From 4eeafbebabfac04eada98f75dedbecdbbd16298c Mon Sep 17 00:00:00 2001 From: Jay Greco Date: Sat, 13 Aug 2022 06:48:30 -0700 Subject: Add Bit-C PRO converter (#17827) --- .../converters/promicro_to_bit_c_pro/_pin_defs.h | 39 ++++++++++++++++++++++ .../converters/promicro_to_bit_c_pro/converter.mk | 12 +++++++ 2 files changed, 51 insertions(+) create mode 100644 platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h create mode 100644 platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk (limited to 'platforms') diff --git a/platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h b/platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h new file mode 100644 index 0000000000..92e8fbfa1a --- /dev/null +++ b/platforms/chibios/converters/promicro_to_bit_c_pro/_pin_defs.h @@ -0,0 +1,39 @@ +// Copyright 2022 QMK +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +// Left side (front) +#define D3 0U +#define D2 1U +// GND +// GND +#define D1 2U +#define D0 3U +#define D4 4U +#define C6 5U +#define D7 6U +#define E6 7U +#define B4 8U +#define B5 9U + +// Right side (front) +// RAW +// GND +// RESET +// VCC +#define F4 29U +#define F5 28U +#define F6 27U +#define F7 26U +#define B1 22U +#define B3 20U +#define B2 23U +#define B6 21U + +// LEDs (Mapped to R and G channel of the Bit-C PRO's RGB led) +#define D5 16U +#define B0 17U + +// Bit-C LED (mapped to B channel of the Bit-C PRO's RGB led) +#define F0 18U diff --git a/platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk b/platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk new file mode 100644 index 0000000000..c0eaee8593 --- /dev/null +++ b/platforms/chibios/converters/promicro_to_bit_c_pro/converter.mk @@ -0,0 +1,12 @@ +# nullbits Bit-C PRO MCU settings for converting AVR projects +MCU := RP2040 +BOARD := QMK_PM2040 +BOOTLOADER := rp2040 + +# These are defaults based on what has been implemented for RP2040 boards +SERIAL_DRIVER ?= vendor +WS2812_DRIVER ?= vendor +BACKLIGHT_DRIVER ?= software + +# Tell QMK to use the correct 2nd stage bootloader +OPT_DEFS += -DRP2040_FLASH_W25X10CL -- cgit v1.2.1