile the Iron180 default keymap by using: +## Compile firmware and flash + +To build the default layout for this keyboard (after setting up your build environment), use: make iron180:default -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). +Then, after accessing the DFU state, use a tool like `dfu-util` or the QMK Toolbox to download that firmware into your PCB. To directly compile-and-flash the PCB after it is put into a DFU state, use + make iron180:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.1