From 35b329052cc5e80eac58cde6816fa09982c1f9d5 Mon Sep 17 00:00:00 2001 From: "J.Flanagan" Date: Wed, 25 Nov 2020 12:48:12 -0600 Subject: [Keyboard] Add Viktus Styrka (#10982) * Initial Styrka Commit Initial commit of basic working firmware. - has basic 6.25u spacebar and fullsize backspace support in default keymap - has basic 6.25u spacebar and split backspace support in split_bs keymap - beginning work for via keymap (not complete) * Viktus Styrka Update 1 First edit update for Viktus Styrka - Corrected LAYOUT macros - Updated keymaps - Updated info.json to match LAYOUT macros - Added and updated VIA keymap - Added and updated ALL keymap - Removed unused features from config - Added more detailed board info to main readme * Update info.json Update info.json - missing end } * Update to files in initial commit As requested, changes made to: - styrka.c - rules.mk - split_bs/keymap.c - all/keymap.c - info.json - config.h * Update keyboards/viktus/styrka/rules.mk Co-authored-by: Ryan Co-authored-by: Ryan --- keyboards/viktus/styrka/readme.md | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 keyboards/viktus/styrka/readme.md (limited to 'keyboards/viktus/styrka/readme.md') diff --git a/keyboards/viktus/styrka/readme.md b/keyboards/viktus/styrka/readme.md new file mode 100644 index 0000000000..3d211e8c44 --- /dev/null +++ b/keyboards/viktus/styrka/readme.md @@ -0,0 +1,23 @@ +# Viktus Styrka + +![Styrka](https://i.imgur.com/) + +The Viktus Styrka is a 65% + left macro block created in a collaboration of OneCreativeMind and BlindAssassin111 (Viktus owner). All design done by BlindAssassin111. The board supports ANSI and ISO modifiers as well as split backspace and stepped/non-stepped caps lock. + +The PCB is an arm powered board utilizing the STM32F072CBT6 mcu. The PCB is designed to work with the universal daughterboard and a 4in (~100mm) 4 pin JST SR cable with reversed pinout (pin 1 of both connectors is the same wire etc.). + +On the PCB is a single button for a reset for flashing. As well, there is a [Segger J-Link 6-pin Needle Adapter](https://www.segger.com/products/debug-probes/j-link/accessories/adapters/6-pin-needle-adapter/) footprint for reflashing the mcu as a backup in case of a bootloader issue. + +* Keyboard Maintainer: [jrfhoutx](https://github.com/jrfhoutx), blindassassin111 +* Hardware Supported: Styrka +* Hardware Availability: + +Make example for this keyboard (after setting up your build environment): + + make viktus/styrka:default + +Flashing example for this keyboard: + + make viktus/styrka:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.1