From 6a8c0a6468f4e4ce48a59152418a226d0f027497 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sun, 24 Nov 2019 04:42:20 +0000 Subject: [Keyboard] Update ATmega32A readme files to match template (#7462) * Update atmega32a readme files to match template * Update atmega32a readme files to match template - fixes * Apply suggestions from code review --- keyboards/ares/readme.md | 41 +++---------- keyboards/bfake/readme.md | 43 +++---------- keyboards/coseyfannitutti/discipline/readme.md | 10 ++- keyboards/donutcables/budget96/readme.md | 42 +++---------- keyboards/eve/meteor/readme.md | 40 ++---------- keyboards/exclusive/e6v2/le_bmc/readme.md | 41 +++---------- keyboards/exclusive/e6v2/oe_bmc/readme.md | 41 +++---------- keyboards/exent/readme.md | 8 +-- keyboards/facew/readme.md | 40 +++--------- keyboards/ft/mars80/readme.md | 35 ++--------- keyboards/gray_studio/hb85/readme.md | 37 ++---------- keyboards/jc65/v32a/readme.md | 25 +++----- keyboards/jj40/README.md | 79 +++--------------------- keyboards/jj4x4/README.md | 68 +++------------------ keyboards/jj50/README.md | 84 +++----------------------- keyboards/kbdfans/kbdpad/mk1/readme.md | 40 ++---------- keyboards/leeku/finger65/readme.md | 14 ++--- keyboards/mechmini/v1/README.md | 80 +++--------------------- keyboards/mehkee96/readme.md | 37 ++---------- keyboards/mt40/readme.md | 21 ++++--- keyboards/panc60/readme.md | 43 +++---------- keyboards/pearl/readme.md | 43 +++---------- keyboards/percent/canoe/readme.md | 37 ++---------- keyboards/percent/skog/README.md | 42 +++---------- keyboards/percent/skog_lite/readme.md | 43 +++---------- keyboards/singa/readme.md | 44 +++----------- keyboards/tgr/alice/readme.md | 41 +++---------- keyboards/tgr/jane/readme.md | 42 +++---------- keyboards/unikorn/readme.md | 58 +++++------------- keyboards/winkeyless/bface/README.md | 41 +++---------- keyboards/winkeyless/bmini/readme.md | 38 +++--------- keyboards/winkeyless/bminiex/readme.md | 10 ++- keyboards/ymd75/README.md | 84 +++----------------------- keyboards/ymd96/readme.md | 66 ++++---------------- keyboards/ymdk/bface/README.md | 46 ++------------ keyboards/ymdk_np21/README.md | 16 +++-- 36 files changed, 275 insertions(+), 1245 deletions(-) (limited to 'keyboards') diff --git a/keyboards/ares/readme.md b/keyboards/ares/readme.md index 338113a13a..376cee437f 100644 --- a/keyboards/ares/readme.md +++ b/keyboards/ares/readme.md @@ -1,42 +1,17 @@ -lSJ Ares -======== +# lSJ Ares -Keyboard Maintainer: QMK Community -Hardware Supported: LSJ Ares PCB -Hardware Availability: https://geekhack.org/index.php?topic=93146.0 +* Keyboard Maintainer: QMK Community +* Hardware Supported: LSJ Ares PCB +* Hardware Availability: Make example for this keyboard (after setting up your build environment): make ares:default -Flashing +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make ares:default:flash -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset by holding the left control key and plugging the cable in. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. +**Reset Key**: Hold down the *left control* key while plugging in the keyboard. -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python - brew install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bfake/readme.md b/keyboards/bfake/readme.md index 1ccc25f2dc..df319cd7c5 100644 --- a/keyboards/bfake/readme.md +++ b/keyboards/bfake/readme.md @@ -1,44 +1,17 @@ -B.fake -======== +# B.fake -A 60% keyboard with RGB. The B.fake pcb is a copy of the B.face PCB sold by [winkeyless](https://winkeyless.kr/). However, the switch matrix is actually the same as the [FaceW](https://github.com/qmk/qmk_firmware/tree/master/keyboards/facew), a ps2avr PCB sold on [mechanicalkeyboards.com](https://mechanicalkeyboards.com/). +A 60% keyboard with RGB. The B.fake pcb is a copy of the B.face PCB sold by [winkeyless](https://winkeyless.kr/). However, the switch matrix is actually the same as the [FaceW](https://github.com/qmk/qmk_firmware/tree/master/keyboards/facew), a ps2avr PCB sold on [mechanicalkeyboards.com](https://mechanicalkeyboards.com/). -Keyboard Maintainer: QMK Community -Hardware Supported: B.fake PCB -Hardware Availability: https://www.aliexpress.com/store/product/bface-60-RGB-underground-copy-pcb-from-china-gh60-pcb-Customize-keyboard-PCB/2230037_32731084597.html +* Keyboard Maintainer: QMK Community +* Hardware Supported: B.fake PCB +* Hardware Availability: Make example for this keyboard (after setting up your build environment): make bfake:default -Flashing +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make bfake:default:flash -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python - brew install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/coseyfannitutti/discipline/readme.md b/keyboards/coseyfannitutti/discipline/readme.md index d11f1724f6..d850151d15 100644 --- a/keyboards/coseyfannitutti/discipline/readme.md +++ b/keyboards/coseyfannitutti/discipline/readme.md @@ -4,12 +4,16 @@ A 65% keyboard that can be assembled with only through hole components, including usb type-c -Keyboard Maintainer: [coseyfannitutti](https://github.com/coseyfannitutti) -Hardware Supported: DISCIPLINE, atmega32a -Hardware Availability: [cftkb.com](http://www.cftkb.com), [GitHub](https://github.com/coseyfannitutti/discipline) +* Keyboard Maintainer: [coseyfannitutti](https://github.com/coseyfannitutti) +* Hardware Supported: DISCIPLINE, atmega32a +* Hardware Availability: [cftkb.com](http://www.cftkb.com), [GitHub](https://github.com/coseyfannitutti/discipline) Make example for this keyboard (after setting up your build environment): make coseyfannitutti/discipline:default +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make coseyfannitutti/discipline:default:flash + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/donutcables/budget96/readme.md b/keyboards/donutcables/budget96/readme.md index c83040360a..11c49b9834 100644 --- a/keyboards/donutcables/budget96/readme.md +++ b/keyboards/donutcables/budget96/readme.md @@ -2,44 +2,18 @@ 96 key atmega32a keyboard. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: Budget96 PCB -Hardware Availability: [DonutCables](https://donutcables.com/) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: Budget96 PCB +* Hardware Availability: [DonutCables](https://donutcables.com/) Make example for this keyboard (after setting up your build environment): make donutcables/budget96:default -Flashing - -**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make donutcables/budget96:default:flash + +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *left control* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/eve/meteor/readme.md b/keyboards/eve/meteor/readme.md index 8e933c09d1..28884156ea 100644 --- a/keyboards/eve/meteor/readme.md +++ b/keyboards/eve/meteor/readme.md @@ -2,50 +2,20 @@ 60% PCB with Function Row - -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: EVE Meteor -Hardware Availability: [zFrontier](https://en.zfrontier.com/products/eve-meteor) - +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: EVE Meteor +* Hardware Availability: [zFrontier](https://en.zfrontier.com/products/eve-meteor) Make example for this keyboard (after setting up your build environment): make eve/meteor:default -Flashing +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make eve/meteor:default:flash **Reset Key:** Short the two holes labeled `FW_JP` underneath the PCB, beside the Tab key while plugging in the keyboard. Do not confuse this with the LED holes of the switch in the `Tab` position. `FW_JP` is not reachable from the top as the plate blocks access to it. -It is recommended to program a `RESET` key in your keymap. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - - See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/exclusive/e6v2/le_bmc/readme.md b/keyboards/exclusive/e6v2/le_bmc/readme.md index 4dc8e6ef51..561560a3e3 100644 --- a/keyboards/exclusive/e6v2/le_bmc/readme.md +++ b/keyboards/exclusive/e6v2/le_bmc/readme.md @@ -2,43 +2,18 @@ These docs are for the BMC version of the E6-V2 PCB sold during Round 2 which has an atmega32a microcontroller. Please do not flash this `.hex` file on your atmega32u4 equipped E6-V2 or your E6V2 BMC from Round 1. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: ps2avrgb E6-V2 with atmega32a microcontroller -Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: ps2avrgb E6-V2 with atmega32a microcontroller +* Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0) Make example for this keyboard (after setting up your build environment): make exclusive/e6v2/le_bmc:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make exclusive/e6v2/le_bmc:default:flash + +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *left control* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/exclusive/e6v2/oe_bmc/readme.md b/keyboards/exclusive/e6v2/oe_bmc/readme.md index a386abf6c0..cd6da0ff0b 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/readme.md +++ b/keyboards/exclusive/e6v2/oe_bmc/readme.md @@ -2,43 +2,18 @@ These docs are for the BMC version of the E6-V2 PCB sold during Round 1 which has an atmega32a microcontroller. Please do not flash this `.hex` file on your atmega32u4 equipped E6-V2 or your E6V2 BMC from Round 2. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: ps2avrgb E6-V2 with atmega32a microcontroller -Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: ps2avrgb E6-V2 with atmega32a microcontroller +* Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0) Make example for this keyboard (after setting up your build environment): make exclusive/e6v2/oe_bmc:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make exclusive/e6v2/oe_bmc:default:flash + +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *left control* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/exent/readme.md b/keyboards/exent/readme.md index 08807eda55..a98eff5f03 100644 --- a/keyboards/exent/readme.md +++ b/keyboards/exent/readme.md @@ -2,9 +2,9 @@ 65% custom keyboard with large bezels. -Keyboard Maintainer: [mechmerlin](https://github.com/mechmerlin) -Hardware Supported: Exent PCB -Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=87213.0) +* Keyboard Maintainer: [mechmerlin](https://github.com/mechmerlin) +* Hardware Supported: Exent PCB +* Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=87213.0) Make example for this keyboard (after setting up your build environment): @@ -14,6 +14,6 @@ Flashing example for this keyboard ([after setting up the bootloadHID flashing e make exent:default:flash -**Reset Key**: Hold down the key located at `k0d`, commonly programmed as Backspace while plugging in the keyboard. +**Reset Key**: Hold down the key located at `k0d`, commonly programmed as *Backspace* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/facew/readme.md b/keyboards/facew/readme.md index b749d18d29..a852a4f46d 100644 --- a/keyboards/facew/readme.md +++ b/keyboards/facew/readme.md @@ -4,44 +4,18 @@ A 60% no frills keyboard. The FaceW is a special run of the WKL B.Face sourced from Sprit that doesn't have underglow RGB LEDs but does have in switch LEDs. Also unlike the B.Face, it is based on ps2avru instead of ps2avrGB. It is designed and manufactured in Korea. -Keyboard Maintainer: [MechMerlin](www.github.com/mechmerlin) -Hardware Supported: FaceW Sprit Edition PCB -Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1352 +* Keyboard Maintainer: [MechMerlin](www.github.com/mechmerlin) +* Hardware Supported: FaceW Sprit Edition PCB +* Hardware Availability: Make example for this keyboard (after setting up your build environment): make facew:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** To put the FaceW into reset, hold `q` (`K01`) while plugging in. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + make facew:default:flash + +**Reset Key**: Hold down the key located at *K01*, commonly programmed as *q* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ft/mars80/readme.md b/keyboards/ft/mars80/readme.md index 9622751334..3d108300bb 100644 --- a/keyboards/ft/mars80/readme.md +++ b/keyboards/ft/mars80/readme.md @@ -2,43 +2,18 @@ TKL Keyboard with in switch backlight and RGB Underglow. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: Mars 8.0 PCB -Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=93723.0) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: Mars 8.0 PCB +* Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=93723.0) Make example for this keyboard (after setting up your build environment): make ft/mars80:default -Flashing +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make ft/mars80:default:flash **Reset Key:** Hold down the key located at `K00`, commonly programmed as `Pause/Break` while plugging in the keyboard. -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/gray_studio/hb85/readme.md b/keyboards/gray_studio/hb85/readme.md index c0c2fdf371..7e39f327c1 100644 --- a/keyboards/gray_studio/hb85/readme.md +++ b/keyboards/gray_studio/hb85/readme.md @@ -4,45 +4,18 @@ A Sony HitBit MSX Computer inspired Keyboard. -Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury) -Hardware Supported: Gray Studio HB85 -Hardware Availability: [Group buy](https://en.zfrontier.com/products/gray-hb85) finished +* Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury) +* Hardware Supported: Gray Studio HB85 +* Hardware Availability: [Group buy](https://en.zfrontier.com/products/gray-hb85) finished Make example for this keyboard (after setting up your build environment): make gray_studio/hb85:default -Flashing +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make gray_studio/hb85:default:flash **Reset Key:** Hold down the key located at `K00`, commonly programmed as F3 while plugging in the keyboard. -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - -**Please Note:** You will need to use the `EEP_RST` keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work. - See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jc65/v32a/readme.md b/keyboards/jc65/v32a/readme.md index 5027f83613..8a139ca664 100644 --- a/keyboards/jc65/v32a/readme.md +++ b/keyboards/jc65/v32a/readme.md @@ -1,32 +1,25 @@ -JC65 ps2avrGB -======= +# JC65 ![JC65](https://i.imgur.com/9cJ9UbX.jpg) A 65% keyboard with RGB -Keyboard Maintainer: [Jason Barnachea](https://github.com/nautxx) - -Hardware Supported: JC65 rev.ps2avrgb - -Hardware Availability: [keyclack.com](https://keyclack.com/) - The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy, and were also available choices for the 65% acrylic case group buy. -Please note that there have been issues with QMK and PS2AVRGB boards. Random shutdowns and overheating have been reported. As of now, the cause has not been discovered. - These docs are for the PS2AVRGB version of the PCB. More info on qmk.fm +* Keyboard Maintainer: [Jason Barnachea](https://github.com/nautxx) +* Hardware Supported: JC65 rev.ps2avrgb +* Hardware Availability: [keyclack.com](https://keyclack.com/) + Make example for this keyboard (after setting up your build environment): make jc65/v32a:default - -Flash example for this keyboard: - bootloadHID -r jc65_v32a_default.hex +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -Flashing on Windows can be accomplished by downloading [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash) + make jc65/v32a:default:flash -To put the PS2AVRGB board into reset, hold down the left control key while plugging in the keyboard. +**Reset Key**: Hold down the key commonly programmed as *left control* while plugging in the keyboard. -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. \ No newline at end of file +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jj40/README.md b/keyboards/jj40/README.md index 7d3612554b..5f4d2c8a99 100644 --- a/keyboards/jj40/README.md +++ b/keyboards/jj40/README.md @@ -4,81 +4,18 @@ A compact 40% (12x4) ortholinear keyboard kit made and KPRepublic on AliExpress. -Keyboard Maintainer: [QMK Community](https://github.com/qmk) -Hardware Supported: Atmega32A -Hardware Availability: [AliExpress](https://www.aliexpress.com/store/product/jj40-Custom-Mechanical-Keyboard-40-PCB-programmed-40-planck-layouts-bface-firmware-gh40/3034003_32828781103.html) +* Keyboard Maintainer: [QMK Community](https://github.com/qmk) +* Hardware Supported: Atmega32A +* Hardware Availability: [AliExpress](https://www.aliexpress.com/store/product/jj40-Custom-Mechanical-Keyboard-40-PCB-programmed-40-planck-layouts-bface-firmware-gh40/3034003_32828781103.html) Make example for this keyboard (after setting up your build environment): - make jj40:default:program + make jj40:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. + make jj40:default:flash -In addition you may need the AVR toolchain and `bootloadHID` ([GitHub repo](https://github.com/whiteneon/bootloadHID)) for flashing: +**Reset Key**: Hold down the *Top Right Key* key, commonly programmed as *Backspace* while plugging in the keyboard. -For macOS: -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -For Linux: -``` -$ sudo apt install libusb-dev -$ wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -$ tar -xzf bootloadHID.2012-12-08.tar.gz -$ cd bootloadHID.2012-12-08/commandline -$ make -$ sudo cp bootloadHID /usr/bin -``` - -In order to use the `././util/atmega32a_program.py` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -If you prefer (or are having issues with a `program` flash), you can just build it (`make jj40:` and flash the firmware (`.hex` file) directly with -`bootloadHID` if you boot the board while holding down `Backspace` (`Top Right Key`) to keep it -in the bootloader: - -``` -$ make jj40 -$ bootloadHID -r jj40_default.hex -``` - -For Windows 10: -Windows sometimes doesn't recognize the jj40. The easiest way of flashing a new layout is probably using [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -1. Go to Windows Device Manager and find the keyboard (plug it in while holding down `Backspace` (`Top Right Key`)). It can be found under Human Interface Devices or under Keyboards. -2. Go to properties and the Details tab to find the hardware ID. You want the VID and the PID (code after the underscore). Plug them into HIDBootFlash and hit Find Device. -3. Use `make jj40:` to generate the .hex file in the qmk basis folder. Select the .hex file in HIDBootFlash and press Flash Device. - - -## Troubleshooting - -1. Try plugging the board in while pressing `Backspace` (`Top Right Key`). This will force it - to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. -3. If you get an error such as "Resource Unavailable" when attemting to flash - on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md` - for more info. - -## Recovery -If you flash a bad hex (e.g. you have a V1 board without RGB and compile/flash blindly without editing your rules.mk), your jj40 is now semi-bricked and you're stuck unless you have access to an ISP. The [ISP Flashing Guide](https://docs.qmk.fm/#/isp_flashing_guide) contains very good (but somewhat generalized) information. However, the instructions below should get you up and running provided you have an Arduino or clone. - -### Arduino Setup -1. Upload the ArduinoISP sketch onto your Arduino board (https://www.arduino.cc/en/Tutorial/ArduinoISP). -2. Wire the Arduino to the jj40. Match the data pins on the Arduino to those on the jj40. "RST" usually goes to D10 on the Arduino. I didn't need a capacitor when using my Uno. -![Imgur](https://i.imgur.com/oLWJOkQ.jpg) -3. Get a working bootloader from https://blog.winkeyless.kr/m/152. The file is called "main.hex" from the archive called "ps2avrGB_bootloader_161215.zip" Copy "main.hex" to your qmk folder. -4. Burn the bootloader with the following command -` avrdude -b 19200 -c avrisp -p atmega32 -v -e -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m -U flash:w:main.hex:i -P comPORT` -Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux. -5. If this process is successful, you should now be able to upload normally. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jj4x4/README.md b/keyboards/jj4x4/README.md index 29dc2605de..a7c93c930f 100644 --- a/keyboards/jj4x4/README.md +++ b/keyboards/jj4x4/README.md @@ -2,70 +2,20 @@ ![jj4x4](https://cdn.shopify.com/s/files/1/2711/4238/products/JJ4x4case-1_1024x1024.jpg?v=1532325339) -A 4x4 keypad kit made and KPRepublic on AliExpress. This is a chopped off version of the jj40 with rearranged keys. +A 4x4 keypad kit made and KPRepublic on AliExpress. This is a chopped off version of the jj40 with rearranged keys. -Keyboard Maintainer: [QMK Community](https://github.com/qmk) -Hardware Supported: Atmega32A -Hardware Availability: [AliExpress](https://www.aliexpress.com/item/jj4x4-jj4X4-16-keys-Custom-Mechanical-Keyboard-PCB-programmed-numpad-layouts-bface-firmware-with-rgb-bottom/32901955446.html?spm=2114.search0104.3.7.3ebf431ae1d9ic&ws_ab_test=searchweb0_0,searchweb201602_4_10065_10130_10068_10547_319_317_10548_10545_10696_453_10084_454_10083_433_10618_431_10307_537_536_10902_10059_10884_10887_321_322_10103,searchweb201603_6,ppcSwitch_0&algo_expid=9d1891dd-80af-4793-a889-5a62e1fdfdd8-1&algo_pvid=9d1891dd-80af-4793-a889-5a62e1fdfdd8&transAbTest=ae803_5) +* Keyboard Maintainer: [QMK Community](https://github.com/qmk) +* Hardware Supported: Atmega32A +* Hardware Availability: [AliExpress](https://www.aliexpress.com/item/jj4x4-jj4X4-16-keys-Custom-Mechanical-Keyboard-PCB-programmed-numpad-layouts-bface-firmware-with-rgb-bottom/32901955446.html) Make example for this keyboard (after setting up your build environment): - make jj4x4:default:program + make jj4x4:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. + make jj4x4:default:flash -In addition you may need the AVR toolchain and `bootloadHID` ([GitHub repo](https://github.com/whiteneon/bootloadHID)) for flashing: +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *8* while plugging in the keyboard. -For macOS: -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -For Linux: -``` -$ sudo apt install libusb-dev -$ wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -$ tar -xzf bootloadHID.2012-12-08.tar.gz -$ cd bootloadHID.2012-12-08/commandline -$ make -$ sudo cp bootloadHID /usr/bin -``` - -In order to use the `./util/atmega32a_program.py` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -If you prefer (or are having issues with a `program` flash), you can just build it (`make jj40:` and flash the firmware (`.hex` file) directly with -`bootloadHID` if you boot the board while holding down `8` (second from top, second from left, with usb plug is at the top) to keep it -in the bootloader: - -``` -$ make jj40 -$ bootloadHID -r jj4x4_default.hex -``` - -For Windows 10: -Windows sometimes doesn't recognize the jj4x4. The easiest way of flashing a new layout is probably using [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -1. Go to Windows Device Manager and find the keyboard (plug it in while holding down `8` (second from top, second from left, with usb plug is at the top)). It can be found under Human Interface Devices or under Keyboards. -2. Go to properties and the Details tab to find the hardware ID. You want the VID and the PID (code after the underscore). Plug them into HIDBootFlash and hit Find Device. -3. Use `make jj4x4:` to generate the .hex file in the qmk basis folder. Select the .hex file in HIDBootFlash and press Flash Device. - - -## Troubleshooting - -1. Try plugging the board in while pressing `8` (usb plug at top, second from top, second from left). This will force it - to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. -3. If you get an error such as "Resource Unavailable" when attemting to flash - on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md` - for more info. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jj50/README.md b/keyboards/jj50/README.md index f7b8acc641..2d3e711bec 100644 --- a/keyboards/jj50/README.md +++ b/keyboards/jj50/README.md @@ -1,83 +1,19 @@ -JJ50 -========================== +# JJ50 -This is a port of the QMK firmware for boards that are based on the -ps2avrGB firmware, like the [ps2avrGB keyboard](https://www.keyclack.com/product/gb-ps2avrgb/), for use on the JJ50, a preonic-like board. +A preonic-like board -Most of the code was taken and amended from YMD96, which in itself was taken from ps2avrGB and amended by Andrew Novak. - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. - -Hardware Supported: JJ50 with the ATmega32a chip. -Hardware Availability: [KPrepublic on AliExpress](https://www.aliexpress.com/item/jj50-v1-0-Custom-Mechanical-Keyboard-50-PCB-programmed-50-preonic-layouts-bface-firmware-with-rgb/32848915277.html) - -This version by [Wayne K. Jones](github.com/WarmCatUK). - - -## Installing and Building +* Keyboard Maintainer: [Wayne K. Jones](github.com/WarmCatUK) +* Hardware Supported: JJ50 with the ATmega32a chip. +* Hardware Availability: [KPrepublic on AliExpress](https://www.aliexpress.com/item/jj50-v1-0-Custom-Mechanical-Keyboard-50-PCB-programmed-50-preonic-layouts-bface-firmware-with-rgb/32848915277.html) Make example for this keyboard (after setting up your build environment): -``` -$ make jj50:default:program -``` -It should detect the keyboard and set it to bootloader mode automatically, prior to flashing firmware. - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. -In addition you may need the AVR toolchain and `bootloadHID` for flashing: - -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -In order to use the `././util/atmega32a_program.py` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -If you prefer, you can just build it and flash the firmware directly with -`bootloadHID` if you boot the board while holding down `Backspace` (`key below top right key`) to keep it -in the bootloader: - -``` -$ make jj50 -$ bootloadHID -r jj50_default.hex -``` -I dont use windows personally, but the following is from ymd96 regarding flashing the atmega32a: - -Since the JJ50 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. If anyone knows of a Linux/Mac bootflasher that works, edit this readme! -On Windows, I use [MINGw](http://www.mingw.org/) to compile the keymaps. On Linux or OSX you can simply use the terminal. - -Once you have those two pieces of software: -Build the keyboard with -``` -$ make jj50:default -``` -If you make your own layout, change the `default` word to whatever your layout is. - -And flash the compiled hex file with `HIDBootFlash`. Simply put the board in flashing mode by plugging it in while holding the key below the top right key, and click `find device`. Then you can specify the .hex file and flash it to the device. - - -## Troubleshooting + make jj50:default -1. Try plugging the board in while pressing `Backspace` (`Key below the top right key`). This will force it to boot only the bootloader without loading the firmware. Once this is done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly to your computer or plugging/unplugging the USB hub. -3. If you get an error such as "Resource Unavailable" when attemting to flash on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md` for more info. -4. I was occasionally finding that I wasn't flashing changes that I was making to my keymap. If that happens, remove the previous build and simply force rebuild by making with: -``` -$ rm jj50_default.hex -$ make -B jj50:default -$ make -B jj50:default:program -``` +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + make jj50:default:flash +**Reset Key**: Hold down the key `Backspace` (`Key below the top right key`) while plugging in the keyboard. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbdpad/mk1/readme.md b/keyboards/kbdfans/kbdpad/mk1/readme.md index e808d89347..2424d4d4d6 100644 --- a/keyboards/kbdfans/kbdpad/mk1/readme.md +++ b/keyboards/kbdfans/kbdpad/mk1/readme.md @@ -1,47 +1,19 @@ # KBDPad MKI -Custom numpad. - -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: KBDPad MKI -Hardware Availability: [KBDfans](https://kbdfans.com/products/kbdfans-pad-custom-mechanical-keyboard-diy-kit) +Custom numpad. +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: KBDPad MKI +* Hardware Availability: [KBDfans](https://kbdfans.com/products/kbdfans-pad-custom-mechanical-keyboard-diy-kit) Make example for this keyboard (after setting up your build environment): make kbdfans/kbdpad/mk1:default -Flashing +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make kbdfans/kbdpad/mk1:default:flash **Reset Key:** Hold down the key located at `K00`, commonly programmed as `0` while plugging in the keyboard. -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - - See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/leeku/finger65/readme.md b/keyboards/leeku/finger65/readme.md index c800f3af3a..c27ce5d489 100644 --- a/keyboards/leeku/finger65/readme.md +++ b/keyboards/leeku/finger65/readme.md @@ -1,16 +1,16 @@ -# Leeku Finger65 PCB +# Leeku Finger65 + +**This PCB is not QMK ready by default**. If you want to use your Leeku Finger65 PCB with QMK, you **must** ISP Flash the Leeku PCB using the bootloader for the atmega32a that resides in the `util/` folder. * Keyboard Maintainer: [sidcarter](https://github.com/sidcarter) * Hardware Supported: LeeKu Finger65 PCB, atmega32a -* Make example for this keyboard (after setting up your build environment): +Make example for this keyboard (after setting up your build environment): make leeku/finger65:default -* This PCB is not QMK ready by default. If you want to use your Leeku Finger65 PCB with QMK, you must: +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) - * ISP Flash the Leeku PCB using the bootloader for the atmega32a that resides in the `util/` folder - * Build and install [bootloadHID](https://www.obdev.at/products/vusb/bootloadhid.html) on your system - * You can then do a `make leeku/finger65:default:flash` to flash your PCB with QMK + make leeku/finger65:default:flash -* See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechmini/v1/README.md b/keyboards/mechmini/v1/README.md index 315349803a..902948c24d 100644 --- a/keyboards/mechmini/v1/README.md +++ b/keyboards/mechmini/v1/README.md @@ -1,83 +1,19 @@ -Mechmini V1 -=========== +# Mechmini V1 A 40% ortholinear/staggered keyboard, that was originally bootmapper and can be ported to QMK following this readme. This version is no longer in production [More info on MECHKEYS](https://mechkeys.ca). -Keyboard Maintainer: QMK Community -Hardware Supported: Mechmini 1 PCB -Hardware Availability: Version 1 (Bootmapper) no longer in production [MECHKEYS](https://mechkeys.ca) +* Keyboard Maintainer: QMK Community +* Hardware Supported: Mechmini 1 PCB +* Hardware Availability: Version 1 (Bootmapper) no longer in production [MECHKEYS](https://mechkeys.ca) Make example for this keyboard (after setting up your build environment): make mechmini/v1:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -## Mechmini Notes - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. - -## Installing - -First, install the requirements. These commands are for OSX, but all you -need is the AVR toolchain and `bootloadHID` for flashing: - -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -In order to use the `./util/atmega32a_program.py` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -Then, with the keyboard plugged in, simply run this command from the -`qmk_firmware` directory: - -``` -$ make mechmini:program -``` - -If you prefer, you can just build it and flash the firmware directly with -`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it -in the bootloader: - -``` -$ make mechmini -$ bootloadHID -r mechmini_default.hex -``` - -## Troubleshooting - -From my experience, it's really hard to brick these boards. But these -tricks have been useful when it got stuck in a weird scenario. - -1. Try plugging the board in while pressing `L_Ctrl`. This will force it - to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. -3. If errors happen with -`./tmk_core/common/avr/suspend.c` it is likely you implemented a RGB underglow sleep setting previously. Simply comment out the following code found under `void suspend_wakeup_init(void)`: -``` -ifdef RGBLIGHT_ANIMATIONS - rgblight_timer_enable(); - _delay_ms(50); - rgblight_set(); -#endif -``` -So that the resulting code should know reflect: -``` -/*#ifdef RGBLIGHT_ANIMATIONS - rgblight_timer_enable(); - _delay_ms(50); - rgblight_set(); -#endif*/ -``` + make mechmini/v1:default:flash +**Reset Key**: Hold down the key commonly programmed as *L_Ctrl* while plugging in the keyboard. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mehkee96/readme.md b/keyboards/mehkee96/readme.md index a06f2e33e6..ff1a6e201a 100644 --- a/keyboards/mehkee96/readme.md +++ b/keyboards/mehkee96/readme.md @@ -4,43 +4,16 @@ 96-key Keyboard from mehkee -Keyboard Maintainer: [johanntang](https://github.com/johanntang) -Hardware Supported: mehkee96 -Hardware Availability: [mehkee, group buy closed](https://mehkee.com/products/96kee?variant=46912017423) +* Keyboard Maintainer: [johanntang](https://github.com/johanntang) +* Hardware Supported: mehkee96 +* Hardware Availability: [mehkee, group buy closed](https://mehkee.com/products/96kee?variant=46912017423) Make example for this keyboard (after setting up your build environment): make mehkee96:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python - brew install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + make mehkee96:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mt40/readme.md b/keyboards/mt40/readme.md index aba5fa0d0c..5fc82d89a7 100644 --- a/keyboards/mt40/readme.md +++ b/keyboards/mt40/readme.md @@ -1,16 +1,19 @@ -# MT40: An 40% Ortholinear Keyboard +# MT40 -## Program +[MT40](https://i.imgur.com/0opsDkt.jpg) -`make mt40:default:program` +A 40% Ortholinear Keyboard -## Pictures +* Keyboard Maintainer: QMK Community +* Hardware Supported: MT40 +* Hardware Availability: -[PCB](https://i.imgur.com/8BeeY07.jpg) -[Backview of the PCB](https://i.imgur.com/0opsDkt.jpg) -[Board with Sleeve](https://i.imgur.com/44FhPU8.jpg) +Make example for this keyboard (after setting up your build environment): -## Buy + make mt40:default -https://world.taobao.com/item/548335974877.htm?fromSite=main&spm=a312a.7700824.w4002-6810221593.51.670e68a08mRh69 +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + make mt40:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/panc60/readme.md b/keyboards/panc60/readme.md index 3312a07ce7..52dcc4ccea 100644 --- a/keyboards/panc60/readme.md +++ b/keyboards/panc60/readme.md @@ -4,45 +4,18 @@ The panc60 is a 60% PCB with backlight and rgb underglow. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Jack Humbert](https://github.com/jackhumbert) -Hardware Supported: panc60 PCB -Hardware Availability: [PANC Interactive](https://store.panc.co/product/panc60-60-pcb) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Jack Humbert](https://github.com/jackhumbert) +* Hardware Supported: panc60 PCB +* Hardware Availability: [PANC Interactive](https://store.panc.co/product/panc60-60-pcb) Make example for this keyboard (after setting up your build environment): make panc60:default -Flashing - -**Reset Key:** Hold down the key located at `K40`, commonly programmed as left control while plugging in the keyboard. - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -To put the panc60 into reset, hold left control while plugging in. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make panc60:default:flash + +**Reset Key**: Hold down the key located at *K40*, commonly programmed as *left control* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/pearl/readme.md b/keyboards/pearl/readme.md index c39d86cf3d..1f78a5540a 100644 --- a/keyboards/pearl/readme.md +++ b/keyboards/pearl/readme.md @@ -3,45 +3,18 @@ Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel ATMEGA32A MCU. -Keyboard Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo) -Hardware Supported: Pearl -Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=92259.0) +* Keyboard Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo) +* Hardware Supported: Pearl +* Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=92259.0) Make example for this keyboard (after setting up your build environment): make pearl:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** Hold down the key located at `K00`. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - -**Please Note:** You will need to use the `EEP_RST` keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make pearl:default:flash + +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *Esc* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/percent/canoe/readme.md b/keyboards/percent/canoe/readme.md index 45773e4683..d8a496f26c 100644 --- a/keyboards/percent/canoe/readme.md +++ b/keyboards/percent/canoe/readme.md @@ -2,43 +2,16 @@ A 65% keyboard with some RGB -Keyboard Maintainer: QMK Community -Hardware Supported: Canoe -Hardware Availability: https://geekhack.org/index.php?topic=92418.0 +* Keyboard Maintainer: QMK Community +* Hardware Supported: Canoe +* Hardware Availability: Make example for this keyboard (after setting up your build environment): make percent/canoe:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + make percent/canoe:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/percent/skog/README.md b/keyboards/percent/skog/README.md index 5b7dacd915..9f76110cde 100644 --- a/keyboards/percent/skog/README.md +++ b/keyboards/percent/skog/README.md @@ -1,45 +1,17 @@ # Skog TKL -Keyboard Maintainer: QMK Community -Hardware Supported: Skog PCB -Hardware Availability: https://geekhack.org/index.php?topic=87953.0 +* Keyboard Maintainer: QMK Community +* Hardware Supported: Skog PCB +* Hardware Availability: Make example for this keyboard (after setting up your build environment): make percent/skog:default -Flashing +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make percent/skog:default:flash -**Reset Key:** Hold down the key located at `K00`, commonly programmed as Pause while plugging in the keyboard. +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *Pause* while plugging in the keyboard. -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - -**Please Note:** You will need to use the `EEP_RST` keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work. - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/percent/skog_lite/readme.md b/keyboards/percent/skog_lite/readme.md index 369129e86f..72ca797254 100644 --- a/keyboards/percent/skog_lite/readme.md +++ b/keyboards/percent/skog_lite/readme.md @@ -2,47 +2,18 @@ TKL Custom Keyboard. - -Keyboard Maintainer: [mechmerlin](https://github.com/mechmerlin) -Hardware Supported: Skog Lite PCB -Hardware Availability: [Kono Store](https://kono.store/products/skog-lite) - +* Keyboard Maintainer: [mechmerlin](https://github.com/mechmerlin) +* Hardware Supported: Skog Lite PCB +* Hardware Availability: [Kono Store](https://kono.store/products/skog-lite) Make example for this keyboard (after setting up your build environment): make percent/skog_lite:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** Hold down the key located at `K05`, commonly programmed as `F5` while plugging in the keyboard. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make percent/skog_lite:default:flash +**Reset Key**: Hold down the key located at *K05*, commonly programmed as *F5* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/singa/readme.md b/keyboards/singa/readme.md index faeb816ec1..e3b87092ec 100644 --- a/keyboards/singa/readme.md +++ b/keyboards/singa/readme.md @@ -1,52 +1,22 @@ # Singa - ![Singa](https://i.imgur.com/VVO27Tr.jpg) - 75% Custom Keyboard. - -Keyboard Maintainer: [amnesia0287](https://github.com/amnesia0287) -Hardware Supported: TGR-Elaine v1.0 PCB -Hardware Availability: http://singakbd.com/ +* Keyboard Maintainer: [amnesia0287](https://github.com/amnesia0287) +* Hardware Supported: TGR-Elaine v1.0 PCB +* Hardware Availability: http://singakbd.com/ Make example for this keyboard (after setting up your build environment): make singa:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** Hold down the key located at `K00`, commonly programmed as `Esc` while plugging in the keyboard. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make singa:default:flash +**Reset Key:** Hold down the key located at `K00`, commonly programmed as `Esc` while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/tgr/alice/readme.md b/keyboards/tgr/alice/readme.md index f5db63814b..a08aaf71ba 100644 --- a/keyboards/tgr/alice/readme.md +++ b/keyboards/tgr/alice/readme.md @@ -4,45 +4,18 @@ An ergonomic 60% keyboard. -Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury) -Hardware Supported: TGR Alice -Hardware Availability: Group buy finished +* Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury) +* Hardware Supported: TGR Alice +* Hardware Availability: Group buy finished Make example for this keyboard (after setting up your build environment): make tgr/alice:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** Hold down the key located at `K00`, commonly programmed as `Esc` while plugging in the keyboard. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + make tgr/alice:default:flash + +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *Esc* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/tgr/jane/readme.md b/keyboards/tgr/jane/readme.md index 10986cde33..5c5a2d92d3 100644 --- a/keyboards/tgr/jane/readme.md +++ b/keyboards/tgr/jane/readme.md @@ -2,46 +2,18 @@ TKL Custom Keyboard. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: TGR Jane (Pontoporia) PCB v1.1, v1.2 -Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=97552.1200) - +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: TGR Jane (Pontoporia) PCB v1.1, v1.2 +* Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=97552.1200) Make example for this keyboard (after setting up your build environment): make tgr/jane:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** Hold down the key located at `K00`, commonly programmed as `Esc` while plugging in the keyboard. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make tgr/jane:default:flash +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *Esc* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/unikorn/readme.md b/keyboards/unikorn/readme.md index 1f8b16d649..1383e18518 100644 --- a/keyboards/unikorn/readme.md +++ b/keyboards/unikorn/readme.md @@ -2,59 +2,29 @@ 60% PCB made for the TGR x SINGA Unikorn60. - -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: Unikorn 60 PCB -Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=98350.0) - +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: Unikorn 60 PCB +* Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=98350.0) Make example for this keyboard (after setting up your build environment): make unikorn:default -This PCB can support RGB underglow. There are pads on the bottom of the PCB for the LED controller chip and for 17 RGB underglow LEDs. The Unikorn 60 case does not have acrylic pieces to properly display underglow effects. - -To enable RGB lighting support, install the necessary components and set RGBLIGHT features in `rules.mk` like so: - -``` -RGBLIGHT_ENABLE = yes -``` - - -Flashing +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make unikorn:default:flash -**Reset Key:** Short the two holes labeled `FW_JP` underneath the PCB, beside the Tab key while plugging in the keyboard. +**Reset Key**: Short the two holes labeled `FW_JP` underneath the PCB, beside the Tab key while plugging in the keyboard. Do not confuse this with the LED holes of the switch in the `Tab` position. `FW_JP` is not reachable from the top as the plate blocks access to it. -It is recommended to program a `RESET` key in your keymap. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). +## RGB Underglow +This PCB can support RGB underglow. There are pads on the bottom of the PCB for the LED controller chip and for 17 RGB underglow LEDs. The Unikorn 60 case does not have acrylic pieces to properly display underglow effects. -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). +To enable RGB lighting support, install the necessary components and set RGBLIGHT features in `rules.mk` like so: + +```makefile +RGBLIGHT_ENABLE = yes +``` diff --git a/keyboards/winkeyless/bface/README.md b/keyboards/winkeyless/bface/README.md index da0eb8088b..ab39a97db0 100644 --- a/keyboards/winkeyless/bface/README.md +++ b/keyboards/winkeyless/bface/README.md @@ -2,45 +2,18 @@ A 60% keyboard with RGB that runs ps2avrgb natively. Please note that the B.face and B.fake have different switch matrices. Firmware on one, will not work on the other. -Keyboard Maintainer: QMK Community -Hardware Supported: B.face PCB -Hardware Availability: [Winkeyless](https://winkeyless.kr/product/b-face-x2-pcb/) +* Keyboard Maintainer: QMK Community +* Hardware Supported: B.face PCB +* Hardware Availability: [Winkeyless](https://winkeyless.kr/product/b-face-x2-pcb/) Make example for this keyboard (after setting up your build environment): make winkeyless/bface:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** Hold down the key located at K00, commonly programmed as left control while plugging in the keyboard. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python - pip3 install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + make winkeyless/bface:default:flash + +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *left control* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/winkeyless/bmini/readme.md b/keyboards/winkeyless/bmini/readme.md index 3401b97444..b8cc854950 100644 --- a/keyboards/winkeyless/bmini/readme.md +++ b/keyboards/winkeyless/bmini/readme.md @@ -2,42 +2,18 @@ A 75% keyboard with RGB -Keyboard Maintainer: QMK Community -Hardware Supported: B.mini PCB -Hardware Availability: http://winkeyless.kr/product/b-mini-x2-pcb/ +* Keyboard Maintainer: QMK Community +* Hardware Supported: B.mini PCB +* Hardware Availability: Make example for this keyboard (after setting up your build environment): make winkeyless/bmini:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python - brew install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + make winkeyless/bmini:default:flash + +**Reset Key**: Hold down the key located at *LOCATION*, commonly programmed as *KEY* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/winkeyless/bminiex/readme.md b/keyboards/winkeyless/bminiex/readme.md index 7dbabedbaf..31a9e2608f 100644 --- a/keyboards/winkeyless/bminiex/readme.md +++ b/keyboards/winkeyless/bminiex/readme.md @@ -2,12 +2,16 @@ A compact fullsize keyboard with RGB -Keyboard Maintainer: QMK Community -Hardware Supported: B.mini EX PCB -Hardware Availability: https://winkeyless.kr/product/b-mini-ex-x2-pcb/ +* Keyboard Maintainer: QMK Community +* Hardware Supported: B.mini EX PCB +* Hardware Availability: Make example for this keyboard (after setting up your build environment): make winkeyless/bminiex:default +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make winkeyless/bminiex:default:flash + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ymd75/README.md b/keyboards/ymd75/README.md index d1c4e95ae7..9a618c5943 100644 --- a/keyboards/ymd75/README.md +++ b/keyboards/ymd75/README.md @@ -1,83 +1,19 @@ -YMD75 / MT84 -========================== +# YMD75 / MT84 -This is a port of the QMK firmware for boards that are based on the -ps2avrGB firmware, like the [ps2avrGB keyboard] (https://www.keyclack.com/product/gb-ps2avrgb/), for use on the YMD75, from YMDK. YMDK sell the board and name it "YMD75", however the PCB has "MT84" printed on both sides. +75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however the PCB has "MT84" printed on both sides. -Most of the code was taken and amended from YMD96 and my port JJ50, which in itself was taken from ps2avrGB and amended by Andrew Novak. - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. - -Hardware Supported: YMD75/MT84 with the ATmega32a chip. -Hardware Availability: The YMD75/MT84 PCB is available from YMDK on AliExpress and suchlike. - -This version by Wayne K Jones (github.com/WarmCatUK) - -## Installing and Building +* Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK) +* Hardware Supported: YMD75/MT84 with the ATmega32a chip. +* Hardware Availability: Make example for this keyboard (after setting up your build environment): -``` -$ make ymd75:default:program -``` -It should detect the keyboard and set it to bootloader mode automatically, prior to flashing firmware. -I've found that I need to remove the previous build/file before making a new one as it doesn't overwrite it; but this might just be my personal experience. - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. - -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. -In addition you may need the AVR toolchain and `bootloadHID` for flashing: - -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -``` - -In order to use the `./util/atmega32a_program.py` script, which can reboot the board into -the bootloader, you'll need Python 2 with PyUSB installed: - -``` -$ pip install pyusb -``` - -If you prefer, you can just build it and flash the firmware directly with -`bootloadHID` if you boot the board while holding down `Left Control` to keep it -in the bootloader: - -``` -$ make ymd75 -$ bootloadHID -r ymd75_default.hex -``` -I dont use windows personally, but the following is from ymd96 regarding flashing the atmega32a: - -Since the YMD75/MT84 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. If anyone knows of a Linux/Mac bootflasher that works, edit this readme! -On Windows, I use [MINGw](http://www.mingw.org/) to compile the keymaps. On Linux or OSX you can simply use the terminal. - -Once you have those two pieces of software: -Build the keyboard with -``` -$ make ymd75:default -``` -If you make your own layout, change the `default` word to whatever your layout is. - -And flash the compiled hex file with `HIDBootFlash`. Simply put the board in flashing mode by plugging it in while holding the key below the top right key, and click `find device`. Then you can specify the .hex file and flash it to the device. - - -## Troubleshooting + make ymd75:default -1. Try plugging the board in while pressing `Backspace` (`Key below the top right key`). This will force it to boot only the bootloader without loading the firmware. Once this is done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly to your computer or plugging/unplugging the USB hub. -3. If you get an error such as "Resource Unavailable" when attemting to flash on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md` for more info. -4. I was occasionally finding that I wasn't flashing changes that I was making to my keymap. If that happens, remove the previous build and simply force rebuild by making with: -``` -$ rm ymd75_default.hex -$ make -B ymd75:default -$ make -B ymd75:default:program -``` +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + make ymd75:default:flash +**Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ymd96/readme.md b/keyboards/ymd96/readme.md index 9cb3760582..59d6b73379 100644 --- a/keyboards/ymd96/readme.md +++ b/keyboards/ymd96/readme.md @@ -1,63 +1,19 @@ -YMD96 -========================== +# YMD96 -This is a port of the QMK firmware for boards that are based on the -ps2avrGB firmware, like the [ps2avrGB -keyboard](https://www.keyclack.com/product/gb-ps2avrgb/), for use on the YMD96. +A 96-keyboard which supports both ANSI and ISO along with many different layout combinations, and RGB underglow. -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. +* Keyboard maintainer: [Andrew](https://github.com/sparkyman215) +* Hardware Supported: YMD96 with the ATmega32a chip. +* Hardware Availability: The GB was run June 2017, [in this thread](https://www.reddit.com/r/mechmarket/comments/6hu3yx/vendor_ymd96_gb_is_now_live_68_an_universal_and/). The vendor has stated that they plan on selling more rounds. -Here is the default layout, it is fairly simple with a few function keys: -![YMD96 Layout](https://i.imgur.com/3QnqVPn.png) -If you have a different layout (since there were many options during the GB), please feel free to contribute! +Make example for this keyboard (after setting up your build environment): -Keyboard maintainer: [Andrew](https://github.com/sparkyman215) -Hardware Supported: YMD96 with the ATmega32a chip. -Hardware Availability: The GB was run June 2017, [in this thread](https://www.reddit.com/r/mechmarket/comments/6hu3yx/vendor_ymd96_gb_is_now_live_68_an_universal_and/). The vendor has stated that they plan on selling more rounds. + make ymd96:default -A very big thanks to @krusli for making the RGB underglow, Backlight, CapsLock and NumLock LEDs working correctly. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -## Finding your specific matrix + make ymd96:default:flash -This firmware was modified from [ps2avrGB](https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB), also found on this qmk repo, to work with the YMD96 keyboard. However, I only have one board to test with, which might have a different layout than yours. To get qmk working with your specific layout, you'll need to follow these steps: +**Reset Key**: Hold down the key commonly programmed as *L_Ctrl* while plugging in the keyboard. -1. Follow the [guide here](https://www.massdrop.com/talk/1392/programming-kbd-keyboards-via-bootmapper-client) to get Bootmapper Client setup. While you won't need it after you get qmk working, you need to use Bootmapper Client to figure out how the matrix is laid out. In the end, here's an example of what it should look like: ![BMC](https://i.imgur.com/wNihDwn.png) -2. Next is the tricky part: editing the `ymd96.h` file. Here, you have to figure out how the keys are laid out physically and assign each key the right keycode. Study how the codes in brackets correspond to the BMC columns. Consider the first column: K000 corresponds to Col 1 Row 1, and K100 corresponds to Col 2 Row 1. K111 = Col 2 Row 10. -3. First, you need to define the codes that are actually used in the brackets. KC_NO is used whenever a cell isn't used, such as col 1 row 4-6 in BMC. -4. Once you have all those set up, you need to put the keycodes where they physically are in the KEYMAP( area. Since the columns aren't all uniform (e.g. col2row6 is B, but col2row7 is the numpad 1), the keycodes will be all over the place. -5. Finally! Hard part is pretty much done. Next, you simply have to edit the `keymap.c` file to actually assign the keycodes to do something. You essentially replace the keycodes (e.g. K000) with actual codes that do something, e.g. KC_ENTER. Modify these to your hearts content, and of course this is where all the extra functionality of QMK shines. I won't get into it here, but hopefully you've made it this far! - -## Installing and Building - -Since the YMD96 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. For Linux you can use the [bootloadHID](https://www.obdev.at/products/vusb/bootloadhid.html) utility (which will require building). Arch Linux users can alternatively install this from the [AUR](https://aur.archlinux.org/packages/bootloadhid/). -On Windows, I use [MINGw](http://www.mingw.org/) to compile the keymaps. On Linux, you can simply use the terminal. - -Once you have those two pieces of software: -Build the keyboard by navigating to the root folder of the QMK repo and running -``` -$ make ymd96:default -``` -If you make your own layout, change the `default` word to whatever your layout is. - -To flash the compiled hex file, simply put the board in flashing mode by plugging it in while holding control. -In `HIDBootFlash` first click `find device`, then you can specify the .hex file and flash it to the device. -For `bootloadHID`, from a terminal that is in the same folder as your firmware file, run -``` -$ sudo bootloadHID ymd96_default.hex -``` -Again replacing default with your custom keymap name if required. - -## Troubleshooting - -From my experience, it's really hard to brick these boards. But these -tricks have been useful when it got stuck in a weird scenario. - -1. Try plugging the board in while pressing `L_Ctrl`. This will force it - to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. - -Lastly, if you still need help, you can add me on Discord and I'll be happy to help. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ymdk/bface/README.md b/keyboards/ymdk/bface/README.md index f6a703bece..04ba680de1 100644 --- a/keyboards/ymdk/bface/README.md +++ b/keyboards/ymdk/bface/README.md @@ -1,55 +1,21 @@ -# The YMDK "Bface" PCB +# The YMDK Bface ![ymdk_bface](https://i.imgur.com/qhFxN0g.jpg) A 60% keyboard that runs ps2avrgb natively and fits the popular GH60 form factor. Another "bfake" or clone of the original B.face PCB by [Winkeyless](https://winkeyless.kr/product/b-face-x2-pcb/). This PCB has slightly different switch matrix than the origninal B.face, and is also different than the bfake. It commonly comes as the PCB in 60% keyboard kits sold by YMDK on Aliexpress. -Keyboard Maintainer: QMK Community -Hardware Supported: White Bface Mini USB PCB with no RGB. -Hardware Availability: [Shenzhen YMD Tech Co. (YMDK) on Aliexpress](https://www.aliexpress.com/item/32799437588.html) +* Keyboard Maintainer: QMK Community +* Hardware Supported: White Bface Mini USB PCB with no RGB. +* Hardware Availability: [Shenzhen YMD Tech Co. (YMDK) on Aliexpress](https://www.aliexpress.com/item/32799437588.html) Make example for this keyboard (after setting up your build environment): make ymdk/bface:default -Flashing: +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make ymdk/bface:default:flash This board has a pair of jumper holes on the left edge of the PCB marked "Jb", near TAB and CAPS LOCK. If you short the contacts with tweezers or wire the board will enter into the bootloader and you can flash it. -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python - pip3 install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset by shorting the jumper on the left edge of the PCB.. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - -Another method for Mac or Linux: -After installing `bootloadHID`, you can use the `./util/atmega32a_program.py` program included in QMK. You will need to have `python` and the `pyusb` library installed. - -Then you can run this to compile the firmware and flash the board without using the jumper: -``` -make ymdk/bface:default:program -``` - See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ymdk_np21/README.md b/keyboards/ymdk_np21/README.md index 79e3386f09..decd30b275 100644 --- a/keyboards/ymdk_np21/README.md +++ b/keyboards/ymdk_np21/README.md @@ -4,14 +4,18 @@ ps2avrGB based number-pad sold fully assembled by YMDK on Aliexpress. -Keyboard Maintainer: [QMK Community](https://github.com/qmk) -Hardware Supported: Atmega32A -Hardware Availability: [AliExpress](https://www.aliexpress.com/item/21-Key-NPKC-Programmable-Cherry-MX-Kailh-Gateron-Switches-Mechanical-Keyboard-Numpad-Free-shipping/32812732361.html) +* Keyboard Maintainer: [QMK Community](https://github.com/qmk) +* Hardware Supported: Atmega32A +* Hardware Availability: [AliExpress](https://www.aliexpress.com/item/21-Key-NPKC-Programmable-Cherry-MX-Kailh-Gateron-Switches-Mechanical-Keyboard-Numpad-Free-shipping/32812732361.html) Make example for this keyboard (after setting up your build environment): - make ymdk_np21:default:program + make ymdk_np21:default -Plugging the board in while pressing 'Top Left Key' (USB on top) will force it to boot bootloader without loading the firmware. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -The code for NP21 is a minor edit of jj40. + make ymdk_np21:default:flash + +**Reset Key**: Hold down the 'Top Left Key' (USB on top) while plugging in the keyboard. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -- cgit v1.2.1